WPA Enterprise
 

I would like to know if WPA Enterprise is supported on the N900? Attached goes the gnome network panel that is used as mock for this network I am talking about.

Also, is it possible for me to force certain functions of the phone just to connect when a certain wlan is found?

Re: WPA Enterprise
 

Yup, that WPA Enterprise authentication method is supported.

And also, yeah it is possible to have it connect to only specific WLAN's when in range.

Re: WPA Enterprise
 

I'm having trouble with my college WPA Enterprise.
They use WPA Enterprise, TKIP, PEAP MSCHAPv2, no certificate.

Is this a bug perhaps? IDK, but i thought I'd ask here first.:)

Re: WPA Enterprise
 

Mine works. Little different settings than in my computer.
Set no @domain in main settings. then in advanced manual username use the domain name. Certificates are automatic.
Good luck.

Re: WPA Enterprise
 

I thought that was supported, but I don't have a network of that type to check with.
Also, just because someone is going to ask, no, TTLS-PAP is not supported on Maemo (although I believe it works in Mer). Last official word I heard was "Maybe Maemo 6", and while on one hand it's darn annoying that they don't have it done yet, the huge jump in everything else from Maemo 4 to 5 gives me some sympathy for their priorities.

Re: WPA Enterprise
 

I got it now, just had to follow what Stargazer said :) Tnx man! (forgot about the advanced settings... )

Re: WPA Enterprise
 

have tried all the above. My corporate network is using a WPA Enterprise - PEAP -MSCHAPv2. I have tried everything but always get the error message "Authentication failed.. " everytime i try to connect. is there something else apart from the above i can do to troubleshoot.

Re: WPA Enterprise
 

Here is the solution: Please follow the steps EXACTLY as below:
1. Select New Connection
2. Enter Connection Name
3. Scan for available wi-fi network - select "No" if it is hidden network
4. Enter the exact SSID (if it is hidden then select Hidden checkbox)
5. Network mode: Infrastructure
6. Security method: WPA with EAP (this is what I selected for connecting to my office network)
7. EAP Type: PEAP
8. Select Certificate: None
9. EAP Method: EAP MSCHAPv2
these are most important steps:::
10. User name: ONLY ENTER User Name - no domain is required here
11. Password: enter valid password
12. Click Next and then click "Advanced"
13. Click "EAP" tab
14. Select "Use manual user name" checkbox
15. Enter "Manual user name" as username@domain --- very important.
16. Save
17. Finish

You are all SET. Setps 10 to 15 are very important.

Re: WPA Enterprise
 

it don't work for my.
look de log in the server (2008R2) and compare with a succed one,
the diferent is that AuthrnticationType is EAP isntead of PEAP and EAPType is missconfigured