View Single Post
Posts: 803 | Thanked: 1,585 times | Joined on Aug 2014
#101
Just wanted to say many thanks to rinigus as installed Sailfish OS 3.3.0.16 to XZ2 Compact H8324 Dual Sim today for first time and no problem with USB tether to Mac OSX Catalina 10.15.4. As this device had been in storage for a while had to update to 52.0.A.11.32 being last available Pie update before unlocking bootloader.

Unlocked bootloader via Mac and for once there was no output
in terminal similar to:
HTML Code:
OKAY [ 1.716s]
finished. total time: 1.720s
however upon removing USB C from device it rebooted into normal device unlocked screen and all well to proceed:
HTML Code:
iMac:Sailfish_OS-testing-20200512-3.3.0.16-h8324-0.2.0.2 adrian$ bash ./flash.sh
Detected Mac OS X - Version: 10 15 4-
Searching device to flash..
Found 1 devices: BH90065YGY 
Fastboot command: fastboot -s BH90065YGY  
Flashing boot partition..
Sending 'boot_a' (20220 KB)                        OKAY [  0.435s]
Writing 'boot_a'                                   OKAY [  0.427s]
Finished. Total time: 0.881s
Flashing dtbo partition..
Sending 'dtbo' (8192 KB)                           OKAY [  0.174s]
Writing 'dtbo'                                     OKAY [  0.166s]
Finished. Total time: 0.354s
Flashing userdata partition..
Sending sparse 'userdata' 1/3 (515296 KB)          OKAY [ 10.867s]
Writing 'userdata'                                 OKAY [  0.001s]
Sending sparse 'userdata' 2/3 (493226 KB)          OKAY [ 13.679s]
Writing 'userdata'                                 OKAY [  0.001s]
Sending sparse 'userdata' 3/3 (373442 KB)          OKAY [ 12.449s]
Writing 'userdata'                                 OKAY [  0.001s]
Finished. Total time: 37.040s
Flashing system_b partition..
Sending sparse 'system_b' 1/2 (524284 KB)          OKAY [ 11.008s]
Writing 'system_b'                                 OKAY [  0.001s]
Sending sparse 'system_b' 2/2 (69772 KB)           OKAY [ 17.399s]
Writing 'system_b'                                 OKAY [  0.001s]
Finished. Total time: 87.130s
Flashing vendor_a partition..
Sending 'vendor_a' (376 KB)                        OKAY [  0.018s]
Writing 'vendor_a'                                 OKAY [  0.001s]
Finished. Total time: 1.955s
Flashing vendor_b partition..
Sending 'vendor_b' (376 KB)                        OKAY [  0.018s]
Writing 'vendor_b'                                 OKAY [  0.001s]
Finished. Total time: 70.451s
Flashing oem partition..
Sending 'oem_a' (194436 KB)                        OKAY [  4.090s]
Writing 'oem_a'                                    OKAY [  3.925s]
Finished. Total time: 78.295s
Flashing vbmeta partition...
Sending 'vbmeta' (4 KB)                            OKAY [  0.009s]
Writing 'vbmeta'                                   OKAY [  0.001s]
Finished. Total time: 0.022s

Flashing completed.

Remove the USB cable and bootup the device by pressing powerkey.
Attached Images
 

Last edited by aspergerguy; 2020-05-16 at 11:00. Reason: Addition
 

The Following 5 Users Say Thank You to aspergerguy For This Useful Post: