Nokia N9 Failed to flash
 

tried to flash Nokia n9 64gb with correspondent firmaware that is on the back of the simtray, when I get At the end this

C:\N9>flasher -i
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1501
Server implements softupd protocol version 1.8
Success


also

got this while flashed

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1501
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_30.2012.07-1_PR_009
Sending ape-algo image (7103 kB)...
100% (7103 of 7103 kB, avg. 20709 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1501
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3.280.04.1_PR_280
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 59 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[_] cmt-algo [init 100 % 789 / 789 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1310 kB/s]
[_] rootfs [writing 3 % 41984 / 1170774 kB 8179 kB/s]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[f] cmt-algo [init 0 % 789 / 789 kB NA ]
[-] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1310 kB/s]
[x] rootfs [finished 100 % 1170774 / 1170774 kB 8780 kB/s]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Timeout while waiting for the HWBREAK
Could not reboot into cold bootmode
[Pipe 6] Finishing in error state with status 1
========================================

ERROR: Failed to flash images



any insights or help, I know is 2015 but just like my N9 and cant jus leave it

Re: Nokia N9 Failed to flash
 

i didnt have an idea why it doesnt work but why you didnt intend to install 40.xxx with version 001?

Seems you are in the old Software version, so you can here update with 001. the 280 is limiting the psoibilitys for the future.

Re: Nokia N9 Failed to flash
 

Check this thread:
http://talk.maemo.org/showthread.php?t=82693

but is does not look good :(

check downloaded firmware for correct md5sum
could be broken download or broken eMMC

btw. you try flashing with variant 280 while your N9 has 009
not a problem but just ...

Re: Nokia N9 Failed to flash
 

already is showing is updated to v40 280 very strange, but no imei problem did not disappear

Re: Nokia N9 Failed to flash
 

you think zeroize will help

Re: Nokia N9 Failed to flash
 

Dont see here 1.3 version, anyway it is already showing v40 280 :(

Re: Nokia N9 Failed to flash
 

What is your suggestion at this point

Re: Nokia N9 Failed to flash
 

Not much, just above.
Guess you also have a broken eMMC :(

You may try zeroize, also cold boot '-c', but I do not have much hope

Re: Nokia N9 Failed to flash
 

the phone boots and works, except random not responding and no imei is showing in about product

what is cold boot -c

Re: Nokia N9 Failed to flash
 

Test With This Code:
this code erase all files in your n9