PDA

View Full Version : [Announce] PSFreedom - an easy way to jailbreak your PS3


Pages : 1 2 3 [4]

MohammadAG
2010-12-08, 17:11
FWIW, can somebody try this in terminal? I wonder if it's a Qt issue...
sudo psfreedom-enable-n900.sh --pl3 --jig
and see if you can get into service mode, if you can, I'll try to solve the issue asap.

Kesse
2010-12-08, 18:01
Should I start PSFreedom after writing that in xterm? My terminal said: "Detected kernel-power, creating symlinks..."

XaTeTb
2010-12-08, 18:21
i'm try in terminal
sudo psfreedom-enable-n900.sh --pl3 --jig
it puts console to pl3 jailbreak mode

TUHTA
2010-12-08, 18:50
Should I start PSFreedom after writing that in xterm? My terminal said: "Detected kernel-power, creating symlinks..."

Same for me...

MohammadAG
2010-12-08, 18:52
No, just plug it into the PS3.

TUHTA
2010-12-08, 18:57
No, just plug it into the PS3.

WHat do you mean?

So i just go to my terminal and do the command that you said without getting root acess?

So it says to me

"Detected stock kernel, creating symlinks..."

What am i going to do now?What i should to do?:confused:

Kesse
2010-12-08, 18:58
I've tried plugging it into my PS3, but nothing happens. But i get the same notification as if I plugged it into my computer (PC suite mode or mass storage)

I might be doing it wrong, however. I can't seem to figure out how the boot thingie works. When I press the eject button on boot, my drive starts to spin up, as if it's trying to detect a medium.

MohammadAG
2010-12-08, 19:01
Just type the command and do what you always did, plug it into the PS3, turn off/on then power + eject.
And sudo = root access.

XaTeTb
2010-12-08, 19:07
1) run x-terminal
2) root (if easyroot installed)
3) type psfreedom-enable-n900.sh --pl3 --jig
you gain "Detected stock kernel, creating symlinks..."
4) switch off power cable
5) connect n900 to right slot of your ps3 (near to BD-rom)
6) reconnect power cable
6) punch ultra combo kick "power+eject!"
7) ignore any splash screens, just wait.
8) enjoy...
As i'm write before this steps turn console on pl3 jailbreak mode. Factory mode don't work anyway.

paddyc1988
2010-12-08, 19:15
I dont really want to sound like a trad, but do we really need to use pl3 since pl3 is for jailbreaking and we are just trying to get in to service mode?

svt
2010-12-08, 20:14
I'm lost ... I would like to downgrade my console, (3.50 -> 3.41).
But I did not understand what steps I should do.

paddyc1988
2010-12-08, 21:06
I'm lost ... I would like to downgrade my console, (3.50 -> 3.41).
But I did not understand what steps I should do.

Well first we need to get into service mode (which ppl are having problems doing)
after we get into factory mode then we have to plug in a usb in the usb slot closest to the disc drive thats in FAT format with only two files, Lv2diag.self FILE 1 and Modified 3.41 PUP and power off
Power back on and your ps3 should install 3.41 and turn itself off
so turn it back on and make sure its on fw 3.41 (also it should be in factory mode)
take out the usb and put in the Lv2diag.self FILE 2 and take out the previous files and restart your ps3 and you should be in 3.41
the files can be downloaded from here.
http://hotfile.com/dl/86801332/bfa5384/dgf.rar.html
but look this is not a comprehensive guide but all the key steps are here if you can get into factory mode then have a search on like ps3hax or psx scene

TUHTA
2010-12-08, 21:25
Any good news about PSfreedom fix?

dashti
2010-12-08, 22:14
i won't to downgrade my ps3 from 3.50 to 3.15 to use linux on it
thanks :D
my n900 update is 20.2010.36-36-2.003

شكرااا محمد على البرنامج الروووعه وتطوراتك الله يوفقك فيه حياتك ان شاء الله

TUHTA
2010-12-08, 22:48
Cmooon My Good Mohammad)))Please Help us!)Fix the issue!

TUHTA
2010-12-09, 01:10
any good news???Mohammad please!!

Thank for your Work,Really need JIG mode!

Pillum
2010-12-09, 02:51
@TUHTA...fix which issue?
psfreedom 0.6 already has jig mode

TUHTA
2010-12-09, 03:00
@TUHTA...fix which issue?
psfreedom 0.6 already has jig mode

The problem is that it doesnt work!:(

mothmanex
2010-12-09, 03:05
any good news???Mohammad please!!

Thank for your Work,Really need JIG mode!

Stop being so annoying, if you want it now, start working instead of being *****ing. Mohammad will post when he have news, not because you are posting the same bloody thing every second he will make it work faster. Besides, he has a real life to!

Pillum
2010-12-09, 03:21
Besides, he has a real life to!

O Rly?!?!? :eek::eek::eek: :confused:

lp4u
2010-12-09, 04:24
thats what i've been saying since yesterday. the jailbreak works but not the service mode

dattadude
2010-12-09, 08:09
firslty!!!

thank you man for all ur hard work. . ur efforts have made the phone even more perfect.

have a query!

wts the jig mode for?

thks in advance!

TUHTA
2010-12-09, 08:17
firslty!!!

thank you man for all ur hard work. . ur efforts have made the phone even more perfect.

have a query!

wts the jig mode for?

thks in advance!

JIG mode puts PS3 Into Service Mode,to do DOwngrade trick to get back from 3.50/3.42 BUT NOT 3.55 to 3.41 or any other firmware and join JB community again and enjoy your BACKED UP games and e.t.c.:D

But it Doesnt work at the moment,Mohammad should fix it in a few minutes.:rolleyes:

XaTeTb
2010-12-09, 09:18
Any chance about ports PSFreedom to n900 NITDROID?

dattadude
2010-12-09, 09:18
JIG mode puts PS3 Into Service Mode,to do DOwngrade trick to get back from 3.50/3.42 BUT NOT 3.55 to 3.41 or any other firmware and join JB community again and enjoy your BACKED UP games and e.t.c.:D

But it Doesnt work at the moment,Mohammad should fix it in a few minutes.:rolleyes:

thks man!!!!!!!!!!!!!

dashti
2010-12-09, 13:35
can i play original game online (GT5 and other) wen i jailbreack it with old update like 3.15 with linux

paddyc1988
2010-12-09, 14:35
can i play original game online (GT5 and other) wen i jailbreack it with old update like 3.15 with linux

NO you can only play online with the latest firmware atm 3.50

Scorpius
2010-12-09, 14:38
NO you can only play online with the latest firmware atm 3.50

I guess you mean 3.55 which is the latest firmware right now.

paddyc1988
2010-12-09, 14:55
I guess you mean 3.55 which is the latest firmware right now.

yer my bad just trying to be quick

dashti
2010-12-09, 16:27
thanks for help

oren
2010-12-09, 16:38
Hi
I have downloaded PSfreedom 0.6 , I got the PS3 phat with 3.41.
When I try to jailbreak im getting 2 new options in PS3 menu
1. /app_home/PS3_Game/
2. install Package Files
When accsesing the 1st option im getting this error - 80028F14
these 2 options are not really usfull =] and I dont have a backup manger.
So I am missing something can anyone help please?

XaTeTb
2010-12-09, 16:56
YEEES you miss! Read FAQ for gaming and backuping on jailbroken ps3. GOOGLE it.

Queb
2010-12-09, 17:02
I noticed jig mode ?? I assume I can downgrade my ps3 with this ? Can someone help ? thanks

paddyc1988
2010-12-09, 20:16
just to let you all know there is a new way to get bluray working after downgrading,
http://www.ps3hax.net/2010/12/new-bluray-playback-fix-after-downgrade/

nodymoha
2010-12-09, 21:28
oren

install open manager by using "install package files"

"app_home/PS3_game/" use to run game after choosed by open manager

Kesse
2010-12-09, 23:31
I have a quick question - does this include the 3.50 spoof?

lp4u
2010-12-10, 02:17
has psfreedom 0.6 been able to put ps3 in service mode?

XaTeTb
2010-12-10, 03:02
I have a quick question - does this include the 3.50 spoof?
no, because it not necessary, use patch mode in your backup manager, it's allow start some games (Assasins Creeed: brotherhood, CoD Black Ops, Medal of Honor). Sony fix psn bug and nothing to do with 3.50 spoof

has psfreedom 0.6 been able to put ps3 in service mode?
no, yet
we all waiting for fix JIG mode

lp4u
2010-12-10, 04:53
ok i have been able to put it in servie mode. will give a step by step in a few minutes

lp4u
2010-12-10, 05:06
so here it is
1. download the attached file.
2. extract it and do not bother reading the readme file.
3. uninstall any psfreedom(0.6 or other) from your n900.
4. plug in your USB cable, choose Mass storage mode and copy the 3 files in the zip file to the root of mass storage.
5. go to app manager and download rootsh
6. unplug USB cable
7. launch x terminal and type
sudo gainroot
cd MyDocs
sh psfreedom-enable-maemo.sh
8. plug in USB cable and connect to ps3
9. remove power cord, reconnect it and press power and immediately eject

here u r

XaTeTb
2010-12-10, 05:49
nice work, all works, great thx!

bald.eagle.one
2010-12-10, 07:46
so here it is
1. download the attached file.
2. extract it and do not bother reading the readme file.
3. uninstall any psfreedom(0.6 or other) from your n900.
4. plug in your USB cable, choose Mass storage mode and copy the 3 files in the zip file to the root of mass storage.
5. go to app manager and download rootsh
6. unplug USB cable
7. launch x terminal and type
sudo gainroot
cd MyDocs
sh psfreedom-enable-maemo.sh
8. plug in USB cable and connect to ps3
9. remove power cord, reconnect it and press power and immediately eject

here u r

thanks!
does Blue-Ray work after this?
is that all i need to do to downgrade or this is just first step?

XaTeTb
2010-12-10, 08:48
thanks!
does Blue-Ray work after this?
is that all i need to do to downgrade or this is just first step?

Downgrading your PS3 console MAY in SOME cases STOP you from watching any Blu-Ray movies! (Games still work!)

It's just first step, this script turn console into factory mode.

1. Turn console into factory mode as written above. You will see red rectangle in right down corner on tv. (screen http://img189.imageshack.us/img189/1049/20101210001.jpg )
2. Load any blank FAT32 USB flash drive device with 2 files in the root directory:
-1. Modified 3.41 PUP
-2. Lv2Diag.self (File 1)
3. These must be the only files on the USB key and must be placed in the main (root) directory.
4. Insert flash drive into the last USB port to the right the first USB port in from the right side if youre facing the console. Turn the PS3 on and you will see black screen but the PS3 HDD light will flash.
5. The process takes 3-4 minutes for the system to install the old firmware. Towards the end, the power button on the console will start flashing green and then your console will power off.
6. Remove the flash drive and turn on the console, you will still be in Factory Service Mode. Please verify you have downgraded successfully to version 3.41 by going to "System Information".
7. (Optional) If you wish to downgrade to any older firmware you can follow step 1,2 using any regular firmware PUP. (You do not need to use modified custom firmware now that you are on 3.41).
8. Insert USB flash drive back into your PC and delete the PUP and Lv2Diag.self file (File 1) and copy the other Lv2Diag.self (File 2) to the root of the flash drive.
9. Insert USB flash drive back into the same USB port on the PS3 and power on your PS3. After 10 seconds it will power off.
10. Remove USB flash drive and turn on your console again. You will be out of factory service mode and back in retail mode with your chosen firmware version installed. You will need to go through setting up settings configuration.

http://www.sendspace.com/file/qlfoyi

link for downgrade files (Lv2Diag.self file (File 1,2) and Modified 3.41 PUP).

Downgrading your PS3 console MAY in SOME cases STOP you from watching any Blu-Ray movies! (Games still work!)

All this info gained from http://psx-scene.com/ please visit for additional help

oren
2010-12-10, 09:55
oren

install open manager by using "install package files"

"app_home/PS3_game/" use to run game after choosed by open manager
"install package files" is like an empty folder I can't see how can I install this open manager

lp4u
2010-12-10, 10:00
thanks!
does Blue-Ray work after this?
is that all i need to do to downgrade or this is just first step?

don't know. i was already on 3.41. just wanted to test the service mode

lp4u
2010-12-10, 10:01
"install package files" is like an empty folder I can't see how can I install this open manager

download the backup manager u wanna. its a .pkg file. put it on a fat32 pen drive and install on a jailbroken ps3

bald.eagle.one
2010-12-10, 11:57
thanks for the info
i can confirm lp4u's method works
ps3 is in factory/service mode
downloading the files..

lp4u
2010-12-10, 12:37
just downgraded a friend's ps3 and i can confirm bluray works. mine which was also on 3.41 and which i put in service mode also works. cheers

nodymoha
2010-12-10, 12:53
oren

re-reading how to install Backup Manager

my english is bad
i can't explane to you

Arrowflash021
2010-12-10, 13:21
I?m getting a dingoo for christmas. Is there different types of dingoo? Do I need a specific one?I?m still sitting on the 3.41, does it work only from 3.41 or can I update to 3.50 while I wait?Sorry for all the questions, but I?m new with this.

crsnwby
2010-12-10, 13:35
Will my GT5 backup work if I upgrade to 3.50?

paddyc1988
2010-12-10, 15:36
I?m getting a dingoo for christmas. Is there different types of dingoo? Do I need a specific one?I?m still sitting on the 3.41, does it work only from 3.41 or can I update to 3.50 while I wait?Sorry for all the questions, but I?m new with this.

what exactly is a dingoo? do you mean a dongle.
If you have an n900 or n800 you dont need a dongle,

Will my GT5 backup work if I upgrade to 3.50?
dude piracy is bad, mmmkay
the answer is no, if you updated and buy the game then it will work.

piratenratte
2010-12-10, 15:41
...so i did the same way lp4u wrote, but when i switch on my ps3 it turns off allone after about 8 seconds.Any ideas?

lp4u
2010-12-10, 15:57
...so i did the same way lp4u wrote, but when i switch on my ps3 it turns off allone after about 8 seconds.Any ideas?

meaning it works. disconnect the n900 from the ps3 and switch ps3 on. you will be in service mode. enjoy. post if u need any help

piratenratte
2010-12-10, 16:54
now i downloaded the Psfreedom n900 1.1, extracted the files to my /root directoy, and activated them with the terminal like:
chmod +x psfreedom-enable-maemo.sh
chmod +x psfreedom-disable-maemo.sh
/psfreedom-enable-maemo.sh

it jumps in servicemode again, but no install directories known from psfreedom0.5

thanks for your help!

Queb
2010-12-10, 17:12
Just flashed mine to 3.41, bluray still working :)

paddyc1988
2010-12-10, 17:18
it jumps in servicemode again, but no install directories known from psfreedom0.5


do you mean there is no option to install packages on the ps3 when in service mode??

if so then that is ment to happen, service mode is used for downgrading NOT jailbreaking

piratenratte
2010-12-10, 17:27
do you mean there is no option to install packages on the ps3 when in service mode??

if so then that is ment to happen, service mode is used for downgrading NOT jailbreaking

no there is no option like that.
i know, i've got 2 ps3 here, one with 3.5, one with 3.41.

when i tried jb the 3.41 ps3 i downloaded the psfreedom0.6 from application manager. but it turns in service mode, not in jb mode. the led is green, so it shows it worked, but its like i want to downgrade it like the other one. i've deleted the files from mydocs and also thr files from the /root directory.(or do i have to put the 3files in there again to run the psfreedom0.6 fom app manager)?

paddyc1988
2010-12-10, 17:31
did you restart your phone because the service mode will stay enabled untill you do

svt
2010-12-10, 17:51
so here it is
1. download the attached file.
2. extract it and do not bother reading the readme file.
3. uninstall any psfreedom(0.6 or other) from your n900.
4. plug in your USB cable, choose Mass storage mode and copy the 3 files in the zip file to the root of mass storage.
5. go to app manager and download rootsh
6. unplug USB cable
7. launch x terminal and type
sudo gainroot
cd MyDocs
sh psfreedom-enable-maemo.sh
8. plug in USB cable and connect to ps3
9. remove power cord, reconnect it and press power and immediately eject

here u r

So this brings the PS3 (3.50) in service mode?? but that
kernel of the Nokia N900?

piratenratte
2010-12-10, 18:08
another problem appeared...
my ps3 3.41 always starts in servicemode now, even when nothing is connected and whithout using the power+eject trick..

my phone is now free from every psfreedom file, and restarted. now i download the 0.6 verison and install it on my n900.
when i press jb mode pl3modules the led gets green, jb mode hermes modules the led remains red and it always jumps to service mode. language switches to english and the resolution seems to be very low.

XaTeTb
2010-12-10, 18:47
piratenratte
To turn off the Service mode you need copy to any blank usb pendrive formated in fat32 file Lv2diag.self from FILE 2 folder (from this archive http://www.sendspace.com/file/qlfoyi) and insert in right usb port of PS3. Turn ps3 on and then off.

piratenratte
2010-12-10, 19:32
piratenratte
To turn off the Service mode you need copy to any blank usb pendrive formated in fat32 file Lv2diag.self from FILE 2 folder (from this archive http://www.sendspace.com/file/qlfoyi) and insert in right usb port of PS3. Turn ps3 on and then off.

thats what i needed! Thank you very much!!! You saved my weekend ;)

Edit: You totally saved my we, ac b is running hehe very nice!

crsnwby
2010-12-10, 21:40
you dont need this to run AC BH. You just use a different version of open manager.

finalfantasyx
2010-12-10, 23:11
so is the psfreedom 0.6 now working to downgrade 3.50 or we ll need wait a lil more
keep the good work guys
thx (mohamedAG & kakaRoTo & Bash)

ajamils
2010-12-11, 00:45
so is the psfreedom 0.6 now working to downgrade 3.50 or we ll need wait a lil more
keep the good work guys
thx (mohamedAG & kakaRoTo & Bash)

I would like to know this as well because I'm about to update my firmware to 3.50

lp4u
2010-12-11, 02:18
I would like to know this as well because I'm about to update my firmware to 3.50

piss off psfreedom 0.6. use the method i gave you

finalfantasyx
2010-12-11, 06:25
What about losing BD playback is there any fix for that Issue

eme
2010-12-11, 06:46
the gui works perfect, if you are incompetent to use it its not the problem of the app.

dont cry arround, be happy that mohammed support us.
don ask 100 times the same question, try to solve it on the own way!!!!

svt
2010-12-11, 09:41
so here it is
1. download the attached file.
2. extract it and do not bother reading the readme file.
3. uninstall any psfreedom(0.6 or other) from your n900.
4. plug in your USB cable, choose Mass storage mode and copy the 3 files in the zip file to the root of mass storage.
5. go to app manager and download rootsh
6. unplug USB cable
7. launch x terminal and type
sudo gainroot
cd MyDocs
sh psfreedom-enable-maemo.sh
8. plug in USB cable and connect to ps3
9. remove power cord, reconnect it and press power and immediately eject

here u r

Sorry, what kernel version is used?
power-kernel46??

Arrowflash021
2010-12-12, 22:20
what exactly is a dingoo? do you mean a dongle.
If you have an n900 or n800 you dont need a dongle,



Dingoo is a game handheld device that can also jailbrake the ps3.

I don't have a phone or other device to jailbrake at the moment.

I know dingoo also has downgrade support, of why I ask if I could update.

Maybe the downgrade only works if one is still on 3.41, I don't know...

finalfantasyx
2010-12-13, 09:04
I?m getting a dingoo for christmas. Is there different types of dingoo? Do I need a specific one?I?m still sitting on the 3.41, does it work only from 3.41 or can I update to 3.50 while I wait?Sorry for all the questions, but I?m new with this.
PSFreedom JIG Dingoo v1.0
Description:
"PSFreedom JIG" for Dingoo is a special version of "PSFreedom" created to behave as the JIG device. Thanks to this any user can enable the factory/service mode in his PS3.
its work on 3.50
u can download it from here

http://www.megaupload.com/?d=J8QWDP11

paddyc1988
2010-12-13, 16:39
Dingoo is a game handheld device that can also jailbrake the ps3.

I don't have a phone or other device to jailbrake at the moment.

I know dingoo also has downgrade support, of why I ask if I could update.

Maybe the downgrade only works if one is still on 3.41, I don't know...

Just wondering why of all places to go to ask this question do you come here?
This is a forum dedicated to the maemo operating system! there are many forums dedicated to jailbreaking the ps3 and yet you come here to ask. kinda funny dont you think?

Arrowflash021
2010-12-13, 21:41
Just wondering why of all places to go to ask this question do you come here?
This is a forum dedicated to the maemo operating system! there are many forums dedicated to jailbreaking the ps3 and yet you come here to ask. kinda funny dont you think?

I'm sorry, I got to this place as I was trying to find a specific information, in which was discussed here. From the thread title I assumed it was a general discussion, I apologise for the error in my part.

paddyc1988
2010-12-13, 22:33
I'm sorry, I got to this place as I was trying to find a specific information, in which was discussed here. From the thread title I assumed it was a general discussion, I apologise for the error in my part.

no worries mate I'm not trying to make you feel out of place I just thought it was funny thats all.

Arrowflash021
2010-12-14, 20:23
But anyway, will the downgrade work with any firmware, or only if I remain on 3.41?

I'm still on 3.41, but no jailbreak since I have nothing that can do the job.
Thats the most important answer I'm looking for, since I would love to use netflix stream again, and I don't have a PC, I go to the library for that.

paddyc1988
2010-12-14, 21:10
But anyway, will the downgrade work with any firmware, or only if I remain on 3.41?

I'm still on 3.41, but no jailbreak since I have nothing that can do the job.
Thats the most important answer I'm looking for, since I would love to use netflix stream again, and I don't have a PC, I go to the library for that.
The downgrade will work on 3.50 but not 3.55(the latest) I think netflix will work with 3.50,
but if you update from the ps3 then you will go to firmware 3.55 so you'll have to download the the update and install via usb

nodymoha
2010-12-15, 11:18
any idea to spoofing 3.55 ???

like ps3yes team

ps3yes team released 3.55 spoof

Rutelo
2010-12-15, 13:48
Hi, first of all wanted to say that my English is a little bad, my query looks like this, if someone could explain a link with a tutorial on how to downgrade the ps3 by using psfreedom 3.50 to 3.41.
Thank you very much
Greetings

paddyc1988
2010-12-15, 16:28
any idea to spoofing 3.55 ???

like ps3yes team

ps3yes team released 3.55 spoof

There is no need to spoof 3.55 it will give you no advantage

Hi, first of all wanted to say that my English is a little bad, my query looks like this, if someone could explain a link with a tutorial on how to downgrade the ps3 by using psfreedom 3.50 to 3.41.
Thank you very much
Greetings
This is the best tutorial so far but you have to look at this first
http://talk.maemo.org/showpost.php?p=893763&postcount=790
This is the tutorial
http://talk.maemo.org/showpost.php?p=893844&postcount=793

mandong
2010-12-16, 11:49
There is no need to spoof 3.55 it will give you no advantage


It does give you an advantage if you have a 6 yrl old and a 7 yr old playing with the PS3. It will prevent them from accidentally updating to 3.55.

nodymoha
2010-12-19, 13:49
Why The THREAD is Dead .!.!.

Any Idea About Spoofing to 3.55

__________________________

how can i use open source payload on psfreedom ?

I DON'T LIKE WATING

finalfantasyx
2010-12-20, 07:24
All it does is stop someone accidentally updating your PS3

Read more: http://www.ps3hax.net/2010/12/all-boards-pl3hermes-4b-with-3-55-spoof/#ixzz18dO4p0PN

rafael.mfr83
2010-12-20, 13:47
Hi all, I've an stock N900 (2.6.28-omap1) and a PS3 on firm 3.50 (CECH-2004A DYN-001 Slim 120gb) and would like to downgrade it to 3.41 with modded PUP, just to be able to play backups.

So, after play backups for a few months, can I upgrade back to 3.50 (3.55) and then connect to PSN for online playing games?

*3.55 is currently the newer firmware and there is no method to spoof it using 3.50 (DNS and Logan5). If there is please tell us.

bonkel
2010-12-21, 17:52
so here it is
1. download the attached file.
2. extract it and do not bother reading the readme file.
3. uninstall any psfreedom(0.6 or other) from your n900.
4. plug in your USB cable, choose Mass storage mode and copy the 3 files in the zip file to the root of mass storage.
5. go to app manager and download rootsh
6. unplug USB cable
7. launch x terminal and type
sudo gainroot
cd MyDocs
sh psfreedom-enable-maemo.sh
8. plug in USB cable and connect to ps3
9. remove power cord, reconnect it and press power and immediately eject

here u r
insmod: error inserting 'psfreedom.ko: -1 invalid modle forma


so it does not work with power kernel 46, what can i do?

Kamikaze
2010-12-22, 23:44
I'm trying to install PSFreedom on my old N900 which can no longer connect to the internet through wifi or 3g for my brother as part of his xmas present. I downloaded the .deb file on my computer and transferred it over but it would not install in App Manager as it said it had missing dependencies (alphathemefix and mceledpattern). I downloaded the .deb for these two dependencies but it would not let me install them as it said incompatible application package. Does anyone have any idea how I can get around this to install it please?

nodymoha
2010-12-24, 22:24
Any News About 3.55 Spoofing??

kylepsp
2010-12-24, 22:30
There's no need for 3.55 spoofing, the only benefit is the update message stops coming up, just disable your internet if its really that bad

lightningroood
2010-12-25, 21:01
Hi, is there anyway to downgrade with a n810 or n800 device?

rafael.mfr83
2010-12-25, 22:40
Hi, is there anyway to downgrade with a n810 or n800 device?

hey lightning just follow ip4u and xatetb instruction on page 80. It works smooth, just downgraded 3.50 to 3.41 my ps3 cech-2004a using my nokia n900.

after that, use psfreedom to jailbreak the console.

CaptainClaw
2010-12-26, 00:01
Couldn't downgrade with my n800, I'm getting the same error as bonkel and I'm not using power kernel.

lightningroood
2010-12-26, 04:53
hey lightning just follow ip4u and xatetb instruction on page 80. It works smooth, just downgraded 3.50 to 3.41 my ps3 cech-2004a using my nokia n900.

after that, use psfreedom to jailbreak the console.

Hi, thanks for your reply. I tried the package provided by lp4u from the last post on page 79. However, it seems that it's not compatible with my N800. I got some error message when I run the psfreedom-enable script as such:

line 8: initctl: not found
insmod: cannot insert 'psfreedom.ko': invalid module format (-1): Exec format error.

What should i do now?

culofino
2010-12-27, 08:39
hi,its new http://www.ps3-hacks.com/2010/12/24/ps3-downgrade-with-nokia-n800-n810-n900/

lightningroood
2010-12-27, 09:03
hi,its new http://www.ps3-hacks.com/2010/12/24/ps3-downgrade-with-nokia-n800-n810-n900/

Hi, that's where I found the post on page 79. Their source is right here if you look down at the middle of the page. They say it will work on N800 and N810. That's misleading:(

mega
2010-12-28, 16:58
@MohammadAG

Master Key found
(http://psjailbreak.co.cc/ti-84-ti-89-pl3-and-psfreedom-ps3-jailbreak-updated)

boxkillor
2010-12-29, 13:08
@MohammadAG

Master Key found
(http://psjailbreak.co.cc/ti-84-ti-89-pl3-and-psfreedom-ps3-jailbreak-updated)

yeah nice, so whats then possible with that? maybe getting a cfw or somekind of hack to make all move games (or 3.5+ games) workable without problems ?

XaTeTb
2011-01-03, 20:53
GT5, NFS:HP and some other games workable now!
see here for decrypted eboot.bin
http://psx-scene.com/forums/f187/eboot-bin-repository-74327/

iceduck
2011-01-03, 21:45
Hey guys, I know GT5 is now working on 3.41. But I couldn't define which payload to use.
I tried with the stock psfreedom (both hermes and PL3). None of them is working.
Does anyone have an idea?
Which backup manager do you use? I tried with Both multiman and Gaia.

Thx

rafael.mfr83
2011-01-04, 00:14
Hey guys, I know GT5 is now working on 3.41. But I couldn't define which payload to use.
I tried with the stock psfreedom (both hermes and PL3). None of them is working.
Does anyone have an idea?
Which backup manager do you use? I tried with Both multiman and Gaia.

Thx

Hi all, I'm just following this thread, already did the downgrade from 3.50 to 3.41 using instructions on previous pages. Right now I'm using PSFreedom 0.6 downloaded from extra-devel to Jailbreak the PS3 by Nokia N900.

So, I would like to know how can I change the payload used by PSFreedom 0.6? As stock one isn't working (mentioned above by iceduke) with GT5.

Stock PSFreedom uses PL3 and Hermes v4b right? Do they have 3.55 spoof?

Maybe some other user also has the same doubt.

Thanks in advance!!

mandong
2011-01-04, 07:23
Hi all, I'm just following this thread, already did the downgrade from 3.50 to 3.41 using instructions on previous pages. Right now I'm using PSFreedom 0.6 downloaded from extra-devel to Jailbreak the PS3 by Nokia N900.

So, I would like to know how can I change the payload used by PSFreedom 0.6? As stock one isn't working (mentioned above by iceduke) with GT5.

Stock PSFreedom uses PL3 and Hermes v4b right? Do they have 3.55 spoof?

Maybe some other user also has the same doubt.

Thanks in advance!!

rafael, I don't think you need to change the payload. What you need to do is use the decrypted eboot.bin (and rebuilt for 3.41) for the game to work. search in google. ;)

sykesvr6
2011-01-04, 09:32
i tried nfs hp didnt work wanted to update ps3 to 3,50 think we need spoof for n900

Turkishflavor
2011-01-04, 09:35
just wait a while... the PS3 is now completly hacked, the root key has been found :D

nodymoha
2011-01-04, 10:16
Now You Can Play GranTurismo5 And NeedForSpeed:HP3

Please Give Us Spoofing For 3.55

paddyc1988
2011-01-04, 12:20
the 3.50 spoof should work just fine

rafael.mfr83
2011-01-04, 12:40
rafael, I don't think you need to change the payload. What you need to do is use the decrypted eboot.bin (and rebuilt for 3.41) for the game to work. search in google. ;)

hi mandong, thanks for ur reply. I know that using the modded eboot.bin the game should works fine. By the way, the question I made it was just for save as knowledge by myself (and for everyone).

jinnn_1989
2011-01-04, 15:17
the 3.50 spoof should work just fine

can you tell me howw to use the spoof and play gt5. i am newbie. i have cracked my ps3 but i dont know how to edit EBOOT file and wht to do. please also tell me that i have need for speed hot pursuit game for ps3 on my pc but is it iso file so how do i use it on my ps3 or where do i put the files on ps3?....may be i will be getting my hdd out of my ps3 connecting it to my pc and thn copying the files on it. plz help me fast urgent

mandong
2011-01-04, 15:24
hi mandong, thanks for ur reply. I know that using the modded eboot.bin the game should works fine. By the way, the question I made it was just for save as knowledge by myself (and for everyone).
oh okay. I thought you said yours was not working using the stock psfreedom.

I'm using psfreedom 0.6, hermes payload, multiMAN combination. I can also confirm that GT5 plays in my 60GB fat PS3 without any problem.

mandong
2011-01-04, 17:01
Hey guys, I know GT5 is now working on 3.41. But I couldn't define which payload to use.
I tried with the stock psfreedom (both hermes and PL3). None of them is working.
Does anyone have an idea?
Which backup manager do you use? I tried with Both multiman and Gaia.

Thx

hi iceduck, did you use the eboot.bin from the link that XaTeTb provided?

maurus
2011-01-04, 20:33
I have the payloads with 3.55 spoofing "for all dongles" BUT its for psgroove; the extension of this files are ".hex" somebody knows to trasnform in a ".bin" to use in nokia n900???

paddyc1988
2011-01-05, 16:28
I have the payloads with 3.55 spoofing "for all dongles" BUT its for psgroove; the extension of this files are ".hex" somebody knows to trasnform in a ".bin" to use in nokia n900???

Again why do you want a 3.55 spoof, the 3.50 spoof should allow you to do whatever you want.
If you really want the 3.55 spoof try a payload thats already been compiled for android.

maurus
2011-01-05, 18:25
Again why do you want a 3.55 spoof, the 3.50 spoof should allow you to do whatever you want.
If you really want the 3.55 spoof try a payload thats already been compiled for android.

thax
and for response ur question...
to play all the new games (that works in 3.50 GT5, RDR undead nightmare and others) is necessary modify the "eboot's" some people have a lot of troubles to run that games and to improve the compatibility the use of a new payload (hermes v4b+spoof 3.55 or PL3+spoof 3.55) is indispensable to make proves, always its better works with the most update tools, nobody can prove right now if the spoofing in 3.55 have influence in the new games, like a "spoof 3.50" was in Assassin's Creed Brotherhood or others... that is the reason...

sykesvr6
2011-01-05, 21:19
can you spoof 3.50 with n900

sykesvr6
2011-01-05, 21:34
can i add spoof to the psfreedom app on my phone

paddyc1988
2011-01-05, 21:41
@ maurus
Thats true but I dont think we will see a 3.55 spoof for the n900 until it is needed for playing something.


can you spoof 3.50 with n900
yes (search the thread)

Tiptronic
2011-01-05, 21:52
kakaroto.homelinux.net has something for the 3.55

sykesvr6
2011-01-05, 21:59
@ maurus
Thats true but I dont think we will see a 3.55 spoof for the n900 until it is needed for playing something.



yes (search the thread)

do you have need for speed and gt5 working

paddyc1988
2011-01-05, 22:58
do you have need for speed and gt5 working

I have only tested gt5 which worked just fine.

alexystems
2011-01-05, 23:42
Please can some one help me ,
i have downgrade my ps3 with my N900
but now i am stuck in factory mode
how do i return to normal mode,
thanks

sykesvr6
2011-01-05, 23:52
I have only tested gt5 which worked just fine.

where did you put the psn350payload.bin file its in documents in file manger but when i type in x terminal it can't open

rafael.mfr83
2011-01-06, 02:02
Please can some one help me ,
i have downgrade my ps3 with my N900
but now i am stuck in factory mode
how do i return to normal mode,
thanks

Just follow instructions on page 80

To turn off the Service mode you need copy to any blank usb pendrive formated in fat32 file Lv2diag.self from FILE 2 folder (from this archive http://www.sendspace.com/file/qlfoyi) and insert in right usb port of PS3. Turn ps3 on and then off.

mandong
2011-01-06, 05:31
where did you put the psn350payload.bin file its in documents in file manger but when i type in x terminal it can't open

You don't need the 3.50 spoof to play GT5 or NFS-HP, just the regular psfreedom payload. Get the respective eboot.bin's from HERE (http://talk.maemo.org/showpost.php?p=910926&postcount=847) (decrypted) and overwrite the ones in PS3_GAME/USRDIR folder.

In psfreedom 0.6 use the hermes payload. I'm using multiMAN and haven't tried other backup managers but I think it doesn't matter what backup manager you are using.

sykesvr6
2011-01-06, 07:09
i have tried nfs-hp and multiman but i get error think it ends in 800**814 its usa version might try euro1 same with splatterhouse iv got gt5 on disc so dont need gt5

sykesvr6
2011-01-06, 07:11
and i have change the eboots

mandong
2011-01-06, 07:19
i have tried nfs-hp and multiman but i get error think it ends in 800**814 its usa version might try euro1 same with splatterhouse iv got gt5 on disc so dont need gt5

are you getting the error after running NFS-HP or after running multiman?

sykesvr6
2011-01-06, 07:58
as soon as i try loading game mutiman works

KPAH
2011-01-06, 13:41
You don't need the 3.50 spoof to play GT5 or NFS-HP, just the regular psfreedom payload. Get the respective eboot.bin's from HERE (http://talk.maemo.org/showpost.php?p=910926&postcount=847) (decrypted) and overwrite the ones in PS3_GAME/USRDIR folder.
.

And if you read what you linked here, it says:
"Gran Turismo 5 ver1.00
PAYLOAD: some user here report to me that GT5 works better with PL3 3.55 than it does with V4B 3.55 (http://psx-scene.com/forums/f187/eboot-bin-repository-74327/)"

In my case,
NFS:HP has a eboot.bin for 3.41 and thus works without spoofing.

However, GT5 asks for a system update and exits if you decline.
So we need 3.50 spoofing.

Probably it's enough to just download this (http://www.ps3-hacks.com/file/200) unpack and replace the files in /opt/psfreedom/payloads/ on your N900

Could someone try that out? Busy with NFS right now.:)

sykesvr6
2011-01-06, 18:03
error 80028F14 with nfs-hp same with splatterhouse

KPAH
2011-01-06, 18:30
error 80028F14 with nfs-hp same with splatterhouse

that's payload error.
try using hermes in psfreedom

are you sure you do everything right?
boot ps3 in hermes jb, then go to backupman2, seect the game, wait for return to xmb and only then press on the gamefolder in the menu?

sykesvr6
2011-01-06, 18:35
i am using hermes psfreedom n900 app

sykesvr6
2011-01-06, 18:40
And if you read what you linked here, it says:
"Gran Turismo 5 ver1.00
PAYLOAD: some user here report to me that GT5 works better with PL3 3.55 than it does with V4B 3.55 (http://psx-scene.com/forums/f187/eboot-bin-repository-74327/)"

In my case,
NFS:HP has a eboot.bin for 3.41 and thus works without spoofing.

However, GT5 asks for a system update and exits if you decline.
So we need 3.50 spoofing.

Probably it's enough to just download this (http://www.ps3-hacks.com/file/200) unpack and replace the files in /opt/psfreedom/payloads/ on your N900

Could someone try that out? Busy with NFS right now.:)

i have used the files from the link

sykesvr6
2011-01-06, 18:41
using multiman

sykesvr6
2011-01-06, 18:43
all my other games work just nfs and splatterhouse

mandong
2011-01-06, 18:53
And if you read what you linked here, it says:
"Gran Turismo 5 ver1.00
PAYLOAD: some user here report to me that GT5 works better with PL3 3.55 than it does with V4B 3.55 (http://psx-scene.com/forums/f187/eboot-bin-repository-74327/)"

In my case,
NFS:HP has a eboot.bin for 3.41 and thus works without spoofing.

However, GT5 asks for a system update and exits if you decline.
So we need 3.50 spoofing.

Probably it's enough to just download this (http://www.ps3-hacks.com/file/200) unpack and replace the files in /opt/psfreedom/payloads/ on your N900

Could someone try that out? Busy with NFS right now.:)

That's hermes 3.55 spoofing and it just says "better". it doesn't say V4B 3.55 doesn't work. And I'll say it AGAIN, I'm using the regular hermes payload in psfreedom 0.6. No spoofing, plain psfreedom 0.6 hermes payload used in 3.41 fat 60GB PS3. I can post a video if you don't believe me.

Here's the eboot.bin I used : GT5 (http://www.zshare.net/download/84700584b242e7bd/)

Before running GT5 make sure there's no game data and of course do not choose "OK" when it offers to install the game update.

amjad489
2011-01-07, 10:40
Works Perfectly with
PSFREEDOM 0.6
Stock payload Hermes
Multiman

KPAH
2011-01-07, 14:29
Before running GT5 make sure there's no game data and of course do not choose "OK" when it offers to install the game update.

Argh,ok, now I got it working. You were right.:)
You don't have to patch anything in Multiman, as it requires a BD disk which is not an option (my bd drive is long dead).
Multiman just patches the PARAM.SFO file so the game doesn't require 3.50 no more. It prompts about this patching when starting the game, no additional actions required.

sykesvr6
2011-01-07, 15:31
has anyone got nfs hp working with PSFREEDOM 0.6 multiman

amjad489
2011-01-07, 15:44
Does anyone tried to run Fuel PS3...

nodymoha
2011-01-07, 17:16
GT5 Work 80% for me.

it hanging before start the race on "Time Trial" Mode

and "GT Mode" work perfectly 100%

sykesvr6
2011-01-07, 17:58
Works Perfectly with
PSFREEDOM 0.6
Stock payload Hermes
Multiman

can you tell me when you patch with multiman does anything change on screen when i press R1 to patch its as if multiman just scans hardrive and just puts me back to top of my games list as if i had just started it again i dont think its patching i have tried nfs hp,family game night 3 and splatterhouse none work i have changed eboots

KPAH
2011-01-07, 22:06
has anyone got nfs hp working with PSFREEDOM 0.6 multiman

try hermes modules and backup manager 2, not multiman.
nfs works for me 100%

gt5 launch is more complicated. get into multiman, press R1 then R1 again when the text about disk appears
Then select GT5 and press X. Press OK if it prompts to patch PARAM.SFO. Answer NO when asked to launch game without exiting to XMB.
In my case, GT5 is 50/50. Hangs quite often on boot.

sykesvr6
2011-01-08, 00:23
not bothered about gt5 got that on disc got 2 ps3's

sykesvr6
2011-01-08, 00:36
same error 80028F14 with backup manager 2

KPAH
2011-01-08, 03:40
same error 80028F14 with backup manager 2

Are you sure the eboot.bin you copy over is in the specific game folder (BLES-00949 for NFS) ?
//dev_hdd0/game/LAUN12345/GAMEZ/BLES-00949/PS3_GAME/USRDIR/EBOOT.BIN

I think you just tried too much.
Delete the game from PS3 menu and hardrive.
Copy over a fresh unmodified backup of NFS.
Copy over the eboot.bin. Make sure it is the eboot.bin in the nfs
(BLES-00949) folder!
Start Backupman2. Press X on the NFS title.
In the XMB, click of PS3game... thing.

Works for me.

amjad489
2011-01-08, 16:59
can you tell me when you patch with multiman does anything change on screen when i press R1 to patch its as if multiman just scans hardrive and just puts me back to top of my games list as if i had just started it again i dont think its patching i have tried nfs hp,family game night 3 and splatterhouse none work i have changed eboots
Dont use patch mode, just run the game from multiman latest version it works.
do one thing start from scratch
download the required eboot replace it in the NFS HP
JB your PS3 through Hermes
copy the game through gaia manager
open Multiman(latest Version)
start game- no need to pressR1(start normally)

Mine works without disc....

sykesvr6
2011-01-08, 23:44
Dont use patch mode, just run the game from multiman latest version it works.
do one thing start from scratch
download the required eboot replace it in the NFS HP
JB your PS3 through Hermes
copy the game through gaia manager
open Multiman(latest Version)
start game- no need to pressR1(start normally)

Mine works without disc....

did you boot it from ps3 hdd or ex hdd

kotor22
2011-01-09, 01:53
Hello everyone, I've got an n800, and I've been trying to run GT5 using many managers. I don't think there are as many payloads for the n800 as there are for n900. ( I tried using them but I get an insmod error.) any help at all would be appreciated, thanks!

badaman
2011-01-10, 13:23
That's hermes 3.55 spoofing and it just says "better". it doesn't say V4B 3.55 doesn't work. And I'll say it AGAIN, I'm using the regular hermes payload in psfreedom 0.6. No spoofing, plain psfreedom 0.6 hermes payload used in 3.41 fat 60GB PS3. I can post a video if you don't believe me.

Here's the eboot.bin I used : GT5 (http://www.zshare.net/download/84700584b242e7bd/)

Before running GT5 make sure there's no game data and of course do not choose "OK" when it offers to install the game update.

Been away from the scene for a bit an would like to play both GT5 and NFS. Could somebody show me a guide how to replace the files downloaded from the link into the N900?

Thanks in advance

amjad489
2011-01-10, 14:28
did you boot it from ps3 hdd or ex hdd

From PS3 HDD(int)

sykesvr6
2011-01-10, 15:37
Are you sure the eboot.bin you copy over is in the specific game folder (BLES-00949 for NFS) ?
//dev_hdd0/game/LAUN12345/GAMEZ/BLES-00949/PS3_GAME/USRDIR/EBOOT.BIN

I think you just tried too much.
Delete the game from PS3 menu and hardrive.
Copy over a fresh unmodified backup of NFS.
Copy over the eboot.bin. Make sure it is the eboot.bin in the nfs
(BLES-00949) folder!
Start Backupman2. Press X on the NFS title.
In the XMB, click of PS3game... thing.

Works for me.
Done what you said works fine thank you

sykesvr6
2011-01-10, 15:39
you dont know how to get splatterhouse working do you

sykesvr6
2011-01-10, 16:46
From PS3 HDD(int)

works off ext hdd thanks

paddyc1988
2011-01-10, 19:02
you dont know how to get splatterhouse working do you

use the modified eboot. which can be found a psx-scene

sykesvr6
2011-01-10, 19:15
use the modified eboot. which can be found a psx-scene

i have tried usa splatterhouse and changed eboot and it didnt work guna try eur one do you know if you boot from int hdd or ext hdd

badaman
2011-01-10, 19:24
I have tried to download the latest gui version of psfreedom but keep getting multiple errors. Do i need to update my maemo software?

badaman
2011-01-10, 20:13
I just tried to download open remote play and it started downloading straight away so don't want to update if not needed as i have not updated this phone since early last year. Any ideas?

paddyc1988
2011-01-10, 20:54
i have tried usa splatterhouse and changed eboot and it didnt work guna try eur one do you know if you boot from int hdd or ext hdd

Look it up here http://www.psjcl.com/gamelist-S#

sykesvr6
2011-01-10, 21:23
Look it up here http://www.psjcl.com/gamelist-S#

cheers why didnt i i think of that

badaman
2011-01-10, 21:48
cool so now i have installed the latest psfreedom.

I have not played my PS3 for months and want to play GT5 in the least complicated way. I have the following:
1)N900
2)Psfreedom 0.6 ( the latest)
3)Backup of GT5 on external ready to transfer to internal

Any ideas?

Thanks in advance

DACHIGGA
2011-01-11, 07:33
GT5 works great for me.

I just put in the new eboot and modified param.sfo. then ran pl3fix.

Ran just fine, no extra settings needed in open manager and gaia manager.

Using PL3 BTW.

badaman
2011-01-11, 09:41
black screen!
Thanks for all your input guys.

mandong
2011-01-11, 15:45
black screen!
Thanks for all your input guys.

badaman, before transferring the game to your internal drive download the eboot.bin file from the link I gave in my earlier post then copy it into PS3_GAME/USRDIR folder. Just overwrite the one that's already there.

Use multiman backup manager and load the game. First time, it will ask you if you want to patch PARAM.SFO, just select YES and you should be able to play GT5.

badaman
2011-01-11, 19:05
badaman, before transferring the game to your internal drive download the eboot.bin file from the link I gave in my earlier post then copy it into PS3_GAME/USRDIR folder. Just overwrite the one that's already there.

Use multiman backup manager and load the game. First time, it will ask you if you want to patch PARAM.SFO, just select YES and you should be able to play GT5.

Thanks for the replay mandog. I think I did that bar one thing.

1) Transferred via FTP using blackbox

2) Once copied I overwrote the EBOOT bin with the USA version from PSX scene

3) Used multiman to boot game from manager. Answered yes to patch the game

4) Black screen!!?

I was using hermes and not PL3. I also transferred the EBOOT after FTping the folder. Could this be my problem?

Cheers

badaman
2011-01-11, 19:22
Okay I have got a bit further now. I used PL3 and i managed to get to the install screen and now its frozen. Any ideas?

badaman
2011-01-11, 19:58
Its all good now..... i thinki!

mandong
2011-01-11, 20:26
Its all good now..... i thinki!

you mean you got it working?

if not, just do everything all over again making sure there's no game data before running the game with the modded eboot.bin on multiman.

mandong
2011-01-11, 20:28
Okay I have got a bit further now. I used PL3 and i managed to get to the install screen and now its frozen. Any ideas?

I use hermes payload but if PL3 works for you then why not? :)

badaman
2011-01-12, 09:06
Everything is working fine now thanks mandong. Am i okay to login into PSN with the current hermes I am using?

badaman
2011-01-12, 09:30
It has frozen again, after trying to play and install the first arcade track :(
I have corrupted game data from a previous failed install of GT5, could this be causing me problems?

nodymoha
2011-01-14, 12:11
How to downgrade from CFW 3.55 to 3.41 ???!

Please Tell me How >

MastaG
2011-01-14, 23:14
I also want to downgrade using my N900, but I'm having a hard time getting my 60GB Fat with 3.55 in service mode.
I'v got the latest PSFreedom from extras-devel.
Connect my N900 to the right USB-port on my PS3 (there are four on the front and I choose the one that's closest to the blu-ray drive).
On my N900 I start PSFreedom, select JIG-mode and start PL3 Jailbreak.
The led turns red, now I completely turn off my PS3 with power switch on the back.
Then I turn on the PS3 with the power switch on the back and I press the power-button quickly followed by the eject-button.
Nothing happens, the led will stay red and the N900 will prompt for mass-storage or pc-suite mode when the PS3 starts.
Then the PS3 enters the main-menu on the dashboard...
No service mode on the fat ps3?

dattadude
2011-01-17, 18:31
Hey ny idea hw to get mindjack to work?!!!!

Ive tried om, gaia n even multi man with hermes4b. . . even on mem patch n even if gia manager edits the param sfo no luk.

Ny luk?

Thks in advance!

WereCatf
2011-01-20, 22:24
I s'spose PSFreedom is kind of useless from now on. I just installed custom firmware 3.55 on my PS3, Gaia 2.02, and am happily playing my backups and can access PSN :)

Tiptronic
2011-01-20, 23:54
I s'spose PSFreedom is kind of useless from now on. I just installed custom firmware 3.55 on my PS3, Gaia 2.02, and am happily playing my backups and can access PSN :)

Did you need N900 to install custom firmware 3.55?

WereCatf
2011-01-20, 23:56
Did you need N900 to install custom firmware 3.55?

No, I didn't.

psycho89
2011-01-25, 12:18
No, I didn't.

hi there :D
do you mind if you gave me a link to the guide of how did u install the 3.55 CFW? i'd appreciate it, ive been busy with exams cldnt keep up with updates, thank u

WereCatf
2011-01-25, 12:24
hi there :D
do you mind if you gave me a link to the guide of how did u install the 3.55 CFW? i'd appreciate it, ive been busy with exams cldnt keep up with updates, thank u

http://psx-scene.com/forums/f187/%5Bcfw-tutorials%5D-kmeaw-wutangrza-update-4-new-tutorials-now-available-come-here-noobs-d-76406/

I am using Kmeaw's one. Note that I do NOT take any responsibility for anything you do to your PS3, and you should really know what you're doing because you can brick it otherwise!

psycho89
2011-01-25, 12:27
http://psx-scene.com/forums/f187/%5Bcfw-tutorials%5D-kmeaw-wutangrza-update-4-new-tutorials-now-available-come-here-noobs-d-76406/

I am using Kmeaw's one. Note that I do NOT take any responsibility for anything you do to your PS3, and you should really know what you're doing because you can brick it otherwise!

thank you for your concern, i'll check if my device is compatible first for sure then i'll look around for bugs and errors from ppl already done it then ill try doing it, wont be nice to brick 500$.. thank you again :)

magicalkobra
2011-03-26, 22:20
hi i m running power kernel 42. i get an error message when using psfreedom "insmod: can't read '/opt/psfreedom/modules/psfreedom.ko': No such file or directory"
I went to this path and i found out that there were folders for defalt kernel and power 46.
so should i just rename power46 to power42 or do i need different files?

magicalkobra
2011-03-27, 22:31
can anyone help me here plz?

Sub-Negro
2011-04-21, 15:51
Can I play imported PS2 games with this? And yes I have a 60GB fat model.

zairs
2011-05-01, 19:49
Trying to do my first jailbreak on a 60gb ps3 running 3.30, that doesn't have a bluray drive connected.
I'm using psfreedom on my n900 which should just be plug and play all i have to do is

turn ps3 off at switch
turn on ps3
press power then eject within 0.2 sec
and it should install hermes 3.41 or pl3 depending on my selection
but it just has a green light on the ps3 and nothing else happens, the light is red on the phone and the mass storage screen comes up. I left it over 10mins and nothing happens

DUDEXYZ
2011-06-30, 16:38
sorry. a NOOB question. what are we going to achieve by jailbreaking a ps3????

Necrofenser
2011-08-22, 12:54
Can someone explain me how to use this app?
I extracted Psfreedom-n900-1.1.tar.gz.tar to MyDocs folder, and when i start Jailbreak mode but it gives me error that it can't find psfreedom.ko file.

jakiman
2011-08-23, 23:33
Umm. You do not need to jailbreak PS3's anymore.

http://www.ps3crunch.net/installing-kmeaw-custom-firmware-with-backup-manager-support.html

meShell
2012-01-07, 13:39
@MohammadAG:
I have only a litte problem, as I have running the power46-wl1 kernel (bleeding edge one, not the normal power46) and PSFreedom can't find the module, which I think is dynamicly linked after clicking pl3-/hermes-button. I tried to add a folder power46-wl1 in each module, but I think it is hardcoded omap1 / power46.

Any chance to get the sources or to make it support different modulefolders?

I am still unsing 3.41 on my PS3, and most time I need PSfreedom for updating my showtime builds.

Edit:
OK, I can run insmod on my own for loding one of the power46 modules and your tool recognizes it and is using it without problems, so there is a workaround available for me.

Hurrian
2012-01-07, 13:59
I am still unsing 3.41 on my PS3, and most time I need PSfreedom for updating my showtime builds.


Dongles are obsolete, grab Kmeaw or Rebug, flag the console with Advanced QA, then you can freely downgrade and upgrade up to 3.55.

If I were you, I'd get a hardware flasher right now.

ZogG
2012-01-07, 14:34
Dongles are obsolete, grab Kmeaw or Rebug, flag the console with Advanced QA, then you can freely downgrade and upgrade up to 3.55.

If I were you, I'd get a hardware flasher right now.

tell it to true blue =)

meShell
2012-01-07, 18:53
Maybe in furure I will upgrade to higher FW,
but for now I feel very comfortable with 3.41 and flashing always means a little risk to brick, and until now I never needed a higher FW. And showtime runs without any dongle, so as I told I only need it for installing a new showtime version. I try to prevent upgrading until I really need to for now ;)

Of course I understand that it is even more comfortable that I wouldn't need any dongle anymore.

vittoriob4
2012-03-02, 01:16
@meShell
Just wondering how did you workaround your kernel version in order to make psfreedom to work. I'm currently using power49 and as you mentioned MAG's psfreedom has links harcoded, so even renaming folders wouldnt help much.I would appreciate your feedback :) thanx

@MohammadAG:
I have only a litte problem, as I have running the power46-wl1 kernel (bleeding edge one, not the normal power46) and PSFreedom can't find the module, which I think is dynamicly linked after clicking pl3-/hermes-button. I tried to add a folder power46-wl1 in each module, but I think it is hardcoded omap1 / power46.

Any chance to get the sources or to make it support different modulefolders?

I am still unsing 3.41 on my PS3, and most time I need PSfreedom for updating my showtime builds.

Edit:
OK, I can run insmod on my own for loding one of the power46 modules and your tool recognizes it and is using it without problems, so there is a workaround available for me.

vittoriob4
2012-03-02, 02:23
IF anybody out there knows how to solve this issue I would much appreciate it..I just spent last 4 hrs looking for solution on here as well as google. No luck...Thing is I'm running power49 and I didnt use psfreedom for almost a year now. I tried to use it today and I'm getting"insmod: can't read '/opt/psfreedom/modules/psfreedom.ko"

Dont want to mess around with downgrading kernel just to have psfreedom to work again. I know there are much better ways to jailbreak ps3 these days, but I would like to stick to psfreedom. Thanx

vittoriob4
2012-03-02, 12:24
can anybody help me ?

meShell
2012-03-12, 14:56
@meShell
Just wondering how did you workaround your kernel version in order to make psfreedom to work. I'm currently using power49 and as you mentioned MAG's psfreedom has links harcoded, so even renaming folders wouldnt help much.I would appreciate your feedback :) thanx

There are only modules for

omap
power46



I can load it manually and then select the payload in the gui and let it run.

To load a module manually you need to be root and call:


sudo gainroot
modprobe -r g_nokia
modprobe -r g_file_storage
insmod /opt/psfreedom/modules/pl3/power46/psfreedom.ko

Theak
2012-07-15, 02:36
i have a problem, when i choose jailbreak mode it says "insmod can't read '/optpsfreedom/modules/psfreedom.ko' no such file or directory, i am on kernel power 46... any help plzzzz?

wook_sf
2012-08-06, 12:07
i am getting error "insmod: can't read '/opt/psfreedom/modules/psfreedom.ko': No such file or directory
even i placed osfreedom.ko there manually and there's dirs hermes and pl3...damn
what's wrong? :D
//edit fixed by manual loading of module before running PSFreedom :)
MAG, thanks for this wonderful thingy, looking forward to use it tomorrow :)