Re: RTL8187 (r8187 driver)
So does anyone have this driver? I'm not looking for super stability.. I just want to be able to perform deauth attacks and fake ap attacks...
|
Re: RTL8187 (r8187 driver)
Quote:
I tried modprobe r8187 nd modprobe rtl8187 and got module not found. |
Re: RTL8187 (r8187 driver)
in theory the driver comes integrate since power kernel 47 and if you try to connect a rtl8187 wifi card to n900 through HEN if you look at kernel output in HEN console it recognise it!! but then if you go to terminal and prove ifconfig or airmon-ng dont recognise it so it is kinda confuse because if "ifconfig" dont recognise it means the kernel dont it too.
This thing break my mind for a long time, because i was very interested in connect external antennas to N900 and i prove everything but get nowhere. I think only pali or someone a that highest level of skill has the power and knowledge to make this work. |
Re: RTL8187 (r8187 driver)
1 Attachment(s)
OK, for future visitors of this thread I will post the instructions that made it work for me :)
First I followed all the instructions of pinoverclock and they were almost flawless, the only thing he forgot was you also needed to insmod the ieee80211-rtl.ko right before the r8187.ko If you, just like me, are not very enthusiastic about compiling, I will give you my compiled modules which, even though compiled some for kernel power 47 and some for kernel power 46, should work on all power kernels (maybe even stock, who knows, I will not try myself). I use kernel power 46 modified to inject from the internal thing and it works fine :D Sorry for the wierd triple extension, blame the forum 488kb limit ;) Good luck, you just extract the file and insmod all the modules in the following order: ieee80211_crypt-rtl.ko ieee80211_crypt_wep-rtl.ko ieee80211_crypt_tkip-rtl.ko ieee80211_crypt_ccmp-rtl.ko ieee80211-rtl.ko r8187.ko Happy Hunting! EDIT: I forgot remember to rmmod the wl12xx and mac80211 modules before you insmod the next :) |
Re: RTL8187 (r8187 driver)
This is great!
|
Re: RTL8187 (r8187 driver)
Hy Linuxeventually
The question would be whether you could explain step by step installation procedure? (the RTL8187 (r8187 driver)) Many Regards AndreW Quote:
|
Re: RTL8187 (r8187 driver)
How to load rtl kernel module manualy?
or what should i do with kp52? H-e-n console says [87295.076629] usb 1-1: Product: RTL8187_Wireless_LAN_Adapte [87295.076660] usb 1-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [87295.076690] usb 1-1: SerialNumber: 00C0CA2053D9 [87295.076721] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [87295.076812] hub 1-0:1.0: port 1 enable change, status 00000503 lsusb shows realtek too,but iwconfig shows only standart wlan |
Re: RTL8187 (r8187 driver)
When I do with drivers from post in this thread
insmod /path.to.your.modules/ieee8011_crypt-rtl.ko insmod /path.to.your.modules/ieee8011_crypt_wep-rtl.ko insmod /path.to.your.modules/ieee8011_crypt_tkip-rtl.ko insmod /path.to.your.modules/ieee8011_crypt_ccmp-rtl.ko insmod /path.to.your.modules/r8187.ko i got error "-1 Unknown symbol in module" plz help :( Found how to solve that at aircrack site,but i can't get it compiled |
Re: RTL8187 (r8187 driver)
Doesn't have "kernel-power-headers" in my backtrack ,So how to compile Stack and Drv?
PS I believe one day i'll have success with it |
All times are GMT. The time now is 19:38. |
vBulletin® Version 3.8.8