Thread
:
Slightly unusual flashing problem
View Single Post
hellnick
2011-05-14 , 13:24
Posts: 243 | Thanked: 146 times | Joined on Dec 2009 @ Knowhere
#
1
Attempting to flash the EMMC and firmware on my N900 - flasjing the EMMC seems to go okay
Raw data transfer EP found at EP2.
Image(s) flashed successfully in 25.843 s (9331 kB/s)!
but flashing the firmware just throws this up
Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
Version 1.4.14.9+0m5
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
1c8.
Raw data transfer EP found at EP2.
Using flashing protocol Mk II.
C:\flasher>
There's a load more of the "image 'xloader'" stuff but there doesn;t seem to be anything informative there - the firmware flashing stage takes less than a second before dropping back to the prompt. Restart the N900 and it looks like this:
Anyone have any suggestions as to what I've done wrong and how to correct it?
Cheers
__________________
Please don't clutter the forum with questions that have been answered many times previously. Either use
Power Search
or check the following useful threads.
http://wiki.maemo.org/Frequently_asked_questions
http://en.wikipedia.org/wiki/Nokia_N900
http://wiki.maemo.org/N900
Last edited by hellnick; 2011-05-14 at
14:52
.
Quote & Reply
|
hellnick
View Public Profile
Send a private message to hellnick
Find all posts by hellnick