Should I replace the above digitizer or the touch screen panel(lcd) below that ?
3 Attachment(s)
guys plzz help me out... I am thinking to order either the digitizer or the touch screen panel from ebay... so plzz help me... which part should I replace in this state of my n900... everything works fine but the visibility in that area is a bit less.. and some times I am not able to move the stylus.. it slips at places and doesnt do anything on the touch screen... so guys plzz help me with this... I have attached 3 images of it.. take luk at them n plz tell me that which part needs to be replaced. I havent used any screen protectors since I got the phone. and I dont know where to get the right genuine part from nokia. so plzz help me... its very urgent.. plzz help :( :confused:
|
Re: Should I replace the above digitizer or the touch screen panel(lcd) below that ?
The abrasion looks like it's only on the touch screen - you kind of reference two different parts, but there is only one - technically it's called the 'touch window assembly' - I'd start with that first. Once you begin disassembly you'll very quickly be able to tell if the damage goes deeper down to the LCD panel underneath. There is quite a gap between these two components, so it's very unlikely the LCD has any damage.
I have a spare that I bought from a cell phone market in the Philippines - it cost me a little under $40 USD. |
Re: Should I replace the above digitizer or the touch screen panel(lcd) below that ?
Second dchky on that.
You just want the digitizer. Easy to recognize, it's the panel with N900 printed in chrome in the top right corner. I need one of those myself after a screen protector ripped the polarizing layer off when I was replacing it with a new protector. |
Re: Should I replace the above digitizer or the touch screen panel(lcd) below that ?
i don't know if this includes the window part as i can't see it from the picture. you could mail and ask them? :D
http://www.thenokiaparts.com/eng/tuo...framing-253144 |
Re: Should I replace the above digitizer or the touch screen panel(lcd) below that ?
Yea, Just looks like the Digitizer thats damaged on that, Doubt you've managed to damage the LCD.
|
Re: Should I replace the above digitizer or the touch screen panel(lcd) below that ?
After you change the Digitizer, you should get a screen protector. I recommend the 3M Vikuiti, I use it for over a year and it still looks great.
|
Re: Should I replace the above digitizer or the touch screen panel(lcd) below that ?
invisibleshield is good too. but makes the screen bit sticky to use with finger. i got used to it though ;)
|
Re: Should I replace the above digitizer or the touch screen panel(lcd) below that ?
The digitizer and the LCD is not one part. You will only need to change the digitizer.
|
Re: Should I replace the above digitizer or the touch screen panel(lcd) below that ?
yea thats wat i was thinking too... so kindly i request all to plz help me find good digitizer in US... that can work as a genuine one... does nokia sells it ?
|
Re: Should I replace the above digitizer or the touch screen panel(lcd) below that ?
Digitizer is surely damaged. For lcd not sure. If you start you n900 does the screen show correctly? Upload a picture when your N900 is in main menu if you wish.
|
All times are GMT. The time now is 12:39. |
vBulletin® Version 3.8.8