Nokia N9 Failed to flash
tried to flash Nokia n9 64gb with correspondent firmaware that is on the back of the simtray, when I get At the end this
C:\N9>flasher -i flasher 3.12.1 (Oct 6 2011) Harmattan WARNING: This tool is intended for professional use only. Using it may result in permanently damaging your device or losing the warranty. Ping attempt 1 (250 ms) Server application: 1.7.2 Found product RM-696 rev. 1501 Server implements softupd protocol version 1.8 Success also got this while flashed Suitable USB interface (bootloader/phonet) not found, waiting... Found device RM-696, hardware revision 1501 NOLO version 2.3.6 Version of 'sw-release': DFL61_HARMATTAN_30.2012.07-1_PR_009 Sending ape-algo image (7103 kB)... 100% (7103 of 7103 kB, avg. 20709 kB/s) Suitable USB interface (phonet) not found, waiting... Ping attempt 1 (250 ms) Server application: 1.7.2 Found product RM-696 rev. 1501 Server implements softupd protocol version 1.8 Image SW version DFL61_HARMATTAN_40.2012.21-3.280.04.1_PR_280 Image moslo not present Image mmc not present Image tar skipped Image config skipped Battery level 59 %, continuing. image [state progress transfer flash speed] --------------------------------------------------------------------- [x] cert-sw [finished 100 % 1 / 1 kB NA ] [x] cmt-2nd [finished 100 % 95 / 95 kB NA ] [_] cmt-algo [init 100 % 789 / 789 kB NA ] [ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ] [x] xloader [finished 100 % 23 / 23 kB NA ] [x] secondary [finished 100 % 94 / 94 kB NA ] [x] kernel [finished 100 % 2714 / 2714 kB 1310 kB/s] [_] rootfs [writing 3 % 41984 / 1170774 kB 8179 kB/s] ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error image [state progress transfer flash speed] --------------------------------------------------------------------- [x] cert-sw [finished 100 % 1 / 1 kB NA ] [x] cmt-2nd [finished 100 % 95 / 95 kB NA ] [f] cmt-algo [init 0 % 789 / 789 kB NA ] [-] cmt-mcusw [pending 0 % 0 / 0 kB NA ] [x] xloader [finished 100 % 23 / 23 kB NA ] [x] secondary [finished 100 % 94 / 94 kB NA ] [x] kernel [finished 100 % 2714 / 2714 kB 1310 kB/s] [x] rootfs [finished 100 % 1170774 / 1170774 kB 8780 kB/s] Fetching error list: ======================================== bb5_rdc_cert_read failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed Timeout while waiting for the HWBREAK Could not reboot into cold bootmode [Pipe 6] Finishing in error state with status 1 ======================================== ERROR: Failed to flash images any insights or help, I know is 2015 but just like my N9 and cant jus leave it |
Re: Nokia N9 Failed to flash
i didnt have an idea why it doesnt work but why you didnt intend to install 40.xxx with version 001?
Seems you are in the old Software version, so you can here update with 001. the 280 is limiting the psoibilitys for the future. |
Re: Nokia N9 Failed to flash
Check this thread:
http://talk.maemo.org/showthread.php?t=82693 but is does not look good :( check downloaded firmware for correct md5sum could be broken download or broken eMMC btw. you try flashing with variant 280 while your N9 has 009 not a problem but just ... |
Re: Nokia N9 Failed to flash
Quote:
|
Re: Nokia N9 Failed to flash
Quote:
|
Re: Nokia N9 Failed to flash
1 Attachment(s)
Dont see here 1.3 version, anyway it is already showing v40 280 :(
|
Re: Nokia N9 Failed to flash
Quote:
|
Re: Nokia N9 Failed to flash
Quote:
Guess you also have a broken eMMC :( You may try zeroize, also cold boot '-c', but I do not have much hope |
Re: Nokia N9 Failed to flash
Quote:
what is cold boot -c |
Re: Nokia N9 Failed to flash
Test With This Code:
Code:
flasher --erase-mmc -F firmware.bin -f -R |
All times are GMT. The time now is 12:19. |
vBulletin® Version 3.8.8