Dead N9?
 

Hi all,

I'm new here but having spent an entire evening trying to fix an N9, I really need your help!

I received this N9 dead from the owner (it was cheap) but the screen showed the Nokia logo when plugged into power so I thought it should be relatively straight forward to unbrick. Anyway, without having seen the device on, I was unsure exactly which firmware to flash, and looking on the sim tray I found:

040-096926

L1A11135

P1-1 v3.0

This didn't seem to match the files on Navifirm so I took a guess and went with the UK 16Gb black rom (I am from the UK and this is where I acquired the unit). The device responded well to being flashed in Ubuntu using Flasher (using commands flasher -f -F main.bin). however, it would not boot after this, and stopped showing the Nokia logo anymore. After a while I thought I would try the generic black 16Gb rom, but now flasher would throw up errors , a typical example is here:

root@lubuntu:/home/lubuntu/Desktop# flasher -f -F main.bin
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 002, device address 021.
Device identifier: xxxxxxxxxxxxxxx (SN: N/A)
Found device RM-696, hardware revision 1201
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_001
Sending ape-algo image (7103 kB)...
100% (7103 of 7103 kB, avg. 13351 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 002, device address 022.
Device identifier: 004402134209083 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1201
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3.280.04.1_PR_280
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 100 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[_] cmt-mcusw [init 33 % 2048 / 6050 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1772 kB/s]
[_] rootfs [writing 0 % 26624 / 1170774 kB 859 kB/s]
Raw data transfer failed: No such device

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[f] cmt-mcusw [init 0 % 2048 / 6050 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1772 kB/s]
[f] rootfs [writing 0 % 26624 / 1170774 kB 859 kB/s]
Fetching error list:
ERROR: Failed to flash images

Trying su flasher -i brings up this:

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 002, device address 015.
Device identifier: 004402134209083 (SN: N/A)
Found device RM-696, hardware revision 1201
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_001
Successroot@lubuntu:/home/lubuntu/Desktop#

I also tried flashing the emmc along with the main rom as listed here: http://talk.maemo.org/showthread.php?t=82693

but to no avail. Cold boot also seems to not do anything.

Does anyone have any suggestions? I'm all out of ideas. Any help would be so greatly appreciated, and sorry for the long post but just wanted to make sure you knew exactly what I'd done before anyone says RTFM!

Thanks,

Mark

Re: Dead N9?
 

Try searching again for 96926

Re: Dead N9?
 

Search for 96926 on Navifirm? Is there a quick search function that you know of?

Re: Dead N9?
 

right I've exported the entire directory into a text file and I still can't seem to find 96926 in Navifirm, am I missing something?

Re: Dead N9?
 

Can you give the Name of the person who sold this to you? As it has prototype imei, which are not allowed to be sold. So the person can be fired from work for selling old prototype hardware.

PS. If you go to Nokia care with the device and they notice the imei, your in trouble :-)

Re: Dead N9?
 

That would explain a lot then, thanks. The person who sold it to me is themselves someone who bought this from another, who as you suggest may well be a naughty disgruntled Nokia employee!

Hmm, right well I'm in a jam as I have bought this item and I can't get it working. Any advice on what software is best to get this thing running again? If it's an old prototype then I'll happily keep it as long as it works - I have a friend who works at Nokia (no it wasn't him, he's off in California working on WP8 devices!), and I know how much trouble employees can get in for selling prototypes, so I wouldn't want to get anyone fired.

Re: Dead N9?
 

Anyone help me with this? If I can get it working I'll just keep it, I had no idea I would end up with a prototype

Re: Dead N9?
 

waspy, seems like old geeks here are jealous about proto as they are not able to get it.
instead of helping you up, they're messing with imei....
better edit first post and remove / censure imei in there (just in case)
however, seems like there's something wrong with your device and it looks like it can't flash root filesystem onto your phone.
maybe you can boot to meego CE, as i've seen you can flash kernel and meego is booting from mass memory, so, maybe you can see at least if it can't mount your phone as mass storage, then...it's dead...though

Re: Dead N9?
 

Thanks wook_sf, edited. I'm happy to swap my proto with a consumer, I just want a working Meego phone!

So can you give me some idea of what I should be looking to do? This is going to the edge of my experience here...

Re: Dead N9?
 

actually, you can just download any FW from Navifirm as long as the PR_Legacy is 280 or higher...from your output, pr_legacy 280 is installed so using pr_001 won't work...i'm not sure if it would work but you could try it...