maemo.org - Talk

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Maemo 5 / Fremantle (https://talk.maemo.org/forumdisplay.php?f=40)
-   -   [Announce] kernel-power stable v53 in Extras Testing (https://talk.maemo.org/showthread.php?t=94287)

pali 2014-12-10 17:14

[Announce] kernel-power stable v53 in Extras Testing
 
Finally kernel-power version v53 is now in Extras Testing!

Update (from old version):
Use Hildon Application Manager or via apt-get.

Installation:
From Hildon Application Manager install package: Linux kernel for power user
Or via apt-get package: kernel-power-flasher

Overclock support (optional):
From Hildon Application Manager install package: Linux kernel for power user (settings and overclock)
Or via apt-get package: kernel-power-settings

U-Boot support (optional):
From Hildon Application Manager install packages: U-Boot with kernel 2.6.28-omap1 and Linux kernel for power user (boot image for U-Boot)
Or via apt-get packages: u-boot-flasher and kernel-power-bootimg
Make sure you accept flashing U-Boot!

Packet injection wifi driver:
Kernel modules are already included and installed in /opt/packet-injection-modules/2.6.28.10-power53/
To load/unload it use shell script: http://atrey.karlin.mff.cuni.cz/~pal...t-injection.sh
Support for IBSS (Ad-Hoc) mode is now fixed.

BME replacement support:
This kernel has support for BME replacement (open source battery management). More info in this thread.

New USB host mode:
This kernel has support for new usb host mode package USB Mode version 1.0-4. More info in this thread.

Uninstallation:
Overclock support or Bootimg package can be uninstalled via Hildon Application Manager or via apt-get. Uninstalling kernel itself is possible only via menu entry "Nokia Kernel". NEVER UNINSTALL KERNEL POWER PACKAGES!!! IT CAN MAKE YOUR DEVICE UNBOOTABLE.

===

Changelog:

wl1251-maemo (0.3) unstable; urgency=low

* Include IBSS fixes patches

-- Pali Rohár <hidden> Fri, 09 May 2014 19:58:51 +0200

kernel-power-settings (0.18) fremantle; urgency=low

* start upstart script after mounting /home and /opt
* upstart kernel-modules file is service

-- Pali Rohár <hidden> Fri, 09 May 2014 17:58:06 +0200

kernel-power (1:2.6.28-10power53) fremantle; urgency=low

* Backport security fixes from upstream kernel for radio driver in patch radio-bcm2048-security.patch
* fix sign of value in bcm2048_##prop##_read()
* fix missing unlock on error in bcm2048_rds_fifo_receive()
* fix coccinelle warnings: Replace memcpy with struct assignment
* fix unneeded semicolon in bcm2048_fops_read()
* Fix dangling if statement in patch power-supply-no-verbose.diff
* Backport usb ids from upstream kernel for dm9601.ko and asix.ko drivers
* Add patch nokia-av_key.patch for immediately headset button press event as KEY_PROG1
* Remove shm_size=0x400000 from /etc/modprobe.d/bridgedriver because it is not needed
* Update patch overclock_smartreflex_900.diff to improve the stability on some rare devices
* Fix suspend to memory problems, generally only useful in offline mode
use /sys/power/state to enter (not used by Mameo5, just less broken now)
* advance system clock after resume using RTC time
* computer USB port now is able to be detected and charge after resume
* disable WARN_ON in getnstimeofday when timing system suspended

-- Pali Rohár <hidden> Sat, 10 May 2014 22:17:57 +0200

===

For questions about development, bugs, etc... write to thread
[Development] kernel-power on http://talk.maemo.org/showthread.php?t=78371
Here is also information how to compile kernel, send patches, ...

peterleinchen 2014-12-10 17:33

Re: [Announce] kernel-power stable v53 in Extras Testing
 
Thanks pali.

I am a bit ashamed as I am using this kernel already almost half a year (and did not give any feedback to you :().
But now: everything is fine. Never ran into any kind of problem.

pali 2014-12-10 17:35

Re: [Announce] kernel-power stable v53 in Extras Testing
 
I have not done any changes since May, so version in Extras-Devel & Testing should be same, just (re)compiled by Maemo infra.

reinob 2014-12-10 19:52

Re: [Announce] kernel-power stable v53 in Extras Testing
 
Thanks @pali

I can confirm that apt-get upgrade'ing from kp52 to kp53 works fine. Note that if you use U-boot and you want to keep it, you have to cancel when asked if OK to replace u-boot with kp53!!!

pichlo 2014-12-10 21:02

Re: [Announce] kernel-power stable v53 in Extras Testing
 
And I can confirm that an upgrade through FAM works just as well ;)
I had to reboot manually though to load the new kernel.

There is a new dependecy package, fiasco-image-update-ask. Why is it needed and why is it still needed after the reboot? I could not uninstall it, everything depends on it.

pali 2014-12-10 21:07

Re: [Announce] kernel-power stable v53 in Extras Testing
 
-flasher package depends on it. and that package cause user will be asked if some SW/script try to flash *other* kernel (non kernel-power) into nand. It is protection against removing u-boot or kernel-power.

acrux 2014-12-11 08:41

Re: [Announce] kernel-power stable v53 in Extras Testing
 
Quote:

Originally Posted by pali (Post 1451471)
Update (from old version):
Use Hildon Application Manager or via apt-get.

Hmm, that does not seem to work...
Currently I'm at kp52 and Extras Testing is enabled.

HAM does not show any update available at all and after "apt-get update" "apt-get upgrade" says:
Code:

# apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages have been kept back:
  kernel-power kernel-power-flasher kernel-power-modules
The following packages will be upgraded:
  kernel-power-settings
1 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.
Need to get 10,8kB of archives.
After this operation, 0B of additional disk space will be used.
Do you want to continue (Y/n)?

So here I pressed "n", but what could be the reason for this situation?

pali 2014-12-11 09:50

Re: [Announce] kernel-power stable v53 in Extras Testing
 
broken dependences. try to use aptitude upgrade

branja 2014-12-11 10:16

Re: [Announce] kernel-power stable v53 in Extras Testing
 
Hi guys. Hope U can help me...

Updated to KP v53 via HAM. Worked like a charm. Restarted device...and it won't boot up. It vibrates, then the Nokia logo appears and than it shut itself off. I have removed battery and tried again, got the same results.
Even have tried to flash it but my computer didn't recognised it. It says "Suitable USB device not found, waiting.".
It looks like it strugles to establish connection to a PC or a charger cuz from time to time it vibrates and than yellow led shines until it happens over and over again. Battery is fully charged and usb port is in order. Don't know what to do, please help.

Edit:

I have succeeded in flashing it. Will install everything and try again.

reinob 2014-12-11 11:30

Re: [Announce] kernel-power stable v53 in Extras Testing
 
Quote:

Originally Posted by pali (Post 1451595)
broken dependences. try to use aptitude upgrade

it's probably just the fiasco-ask-fiasco :) so just doing "apt-get dist-upgrade" should do it.

Actually, I didn't even know we had aptitude in the repos :)


All times are GMT. The time now is 10:14.

vBulletin® Version 3.8.8