No Bluetooth to PC after PR1.3
With my N9 running on PR1.2, I connected it flawlessly to my Win7 desktop via bluetooth. There was kind of a registering procedure on the PC for this particular device and voila, there it was with a dedicated folder in the system.
Now with 1.3, win explorer crashes when clicking on the N9 folder. Crash-report says it's caused by btwapi.dll which is the Broadcom Bluetooth module. I'm guessing it's due to changed adresses or any kind of failed Identification but I can't really tell. Solution might be to reinstall the software/driver (as of here) and re-register the device. Anyone else experienced similar? |
Re: No Bluetooth to PC after PR1.3
Quite normal IMO, because pairing data at N9 side already gone...if you update via NSU/NS/flashing
if OTA, probably not the case unless you perform Restore Settings |
Re: No Bluetooth to PC after PR1.3
Quote:
Well, I seldom have issues with my BT Mouse paired to my Vaio; it just stops responding. So, I just power off the Vaio BT (we have a dedicated switch). After a couple of secs, power on and it works. Also a Broadcom. If that doesn't work, just delete the pairing and redo-it via Nokia Suite or pc suite. In this way, it will install the Nokia drivers for the different modules. According to my understanding, the BT communication is encoded via a key. Sometimes, this key gets lost on one side. |
Re: No Bluetooth to PC after PR1.3
Why u no ssh?
My BT seems to work flawlessly from ASUS K50ID /w Win 8 RP with some random Azureware driver set, don't remember the BT module right now, I could check it at home. (This I found at ASUS Support: Built-in Bluetooth™ V2.1+EDR (optional) ) |
Re: No Bluetooth to PC after PR1.3
Quote:
Quote:
Clicking on that folder while the N9(PR1.2) was not connected, it said "device not found" or sth. Now it immediately crashes, so not possible to right-click, go to properties or edit any settings. Doesn't sound like a lost key to me. The bad thing is, it doesn't appear in the device manager, so I see no way to remove the device/folder. So only way is to remove and reinstall the Broadcom driver? Quote:
|
Re: No Bluetooth to PC after PR1.3
So I just reinstalled the BT-driver (Broadcom 2046 Bluetooth 2.1+EDR USB Dongle with First Connect) after I found out it didn't work at all. That was the main problem, the N9 or the update is innocent... :)
First, everything looked fine. On the N9 my PC showed up and vice versa. I paired them with the code given and the PC shows a connection. BUT no dedicated folder (like before) is created. AND device manager shows 2 unrecognized perirepheral BT-devices. Updating drivers failed due to "no drivers found" (several different attempts), restarted PC too. :mad: So BT works fine now, but device won't show up in explorer as Windoze misses N9 drivers. Didn't have this missing-driver-issue before. EDIT: Problem mysteriously solved itself. The dedicated folder now shows up like before and I have all explorer possibilities. But no clue though what changes on either side did the trick. N9 Magic... :cool: |
All times are GMT. The time now is 11:29. |
vBulletin® Version 3.8.8