Helpme in flashing Nitroid to N9
 

1.
cd path_to_directory_which_contains_your_flasher
flasher -a DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958_ARM.bin -k zImage.pr13 --flash-only=kernel -f -R


-- or single - before flash
2.
DFL61_HARMATTAN_30.2012.07-1.454.1_PR_LEGACY_454_ARM_RM-696_PRD_signed.bin

Mine file is this one

is it crct file or i have to dwnload this one {DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958_ARM.bin} ?

Re: Helpme in flashing Nitroid to N9
 

forum.nitdroid.com

Re: Helpme in flashing Nitroid to N9
 

No reply in NItroid Forum......so asking here :/ :(

Re: Helpme in flashing Nitroid to N9
 

1. its --flash not -flash

2. Use the firmware file for your device; don't download pr legacy 001 when yours is 454 as you'll get downgrade disallowed error...

Re: Helpme in flashing Nitroid to N9
 

flasher -a DFL61_HARMATTAN_30.2012.07-1_PR_LEGACY_001-OEM1-958_ARM.bin -k zImage --flash-only=kernel -f -R
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result in permanently damaging your device or losing the warranty.

Picked ape-algo from a FIASCO file
Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_30.2012.07-1_PR_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 13886 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version <none>
Image cert-sw not present
Image cmt-2nd skipped
Image cmt-algo skipped
Image cmt-mcusw skipped
Image xloader skipped
Image secondary skipped
Image moslo skipped
Image rootfs skipped
Image mmc skipped
Image tar skipped
Image config skipped

Battery level 77 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[ ] kernel [pending 0 % 0 / 0 kB NA ]
ERROR: SU_BEGIN_IMAGE_UPDATE_REQ terminated with error code 10: Security failure

Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Devicelock ON: cannot flash unsigned image
========================================

ERROR: Failed to flash images


nw wt to do :(

Re: Helpme in flashing Nitroid to N9
 

I dont know anything about flashing but I see:Devicelock ON: cannot flash unsigned image
I think you need to remove lock code

Re: Helpme in flashing Nitroid to N9
 

Two things:

1) Like Mikkosssss said device lock is on; turn it off

2) You are trying to use the zimage for pr1.2 or pr1.3? What firmware do you have on your device? The DFL61_HARMATTAN_30.2012.07-1_PR_LEGACY_001-OEM1-958_ARM.bin file is a pr1.2 firmware image so are you on pr1.2 then? If so, use the zimage for pr1.2 from forum.nitdroid.com...


Please read properly when attempting to do things; all this very clearly mentioned!

Re: Helpme in flashing Nitroid to N9
 

guy4ever4u, I installed nitdroid on first try. You have to read instructions carefully. N9 doesn't behave weird. If you follow procedures correctly, it always listens to you.

All questions are perfectly answered in nitdroid forum. And I dont think it's a good idea to jump into nitdroid before you are familiar with command line n terminal

Re: Helpme in flashing Nitroid to N9
 

do viber voice call snd tango video chat work on nitdroid?

Re: Helpme in flashing Nitroid to N9
 

Last I used, doesn't work properly...