Re: [Announce] Fceu-gui (including fceu) for N900
 

was just a thought of mine, not that important:D

Re: [Announce] Fceu-gui (including fceu) for N900
 

ROMPATH2 can not be saved……

Re: [Announce] Fceu-gui (including fceu) for N900
 

Just tried it, it works fine with me. The new rompath2 is stored as expected (an not even the need to restart fceu-gui).
You did use the save button after setting the new rompath2?

If the problem still persists, maybe some error is shown. See if starting
from the terminal gives you any errors when setting rompath2 and saving it.

Re: [Announce] Fceu-gui (including fceu) for N900
 

not found??it does exist

Re: [Announce] Fceu-gui (including fceu) for N900
 

The exact message is "not found"? Please write down the litteral messages, else it is hard to see where it goes wrong.

What is your rompath2 location? Then I can create the same path for testing.

Re: [Announce] Fceu-gui (including fceu) for N900
 

I just forgot root, ok it ran, but critical rom2_path 'notset' not found.

While I set roms 1 as /media/mmc1/games/nes

roms 2 as /media/mmc1/games/nsf, and it calls me to use save botton to save. but it has no save botton, except I enter from fceu-gui>config. and even I use config to set rompath2, then close, save, back to main memu, nothing changed, no roms was found. Only the rompath1 is useable

Re: [Announce] Fceu-gui (including fceu) for N900
 

The save button from the config menu has to be used...

Now that I am testing with the external SD card, I seem to encounter the same issue. I will take a closer look later this day.
Thanks for noticing.

Edit: fixed the error in version 0.0.1-6

Re: [Announce] Fceu-gui (including fceu) for N900
 

Bingo it does, that's great.

May I hope ade if you can make the emumaster like N9 runs well on N900?

Re: [Announce] Fceu-gui (including fceu) for N900
 

I thought of this too. Ade, wouldn't you be interested in applying one of your great UIs to Emumaster? The one it has now isn't very usable as it is on fremantle...

Re: [Announce] Fceu-gui (including fceu) for N900
 

At the moment I am working on another (gui) project :)

I haven't looked at Emumaster yet. All I heard is that is uses QML, which I am not very familiar with at the moment. Is the graphical interface separate from the emulator part? If integrated, it means adapting the current one (= likely a big time investment for me :() .

In due time I may download it (just to have a look at it), but for now I have other priorities for sure.