View Full Version : Help pair Alltel KRZR with 770!
07-12-2007, 06:23 PM
I already added all the settings to the 770 but whenever I try accessing the internet. It says "Could not connect to phone"
Anyone know what the problem is?
07-12-2007, 06:41 PM
is the bluetooth turned on, on both devices and the phone in "discoverable mode"? did you pair correctly and set the other device as a trusted device in the process?
07-12-2007, 09:09 PM
Well I'm not sure how to enable it on the 770, i thought it was automatically enabled... They do PAIR correctly because my KRZR asks for PIN and then says "Pairing Complete" The bluetooth symbol blinks on my phone until I try accessing the internet on the N770, then it stays stable and my N770 says "Connection to phone failed. Try again? MotoKrzr" then it starts blinking again.
07-14-2007, 01:39 AM
From what I've read the 770 can never go into discoverable mode. This is fine since my Krzr (Verizon K1M) can do it. For the verizon K1M you do the following:
Go to the "Settings & Tools" tab
Hit option 3 "Bluetooth"
Hit option 2 "Discovery Mode"
Select on, then hit OK
The phone should be in discovery mode for the next 3 minutes.
To pair it with the 770, just add it on the 770. Your 770 should be able to "see" the Krzr. The k1m will prompt you for a code on your phone (its on the 770). Then it'll ask if you want to pair a few times. Just click ok or yes each time. Its fairly straightfwd.
Try deleting the pairing and starting from scratch. It may even be a problem with the connection settings to the internet and not the actual bluetooth settings.
07-16-2007, 11:48 AM
Do you have a data plan?
07-16-2007, 02:07 PM
Yes i have a data plan... What settings should I check?
vBulletin® v3.8.7, Copyright ©2000-2013, vBulletin Solutions, Inc.