maemo.org - Talk - Editing n900's rootfs.jffs2

maemo.org - Talk (https://talk.maemo.org/index.php)

- Development (https://talk.maemo.org/forumdisplay.php?f=13)

- - Editing n900's rootfs.jffs2 (https://talk.maemo.org/showthread.php?t=35554)

Editing n900 rootfs image

How to mount or edit rootfs.jffs2 file?
Already tried via nandsim and mtdram - no luck. I can't mount ubifs filesystem. Wiki entry have only information about jffs2 and not ubifs.

Re: Editing n900's rootfs.jffs2

Well in theory you need recent kernel that supports ubifs and recent mtd-utils and follow stuff here
http://www.linux-mtd.infradead.org/d...tml#L_usptools
http://www.linux-mtd.infradead.org/doc/ubifs.html

I was trying to mount it too but didn't manage yet. Was also thinking that easier might be to simply flash it to NAND in my beagleboard and mount it there. But there shouldn't be problem with mtdram, just create mtdram device, use ubi tools to create/attach ubi volume and 'flash' image to it.

Re: Editing n900's rootfs.jffs2

Here one solution to mount it:

Code:

# modprobe mtdblock



# modprobe ubi



# modprobe nandsim first_id_byte=0x20 second_id_byte=0xaa third_id_byte=0x00 fourth_id_byte=0x15



# cat /proc/mtd

dev:    size   erasesize  name

mtd0: 10000000 00020000 "NAND simulator partition 0"



# ls -la /dev/mtd*

brw-r--r-- 1 root root 31, 0 2009-12-01 18:50 /dev/mtd0

brw-rw---- 1 root disk 31, 0 2009-12-01 19:06 /dev/mtdblock0



# dd if=rootfs.jffs2 of=/dev/mtdblock0 bs=2048

74688+0 records in

74688+0 records out

152961024 bytes (153 MB) copied, 5.87334 s, 26.0 MB/s



# ubiattach /dev/ubi_ctrl -m 0

UBI device number 0, total 2048 LEBs (264241152 bytes, 252.0 MiB), available 0 LEBs (0 bytes), LEB size 129024 bytes (126.0 KiB)



# ls -la /dev/ubi*

crw-rw---- 1 root root 252,  0 2009-12-01 19:06 /dev/ubi0

crw-rw---- 1 root root 252,  1 2009-12-01 19:06 /dev/ubi0_0

crw-rw---- 1 root root  10, 58 2009-12-01 19:05 /dev/ubi_ctrl

# mount -t ubifs ubi0_0 /mnt/n900/



# ls -la /mnt/n900 | head

total 4

drwxr-xr-x 22 root root 1504 2009-10-30 14:36 .

drwxr-xr-x  9 root root 4096 2009-10-25 20:02 ..

drwxr-xr-x  2 root root 3920 2009-10-30 14:31 bin

drwxr-xr-x  2 root root  232 2009-10-30 14:48 boot

drwxr-xr-x  2 root root  160 2009-10-30 14:28 cdrom

drwxr-xr-x  3 root root 3808 2009-10-30 14:37 dev

drwxr-xr-x  2 root root  160 2009-10-30 14:28 .dev

drwxr-xr-x 72 root root 7488 2009-10-30 14:48 etc

drwxr-xr-x  2 root root  160 2009-10-30 14:28 floppy



#

To pack back into ubifs do following:

Code:

# mkfs.ubifs -m 2048 -e 129024 -c 2047 -r /mnt/n900/ rootfs_ubifs.jffs2



# cat > cfg.ini

[rootfs]

mode=ubi

image=rootfs_ubifs.jffs2

vol_id=0

vol_size=160MiB

vol_type=dynamic

vol_name=rootfs

vol_flags=autoresize

vol_alignment=1



# ubinize -o rootfs_new.jffs2 -p 128KiB -m 2048 -s 512 cfg.ini



# ./flasher-3.5 -f -R -r rootfs_new.jffs2

Doing this please be careful, it was working for me, but you must check all parameters according with dmesg after mounting volume. Untested with image bigger than original.
Somebody please test this and add to wiki.

Re: Editing n900's rootfs.jffs2

Quote:

This doesn't work for me, using the SDK VM.

Can anyone confirm the true filesystem type of the rootfs.jffs2 file, and possibly a working How To for mounting the image?

Re: Editing n900's rootfs.jffs2

Quote:

Originally Posted by x86 (Post 403015)

Here one solution to mount it:

I have suse 11.3 with kernel 2.6.34.7-0.3-desktop
i can't mount rootfs.jffs2
all commands works perfectly excepts when i run

Code:

modprobe nandsim first_id_byte=0x20 second_id_byte=0xaa third_id_byte=0x00 fourth_id_byte=0x15

the output is
[code]
crw------- 1 root root 90, 0 Oct 9 17:34 /dev/mtd0
crw------- 1 root root 90, 1 Oct 9 17:34 /dev/mtd0ro
brw-rw---- 1 root disk 31, 0 Oct 9 17:34 /dev/mtdblock0
[code]
Then i run

Code:

ubiattach /dev/ubi_ctrl -m 0

I get an error

Code:

ubiattach: error!: cannot attach mtd0

           error 30 (Read-only file system)

And of course, can't mount it

Re: Editing n900's rootfs.jffs2

What is your result to:

Code:

cat /proc/mtd

?

I suspect your mtd0 is taken

Re: Editing n900's rootfs.jffs2

cat /proc/mtd

Code:

dev:    size   erasesize  name

mtd0: 10000000 00020000 "NAND simulator partition 0"

Re: Editing n900's rootfs.jffs2

when using this command

Code:

dd if=rootfs.jffs2 of=/dev/mtdblock0 bs=2048

this is what i get in reply

Code:

dd if=rootfs.jffs2 of=/dev/mtdblock0 bs=2048

dd: opening `rootfs.jffs2': No such file or directory

many thanks ]

Re: Editing n900's rootfs.jffs2

put the full path to rootfs.jffs2

The above instructions only work for me on ubuntu 10.04 32bit.
In openSUSE don't work

Re: Editing n900's rootfs.jffs2

Technically, they should work on all OSs assuming there's MTD block support in the kernel (afaik ubuntu got that in 10.04)