maemo.org - Talk
Page 3 of 13 12 3 45 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Android (https://talk.maemo.org/forumdisplay.php?f=54)
-   -   [How To] Nitdroid-Installer: install GingerBread N12 UMay (https://talk.maemo.org/showthread.php?t=72365)

raaj13 2011-04-23 17:48
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
just a problem my internet is not working even after creating apn and selecting it.
Do you guys have internet working?

Armand360 2011-04-24 01:18
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
the download is taking quite a while, so is it possible to download the 137mb file myself and then put it in MyDocs and let the installation proceed from there on? what should be edited in the manifest file?

raaj13 2011-04-24 07:07
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
Quote:
Originally Posted by Armand360 (Post 994357)
the download is taking quite a while, so is it possible to download the 137mb file myself and then put it in MyDocs and let the installation proceed from there on? what should be edited in the manifest file?
you can try manual installation guide given on wiki

Armand360 2011-04-24 08:38
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
saw a few, but this seems to be a lot easier seeing that it's automated :P i'd like my nitdroid to be installed on my external memory card so if i were to install it manually after installing the 0.0.8 version (nitdroid installer), which manual installation should i use to install it on my memory card?

Fabry 2011-04-25 01:05
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
Quote:
Originally Posted by Armand360 (Post 994357)
the download is taking quite a while, so is it possible to download the 137mb file myself and then put it in MyDocs and let the installation proceed from there on? what should be edited in the manifest file?
Download the file yourself and put it in /home/user/MyDocs/.nitdroid/
I have never tried but I think nitroid installer will use it without redownload it

Fabry 2011-04-25 01:08
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
Quote:
Originally Posted by money541988 (Post 994070)
Failure............Bailing out
how to fix it????
Probably you have done some typing errors during manifest creation.

Check your manifest file, common errors are:
  • ofono047_ori1008.tar.bz2 instead of ofono047_oril008.tar.bz2
    It is ORIL (lower case) the right name
  • nitdroid-kernel-2.6.28-06_finall_armel.deb instead of nitdroid-kernel-2.6.28-06_final1_armel.deb
    It is FINAL1 and not FINALL

Fabry 2011-04-25 01:11
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
Quote:
Originally Posted by Garcel (Post 994003)
Thanks Fabry a fantastic work you got there. Forgive my noobness but what will happen if I try this while My nitdroid 0.0.9 is still currently installed? (installed in memory card) I don't want to run into a boot loop thanks
I suppose that simply you will loose your 0.0.9 installation that will be overwritten by 2.3.3 installation but I haven't personally tried

LaZyGolfer 2011-04-28 17:13
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
getting Failure, bailing out aswell... tried to copy the files in .nitdroid folder but stays the same over and over.

copy pasted the manifest text on page 1, checked for typo's but it perfectly the same... so don't know why it inst working.

in the log file it just stops after downloading the vostok file (dont even know why it's downloading when I have the file in the directory?)

*edit* k seems it works now, I guess when the server is lagged... things won't go smooth with the install, so best bet it try and try I guess.

maemouser1 2011-04-29 17:02
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
Hi can anyone help me please? I am getting the following error when trying to install this:
Code:
Formatting /dev/mmcblk1p2 (ext3) ...done
Mounting /dev/mmcblk1p2 ...done
Extracting N11_Vostok.tar.bz2 ...FAILURE. Bailing out.
I don't know what's wrong. When extracting the archive using bzip2 -d it works. Here is the output from the log file:

Code:
tar: system/bin/ln: Cannot create symlink to `toolbox': No such file or directory
system/bin/sgx_init_test
tar: system/bin/sgx_init_test: Cannot open: No such file or directory
system/bin/ping
tar: system/bin/ping: Cannot open: No such file or directory
system/bin/camtest
tar: system/bin/camtest: Cannot open: No such file or directory
system/bin/pvr2d_test
tar: system/bin/pvr2d_test: Cannot open: No such file or directory
system/bin/fsck_msdos
tar: system/bin/fsck_msdos: Cannot open: No such file or directory
system/bin/stop
tar: system/bin/stop: Cannot create symlink to `toolbox': No such file or directory
system/bin/setprop
tar: system/bin/setprop: Cannot create symlink to `toolbox': No such file or directory
ueventd.nokia.rc
tar: ueventd.nokia.rc: Cannot open: Read-only file system
ueventd.rc
tar: ueventd.rc: Cannot open: Read-only file system
usr/
tar: usr: Cannot mkdir: Read-only file system
usr/sbin/
tar: usr/sbin: Cannot mkdir: No such file or directory
usr/sbin/fbset
tar: usr/sbin/fbset: Cannot hard link to `bin/cp': No such file or directory
usr/sbin/chroot
tar: usr/sbin/chroot: Cannot open: No such file or directory
usr/sbin/nbd-client
tar: usr/sbin/nbd-client: Cannot hard link to `bin/cp': No such file or directory
usr/bin/
tar: usr/bin: Cannot mkdir: No such file or directory
usr/bin/which
tar: usr/bin/which: Cannot hard link to `bin/cp': No such file or directory
usr/bin/less
tar: usr/bin/less: Cannot hard link to `bin/cp': No such file or directory
usr/bin/pmap
tar: usr/bin/pmap: Cannot hard link to `bin/cp': No such file or directory
usr/bin/find
tar: usr/bin/find: Cannot hard link to `bin/cp': No such file or directory
usr/bin/readlink
tar: usr/bin/readlink: Cannot hard link to `bin/cp': No such file or directory
usr/bin/test
tar: usr/bin/test: Cannot hard link to `bin/cp': No such file or directory
usr/bin/dirname
tar: usr/bin/dirname: Cannot hard link to `bin/cp': No such file or directory
usr/bin/free
tar: usr/bin/free: Cannot hard link to `bin/cp': No such file or directory
usr/bin/md5sum
tar: usr/bin/md5sum: Cannot hard link to `bin/cp': No such file or directory
usr/bin/sort
tar: usr/bin/sort: Cannot hard link to `bin/cp': No such file or directory
usr/bin/bzip2
tar: usr/bin/bzip2: Cannot hard link to `bin/cp': No such file or directory
usr/bin/seq
tar: usr/bin/seq: Cannot hard link to `bin/cp': No such file or directory
usr/bin/yes
tar: usr/bin/yes: Cannot hard link to `bin/cp': No such file or directory
usr/bin/tee
tar: usr/bin/tee: Cannot hard link to `bin/cp': No such file or directory
usr/bin/[
tar: usr/bin/[: Cannot hard link to `bin/cp': No such file or directory
usr/bin/id
tar: usr/bin/id: Cannot hard link to `bin/cp': No such file or directory
usr/bin/head
tar: usr/bin/head: Cannot hard link to `bin/cp': No such file or directory
usr/bin/od
tar: usr/bin/od: Cannot hard link to `bin/cp': No such file or directory
usr/bin/basename
tar: usr/bin/basename: Cannot hard link to `bin/cp': No such file or directory
usr/bin/nohup
tar: usr/bin/nohup: Cannot hard link to `bin/cp': No such file or directory
usr/bin/tr
tar: usr/bin/tr: Cannot hard link to `bin/cp': No such file or directory
usr/bin/strings
tar: usr/bin/strings: Cannot hard link to `bin/cp': No such file or directory
usr/bin/unzip
tar: usr/bin/unzip: Cannot hard link to `bin/cp': No such file or directory
usr/bin/time
tar: usr/bin/time: Cannot hard link to `bin/cp': No such file or directory
usr/bin/unlzma
tar: usr/bin/unlzma: Cannot hard link to `bin/cp': No such file or directory
usr/bin/expr
tar: usr/bin/expr: Cannot hard link to `bin/cp': No such file or directory
usr/bin/install
tar: usr/bin/install: Cannot hard link to `bin/cp': No such file or directory
usr/bin/renice
tar: usr/bin/renice: Cannot hard link to `bin/cp': No such file or directory
usr/bin/bunzip2
tar: usr/bin/bunzip2: Cannot hard link to `bin/cp': No such file or directory
usr/bin/lzma
tar: usr/bin/lzma: Cannot hard link to `bin/cp': No such file or directory
usr/bin/du
tar: usr/bin/du: Cannot hard link to `bin/cp': No such file or directory
usr/bin/xargs
tar: usr/bin/xargs: Cannot hard link to `bin/cp': No such file or directory
usr/bin/bzcat
tar: usr/bin/bzcat: Cannot hard link to `bin/cp': No such file or directory
usr/bin/killall
tar: usr/bin/killall: Cannot hard link to `bin/cp': No such file or directory
usr/bin/[[
tar: usr/bin/[[: Cannot hard link to `bin/cp': No such file or directory
usr/bin/cut
tar: usr/bin/cut: Cannot hard link to `bin/cp': No such file or directory
usr/bin/lzcat
tar: usr/bin/lzcat: Cannot hard link to `bin/cp': No such file or directory
usr/bin/fuser
tar: usr/bin/fuser: Cannot hard link to `bin/cp': No such file or directory
usr/bin/env
tar: usr/bin/env: Cannot hard link to `bin/cp': No such file or directory
usr/bin/wc
tar: usr/bin/wc: Cannot hard link to `bin/cp': No such file or directory
usr/bin/split
tar: usr/bin/split: Cannot hard link to `bin/cp': No such file or directory
usr/bin/chrt
tar: usr/bin/chrt: Cannot hard link to `bin/cp': No such file or directory
usr/bin/realpath
tar: usr/bin/realpath: Cannot hard link to `bin/cp': No such file or directory
usr/bin/tail
tar: usr/bin/tail: Cannot hard link to `bin/cp': No such file or directory
tar: sdcard: Cannot unlink: Read-only file system
tar: sbin/killall5: Cannot unlink: Read-only file system
tar: sbin/poweroff: Cannot unlink: Read-only file system
tar: sbin/halt: Cannot unlink: Read-only file system
tar: sbin/ifup: Cannot unlink: Read-only file system
tar: sbin/init: Cannot unlink: Read-only file system
tar: sbin/hwclock: Cannot unlink: Read-only file system
tar: sbin/pivot_root: Cannot unlink: Read-only file system
tar: sbin/lsmod: Cannot unlink: Read-only file system
tar: sbin/swapoff: Cannot unlink: Read-only file system
tar: sbin/ifconfig: Cannot unlink: Read-only file system
tar: sbin/nameif: Cannot unlink: Read-only file system
tar: sbin/ifdown: Cannot unlink: Read-only file system
tar: sbin/getty: Cannot unlink: Read-only file system
tar: sbin/mkswap: Cannot unlink: Read-only file system
tar: sbin/route: Cannot unlink: Read-only file system
tar: sbin/reboot: Cannot unlink: Read-only file system
tar: sbin/swapon: Cannot unlink: Read-only file system
tar: sbin/modprobe: Cannot unlink: Read-only file system
tar: sbin/losetup: Cannot unlink: Read-only file system
tar: sbin/ueventd: Cannot unlink: Read-only file system
tar: sbin: Cannot utime: Read-only file system
tar: sbin: Cannot change ownership to uid 0, gid 0: Read-only file system
tar: sbin: Cannot change mode to rwxr-xr-x: Read-only file system
tar: Exiting with failure status due to previous errors
!!! ERROR:2 tar xv
*** ERROR - CLEANING UP THE CRAP
There are more similar errors. I don't get it. Is it permission or what? Why am I getting these errors?

sagor_sb37 2011-05-06 16:08
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
plz help me guys i m using android 2.2.1 ........but cant get rid of airplale mode............. plz help me to get red of air plane mood........


All times are GMT. The time now is 10:13.
Page 3 of 13 12 3 45 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8