N9 May be Bricked???

[sukhraj]

I had a few problems with my N9 so decided to wipe everything and start again I downloaded the latest PR 1.2 for my correct phone version...used the updater and all i can get is

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\system32>cd C:\Program Files\Nokia\Flasher

C:\Program Files\Nokia\Flasher>flasher -f -F DFL61_HARMATTAN_30.2012.07-1_PR_LEG
ACY_005-OEM1-958_ARM.bin
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_30.2012.07-1_PR_005
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 84 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3337 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 2643 kB/s]
[f] rootfs [pending 0 % 0 / 1163498 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
mmc: sfdisk returned status 1
mmc: Could not remove mount directory /tmp/sudmmcZN47lz/mnt: No such file or dir
ectory
[Pipe 4] Finishing in error state with status 1
========================================

ERROR: Failed to flash images

C:\Program Files\Nokia\Flasher>



The phone wont boot or anything????:( Can anyone help??

[abill_uk]

hehehe here we go again only this time with the N9 instead hahaha

I just love it when people think they have bricked there devices lol.

Sorry mate i cant help you on this one cos i gave the N9 i had back it was awful even worse than the N900 was on pr1.2 but for sure you aint bricked it so stop panic ok, someone will; come on here and help you lol.

[rainisto]

try flashing with linux or another usb port/cable/machine or redownload the bin. just use search as this has been answered many times before.

If anything else fails then nokia care for warranty replacement.

[sukhraj]

Im the first to jump on people for not trying obvious solutions and for not searching but i CANT NOT find anything to resolve this hence asking for help tried diff ports and .bin files...

[abill_uk]

OK open power search it is the top on the right side of this and type in "flashing the nokia n9" you will get a comprehensive guide plus a load of help on flashing the N9.

http://talk.maemo.org/showthread.php?t=82693

http://talk.maemo.org/showthread.php?t=80874

ETC ETC

[thedead1440]

have you enabled logging on your phone?

[rainisto]

flashing fails quite often in windows, if your failing also in linux/ubuntu then your flash memory might be broken and you need warranty replacement.

the error message suggests windows usb transfer sync errors or broken flash memory.

[sukhraj]

flashing fails quite often in windows, if your failing also in linux/ubuntu then your flash memory might be broken and you need warranty replacement.

the error message suggests windows usb transfer sync errors or broken flash memory.

Finally someone who helping...As I said before im not a ****** I do know theres a sticky telling you HOW to flash...hence why im having problems with flashing!

[ibrakalifa]

try another pc, and try xp or w7 32bit, me myself always failed when use 64bit, but work flawlessly on 32bit, sorry for my English

[sukhraj]

well tried flashing via ubuntu and still no joy I think its bricked unless someone else can enlighten me?

[sukhraj]

hehehe here we go again only this time with the N9 instead hahaha

I just love it when people think they have bricked there devices lol.

Sorry mate i cant help you on this one cos i gave the N9 i had back it was awful even worse than the N900 was on pr1.2 but for sure you aint bricked it so stop panic ok, someone will; come on here and help you lol.

really unhelpful really. If I havnt bricked it you tell me a method I can get it to boot up?

[sukhraj]

I take it im screwed lol

[MINKIN2]

pm'd you back

[Hellano]

Hi, i have the same problem.
Did you fixed it?


here is the log:



flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

USB device found at bus 36, device address 3.
Device serial number is
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 95 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[_] cmt-mcusw [finishing 25 % 6050 / 6050 kB 3451 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1967 kB/s]
[_] rootfs [init 0 % 32768 / 1170282 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3451 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1967 kB/s]
[f] rootfs [init 0 % 32768 / 1170282 kB NA ]
Fetching error list:
========================================
Update content failed to verify against cert: SW certificate not updated
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
mmc: sfdisk returned status 1
mmc: Could not exec 'tune2fs -L rootfs /tmp/sudmmcYo3FAQ/internal0p2'
mmc: Could not remove mount directory /tmp/sudmmcYo3FAQ/mnt: No such file or directory
[Pipe 5] Finishing in error state with status 1
========================================

ERROR: Failed to flash images

[rainisto]

Hi, i have the same problem.
Did you fixed it?

[/CODE]

that looks like corrupted flash image, so you can try redownloading.

Ofcourse you can be unlucky and have faulty flash memory, and in that case just go to nokia care for replacement.

[Hellano]

Yep...

I redownloaded 2 times, same error..
And my net speed isn't too low. Firmware download at ~350KBps..
Not tried a firmware of another country.
Should I try a new one?


So, how this happened:
I did nothing and it came up. About two days the battery discharged. When I put the charger, the mobile continuously restarted on nokia logo. I tried flasher once, and came up the warranty warning screen, with a triangle . Tried again, no success. My phone hasn't inception. Just OEM.

http://img405.imageshack.us/img405/2922/capturadetela20120717s1.png


So, I think I may have problems contacting nokia care, won't I?

[rainisto]

Yep...
I redownloaded 2 times, same error..
And my net speed isn't too low. Firmware download at ~350KBps..
Not tried a firmware of another country.
Should I try a new one?

Maybe you should paste md5sum of the 001 bin image in here, so we can check if its corrupted or not.


So, how this happened:
I did nothing and it came up.

what do you mean by it? If you got the warranty screen without ever using the flasher command, then its most likely hw failure and you should take the device to nokia care. But if you got the error by trying to flash something, then.... :-/


About two days the battery discharged. When I put the charger, the mobile continuously restarted on nokia logo. I tried flasher once, and came up the warranty warning screen, with a triangle . Tried again, no success. My phone hasn't inception. Just OEM.

So, I think I may have problems contacting nokia care, won't I?

When the device is on low battery rebootloop, one of the worst things that you can do is to reflash it, (you should just switched the charging mode on so it wouldnt reboot, and wait overnight for it to charge fully).

[Hellano]

Ok, sorry my english, and if I wasn't clear.

What happened:

1. The device discharged.
2. I connected to charger. It started a "rebootloop". I didn't even know what it was. Unplugged.
3. Tried to charge via usb computer. Same rebootloop. So, I let it overnight, and did not charged.
4. So, what did I? flasher -f -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958_ARM.bin
5. Flasher said "low battery, 0%. Waiting to be 11%."
6. Got rootfs error, and once I rebooted, warranty screen.

md5sum:


Mac: Hellano$ md5 DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958_ARM.bin
MD5 (DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958_ARM.bin) = 53fcefc0033875661c19160e16999b3e



Mac: Hellano$ md5 DFL61_HARMATTAN_40.2012.13-7.LTA_EMMC_LTA.bin MD5 (DFL61_HARMATTAN_40.2012.13-7.LTA_EMMC_LTA.bin) = dcca5322f1888b9436f22fe8f94238bc


By the way.. How to check if this md5 is ok?


Thanks the help.

[rainisto]

Thanks the help.
md5sum of 001 seems to be ok. What happens if you do following command (everything in one line):

sudo flasher -f -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958_ARM.bin -F DFL61_HARMATTAN_40.2012.13-7.LTA_EMMC_LTA.bin -R -Owait-charging

(that should 1st charge the device and then flash it, so running the command can take some time, hour or so)

[Hellano]

Mac: Hellano$ sudo flasher -f -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958_ARM.bin -F DFL61_HARMATTAN_40.2012.13-7.LTA_EMMC_LTA.bin -R -Owait-charging
flasher 3.12.1 (Oct 5 2011) Harmattan
flasher: invalid option -- O
Usage: flasher [OPTIONS]
Options:
-V, --version Print application version
--quiet Quiet flashing, do not show progress table
-F, --fiasco=ARG Location of FIASCO image
-a, --ape-algo=ARG Location of APE algorithm image (FIASCO or plain)
-k, --kernel=ARG Location of kernel image
-L, --moslo=ARG Location of moslo image
-n, --initfs=ARG Location of initfs image
-r, --rootfs=ARG Location of root filesystem image
--cmt-2nd=ARG Location of CMT FIASCO 2nd image
--cmt-algo=ARG Location of CMT FIASCO algorithm image
--cmt-mcusw=ARG Location of CMT FIASCO MCUSW image
-i, --read-device-id Print out the device type
-f, --flash Load and flash all supplied images
-l, --load Only load all supplied images
-b, --boot[=ARG] Boot the kernel with optional cmdline
-R, --reboot Reboot the device (after flashing)
-c, --cold-flash "Cold flash" the device
--enable-rd-mode Enable R&D mode on the device
--disable-rd-mode Disable R&D mode on the device
--set-rd-flags[=ARG] Set R&D mode flags on the device
--clear-rd-flags[=ARG] Clear R&D mode flags on the device
--query-rd-mode Query the device R&D mode status and flags
--flash-only=ARG Flash only certain components
-M, --flash-only-mmc Shortcut for flash only MMC
-U, --usb-device=ARG Specify USB device to use, <bus>[:<device-address>]
or s:<usb-serial-number> or S:<serial-number>
-v, --trace-level[=ARG] Set or increment trace level
--erase-user-data[=ARG] Erase user data, ARG is erase method (e.g. secure)
Erases eMMC and swap, resets device lock
--erase-mmc[=ARG] Erase eMMC, ARG is erase method (e.g. secure)
--suppress-warranty-warning Suppress warranty warning


It seems has no "-Owait-charging" option for flasher.

If I patch an open-kernel (link), (http://maemo.cloud-7.de/HARM/N9/1.3/openmode-kernel/zImage-2.6.32.54-dfl61-20121301) should be easier to reinstall original firmware later? Or I would be waste of time?

[m4r0v3r]

The flasher automatically charges the phone and them flashes it

[rainisto]

Oh sorry, I didn't remember that public flasher doesn't have that option. So you should try flash without that option :)

[Hellano]

Mac: Hellano$ sudo flasher -f -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958_ARM.bin -F DFL61_HARMATTAN_40.2012.13-7.LTA_EMMC_LTA.bin -R
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

USB device found at bus 36, device address 3.
Device serial number is
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image tar skipped
Image config skipped

Battery level 89 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[_] cmt-mcusw [finishing 25 % 6050 / 6050 kB 3527 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1917 kB/s]
[_] rootfs [init 0 % 32768 / 1170282 kB NA ]
[ ] mmc [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3527 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1917 kB/s]
[f] rootfs [init 0 % 32768 / 1170282 kB NA ]
[-] mmc [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
Update content failed to verify against cert: SW certificate not updated
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
mmc: sfdisk returned status 1
mmc: Could not exec 'tune2fs -L rootfs /tmp/sudmmctZ930p/internal0p2'
mmc: Could not remove mount directory /tmp/sudmmctZ930p/mnt: No such file or directory
[Pipe 5] Finishing in error state with status 1
========================================

ERROR: Failed to flash images



another option?

I'm almost giving up.
I avoided nokia care until now because it lasts about 30days to give me a feedback. ¬¬
If I have no success until sunday, I will try nokia care..