How your BIOS version show up in BIOS settings is it 2.0 or 2.00-T01? Try this first (later I give more instruction for test that hardware is fully working): Boot with Free-DOS 1.3 Live (you can also use USB CD-drive and CD-ROM for boot, remember set it in BIOS settings boot order) - After boot choose Use Live enviroment - Write to command line: fdisk (starts partitioner) y (large support) 4 (display partition information) - What total disk space you see? What partition you see? - Push y-key to see logical drives if there is - What reading in logical drive system (if there is)? (you can also boot with USB-floppy drive with Win98SE boot floppy and there should be fdisk to use same way, except show Linux partitions as non-DOS and does not support over 137GB SSD fully) What Meego version you tested?