maemo.org - Talk - Need help!! N9 not flashing mmc!!

maemo.org - Talk (https://talk.maemo.org/index.php)

- MeeGo / Harmattan (https://talk.maemo.org/forumdisplay.php?f=45)

- - Need help!! N9 not flashing mmc!! (https://talk.maemo.org/showthread.php?t=100179)

Need help!! N9 not flashing mmc!!

I messed around a little with partitions, but now whenever I try to flash MMC I get this error:

Code:

[cmptutr@computer n9folder]$ sudo flasher -f -F D4A3D2AC_DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_009-OEM1-958_ARM.bin -F nomaps.bin --flash-only=mmc

flasher 3.12.1 (Oct  5 2011) Harmattan

WARNING: This tool is intended for professional use only. Using it may result

in permanently damaging your device or losing the warranty.



USB device found at bus 001, device address 021.

Device identifier: 357923040985998 (SN: N/A)

Raw data transfer EP found at EP2.

Ping attempt 1 (250 ms)

Server application: 1.7.2

Found product RM-696 rev. 1507

Server implements softupd protocol version 1.8

Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_009

Image cmt-2nd skipped

Image cmt-algo skipped

Image cmt-mcusw skipped

Image xloader skipped

Image secondary skipped

Image kernel skipped

Image moslo skipped

Image rootfs skipped

Image tar skipped

Image config skipped



Battery level 74 %, continuing.



    image        [state    progress         transfer     flash speed]

---------------------------------------------------------------------

[x] cert-sw      [finished   100 %       1 /       1 kB      NA     ]

[_] mmc          [init        25 %   32768 /  261587 kB      NA     ]

It gets stuck at 25%. The EMMC image used to work before I messed up the partitions (when installing nemo). How do I fix it?

Re: Need help!! N9 not flashing mmc!!

Quote:

Originally Posted by cmptutr (Post 1540605)

How do I fix it?

By cold-flashing?

Re: Need help!! N9 not flashing mmc!!

Can I have a link for how to cold flash N9? All searches show only cold flashing N900..

Re: Need help!! N9 not flashing mmc!!

Nevermind my previous post, found out how. But, I get an error:

Code:

[cmptutr@computer n9folder]$ sudo flasher -c -f -F D4A3D2AC_DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_009-OEM1-958_ARM.bin -R

[sudo] password for cmptutr: 

flasher 3.12.1 (Oct  5 2011) Harmattan

WARNING: This tool is intended for professional use only. Using it may result

in permanently damaging your device or losing the warranty.



Using 1st image to detect HW

Suitable USB interface (bootrom) not found, waiting...

USB device found at bus 002, device address 009.

Device identifier: (null) (SN: N/A)

Waiting for ASIC id...

Got 69 bytes.

ASIC ID:

05 01 05 01 36 30 07 07  13 02 01 00 12 15 01 6c 

15 fd 17 51 bc 3f 6f 61  7b 85 ea 01 16 06 47 67 

c8 6a ab 14 15 01 12 dd  2f 66 d4 55 fe 19 2c 62 

b9 b8 e2 65 0a fc 1d 9f  3f 90 15 09 01 13 bf 3e 

ef 15 52 e7 03 

HW variant: HS

Found matching 1st (916)

Sending 1st image (26496 bytes)... done.

Sending HWID query... Received 11 bytes from 1st

usb_bulk_read: Input/output error

Got HWID: RM-696:1507

USB device found at bus 002, device address 009.

Device identifier: (null) (SN: N/A)

Waiting for ASIC id...

usb_bulk_read: Input/output error

ERROR: Cold flashing failed.

Re: Need help!! N9 not flashing mmc!!

How about?

Code:

flasher -F main.bin -F emmc.bin --erase-user-data=secure --erase-mmc=secure --no-preserve -f -R

Re: Need help!! N9 not flashing mmc!!

Quote:

Originally Posted by aspergerguy (Post 1540612)

How about?

Code:

flasher -F mail.bin -F emmc.bin --erase-user-data=secure --erase-mmc=secure --no-preserve -f -R

erase should not be important
but the no-preserve is (after partition layout changes)

Re: Need help!! N9 not flashing mmc!!

I tried no preserve but it did not fix partition problems. When I boot up with the ubiboot kernel (so i can export partitions over USB) it shows three partitions, but when I boot to Harmattan and run /sbin/sfdisk it shows four partitions.

Re: Need help!! N9 not flashing mmc!!

Erm, would you mind posting your commands and results?

I have the feeling you try to reach flashing eMMC without providing the second "-F emmc.bin"...

Re: Need help!! N9 not flashing mmc!!

Ok, new developments. I'm stuck in a bootloop and when I even try flashing normally, it fails:

Code:

[cmptutr@computer n9folder]$ sudo flasher -f -F D4A3D2AC_DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_009-OEM1-958_ARM.bin

flasher 3.12.1 (Oct  5 2011) Harmattan

WARNING: This tool is intended for professional use only. Using it may result

in permanently damaging your device or losing the warranty.



USB device found at bus 002, device address 006.

Device identifier: 357923040985998 (SN: N/A)

Raw data transfer EP found at EP2.

Ping attempt 1 (250 ms)

Server application: 1.7.2

Found product RM-696 rev. 1507

Server implements softupd protocol version 1.8

Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_009

Image moslo not present

Image mmc not present

Image tar skipped

Image config skipped



Battery level 73 %, continuing.



    image        [state    progress         transfer     flash speed]

---------------------------------------------------------------------

[x] cert-sw      [finished   100 %       1 /       1 kB      NA     ]

[x] cmt-2nd      [finished   100 %      95 /      95 kB      NA     ]

[x] cmt-algo     [finished   100 %     789 /     789 kB      NA     ]

[_] cmt-mcusw    [finishing   25 %    6050 /    6050 kB    3768 kB/s]

[x] xloader      [finished   100 %      23 /      23 kB      NA     ]

[x] secondary    [finished   100 %      94 /      94 kB      NA     ]

[x] kernel       [finished   100 %    2714 /    2714 kB    1935 kB/s]

[_] rootfs       [finishing  100 %   32768 / 1170206 kB      NA     ]

ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error



    image        [state    progress         transfer     flash speed]

---------------------------------------------------------------------

[x] cert-sw      [finished   100 %       1 /       1 kB      NA     ]

[x] cmt-2nd      [finished   100 %      95 /      95 kB      NA     ]

[x] cmt-algo     [finished   100 %     789 /     789 kB      NA     ]

[x] cmt-mcusw    [finished   100 %    6050 /    6050 kB    3768 kB/s]

[x] xloader      [finished   100 %      23 /      23 kB      NA     ]

[x] secondary    [finished   100 %      94 /      94 kB      NA     ]

[x] kernel       [finished   100 %    2714 /    2714 kB    1935 kB/s]

[f] rootfs       [finishing    0 %   32768 / 1170206 kB      NA     ]

Fetching error list:

========================================

bb5_rdc_cert_read failed

bb5_rdc_cert_read failed

bb5_rdc_cert_read failed

bb5_rdc_cert_read failed

bb5_rdc_cert_read failed

mmc: sfdisk returned status 1

mmc: Could not exec 'tune2fs -L rootfs /tmp/sudmmcXVNAv3/internal0p2'

mmc: Could not remove mount directory /tmp/sudmmcXVNAv3/mnt: No such file or directory

[Pipe   4] Finishing in error state with status 1

========================================



ERROR: Failed to flash images

Never got that error before... freaked me out. Also, i know that this image was working fine in the morning... maybe after cold flash errors something weird happened?

Re: Need help!! N9 not flashing mmc!!

Repeating:
where are the --no-preserve AND the -F emmc.bin parameters

right now you only try to flash firmware (-F main.bin)
without flashing eMMC you will never get partitioning clean again

--edit
oh and that error I have seen too often (very bad) :(