Well, after 2 hours of attempts, nothing happens.

For what I read, the last solution is Phoenix
But, before to make another Big Mistake, i wait what the gurus says

This is the procedure I think to follow
0. DO NOT CONNECT THE PHONE with PC until Phoenix does not ask (even then connect the phone in “Switched Off” condition)

1. download Phoenix from here
2. close antivirus
3. install Phoenix as administrator

from here
4. run Phoenix as administrator and select NO CONNECTION as conection type
5. click file | open product and set RM-696
6. click tools | select data package download
7. insert code (in my case 059K0Z2)
8. click check availability and download

in alternative I think is possible to extract 059K0Z2_RM-696 NDT GERMANY CYAN 16GB.tar.gz in C:\Program Files (x86)\Nokia\Phoenix\Products\RM-696 but I prefer restart from zero

9. select firmware update | flashing
10. press "..." and select the language pack / product code you want to flash on phone
11. tick Dead phone USB flashing
12. click Refurbish
13. a new windows with instructions to connect the phone appears. Follow the instructions and press ok


I'm checked until 11. I'm ready to refurbish

I can't establish when the phone is on or off. So I thought:
B1. disconnect the battery
B2. connect the battery (one little white led flash)
B3. press for 8s the power button
B4. connect the phone via usb when asked by Phoenix


I wait your approval. Thanks