maemo.org - Talk
Page 1 of 5 1 23 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Nokia N9 / N950 (https://talk.maemo.org/forumdisplay.php?f=51)
-   -   N9 bricked, cannot be flashed. (https://talk.maemo.org/showthread.php?t=86925)

Wowfunhappy 2012-09-19 16:33
N9 bricked, cannot be flashed.
 
Hi! Sorry for filling the forums for yet another "My N9 is bricked thread", but I've tried reading through past threads and nothing seems to work. I need help...

About a week ago, my Nokia N9 ran out of battery and turned off. I plugged it in and left it for several hours so it could charge. When I tried to boot it, I found myself in a reboot loop: the nokia logo showed up, then the phone turned off and tried to reboot itself.

I decided the easiest thing to do would be to reflash the phone, which I'd done many times before. However, no matter how many times I try, the flash always fails.

Code:
sh-3.2# flasher -f -F firmware.bin
flasher 3.12.1 (Oct  5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 29, device address 7.
Device serial number is N/A
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 35305 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 29, device address 7.
Device serial number is N/A
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 100 %, continuing.

    image        [state    progress        transfer    flash speed]
---------------------------------------------------------------------
[x] cert-sw      [finished  100 %      1 /      1 kB      NA    ]
[x] cmt-2nd      [finished  100 %      95 /      95 kB      NA    ]
[x] cmt-algo    [finished  100 %    789 /    789 kB      NA    ]
[x] cmt-mcusw    [finished  100 %    6050 /    6050 kB    3123 kB/s]
[x] xloader      [finished  100 %      23 /      23 kB      NA    ]
[x] secondary    [finished  100 %      94 /      94 kB      NA    ]
[x] kernel      [finished  100 %    2714 /    2714 kB    1942 kB/s]
[_] rootfs      [writing    16 %  230400 / 1170282 kB    8263 kB/s]
Raw data transfer failed: Invalid argument

    image        [state    progress        transfer    flash speed]
---------------------------------------------------------------------
[x] cert-sw      [finished  100 %      1 /      1 kB      NA    ]
[x] cmt-2nd      [finished  100 %      95 /      95 kB      NA    ]
[x] cmt-algo    [finished  100 %    789 /    789 kB      NA    ]
[x] cmt-mcusw    [finished  100 %    6050 /    6050 kB    3123 kB/s]
[x] xloader      [finished  100 %      23 /      23 kB      NA    ]
[x] secondary    [finished  100 %      94 /      94 kB      NA    ]
[x] kernel      [finished  100 %    2714 /    2714 kB    1942 kB/s]
[f] rootfs      [writing      0 %  230400 / 1170282 kB    8263 kB/s]
Fetching error list:

ERROR: Failed to flash images
I've tried using different computers, redownloading the firmware image, etc.

The nokia logo doesn't even show up anymore. When I plug the phone in, the LED turns on for a bit, then turns off. Nothing ever shows up on the screen.

Any ideas?

thedead1440 2012-09-19 16:42
Re: N9 bricked, cannot be flashed.
 
Prepared to lose data?

Try:

flasher -f -F main.bin --erase-user-data=secure

Wowfunhappy 2012-09-19 16:49
Re: N9 bricked, cannot be flashed.
 
I'm prepared.

That doesn't work though, unfortunately.

Code:
sh-3.2# flasher -f -F firmware.bin --erase-user-data=secure
flasher 3.12.1 (Oct  5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 26, device address 4.
Device serial number is N/A
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 38359 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 26, device address 4.
Device serial number is
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8

Battery level 100 %, continuing.
Erasing, this may take a while.
ERROR: Failed to erase user data using 'secure' method

ibrakalifa 2012-09-19 16:55
Re: N9 bricked, cannot be flashed.
 
http://www.meegoexperts.com/2011/12/...-dead-n9-life/ never try it before, but maybe it help, sorry mate..

Wowfunhappy 2012-09-19 17:00
Re: N9 bricked, cannot be flashed.
 
That's exactly what I've been trying to do, except I'm using the terminal built into OSX rather than using Ubuntu.

For whatever reason, Ubuntu kernel panics when I try to boot it on my 2012 Macbook Air. I could try borrowing a friend's computer but I don't think it would make a difference anyway... I'm running the same program.

ibrakalifa 2012-09-19 17:02
Re: N9 bricked, cannot be flashed.
 
Have you try phoenix?

Wowfunhappy 2012-09-19 17:02
Re: N9 bricked, cannot be flashed.
 
No, I haven't heard of that up until now... *goes to Google*

Edit: Downloading now

chiagn900 2012-09-19 18:00
Re: N9 bricked, cannot be flashed.
 
ok heres the trick..it happenes to my n9 too..under my assumtion that the n9 hasnt booted at all..aka theres no power to charge it..it happens whenever my phone completely drains.. what i do is..use an ORIGINAL NOT USB blackberry or nokia charger.. i hope you have nitroid installed..keep unplugging and plugging till it tells you to push button-up to boot to nitroid..it will charge after boot..once it boots to 10%.. you can boot to meemo

Wowfunhappy 2012-09-19 18:03
Re: N9 bricked, cannot be flashed.
 
Pheonix doesn't find my phone when I scan for devices... is there something i have to do?

Chiagn900, I don't have nitdroid installed, but I'm pretty sure my phone does have battery power. According to the nokia flasher, the battery is at 100%...

Timpaxi 2012-09-19 18:05
Re: N9 bricked, cannot be flashed.
 
Quote:
Originally Posted by Wowfunhappy (Post 1269173)
No, I haven't heard of that up until now... *goes to Google*

Edit: Downloading now
Yeah, try with phoenix and dead phone flash on! It should bring it back to life.


All times are GMT. The time now is 12:50.
Page 1 of 5 1 23 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8