Many (including me) were particularly annoyed with the introduction of the PR1.2 menu, which had slower (much slower) kinetic scrolling. Here's a modified hildon-desktop package which has this reversed, and includes all fixes post PR1.2 (call UI glitching etc...). Download link: http://mohammadag.xceleo.org/public/...+0m5_armel.deb It will not install via the application manager Package should only be installed on PR1.2, it will not conflict with future updates (if any).
I have built and installed latest hildon-desktop from gitorious, and it actually seems to fix this. If anyone wants to try, the deb can be found here (completely on your own risk, of course): http://81.216.215.120/maemo/hildon-d...+0m5_armel.deb UPDATE: This is an updated link with the version set to 2.2.138-1+0m5 (the same as in PR1.2). The real version still is 2.2.141-1 (or something like that) as per gitorious earlier today. This should solve the dependency problems introduced by my first attempt. Caveat: This is the first time ever I build a deb file or compile anything for maemo at all. EDIT: Note that this will overwrite any custom transitions, so you may want to backup /usr/share/hildon-desktop/transitions.ini . Also, note that this version should support setting of scrolling speed, see http://talk.maemo.org/showthread.php...127#post798127 (not tested). If you can't do it from here without further instructions, then you probably shouldn't (and instead wait for a hopefully upcoming "unofficial pre-released updates" repository mentioned somewhere by MohammadAG and others)
In modified-hildon-desktop_2.1 the deceleration rate is controlled by gconf key /apps/osso/hildon-desktop/decel_rate. This is an integer which is the decel rate multiplied by 100. Originally, the rate was 1.1 (corresponding to setting the key to 110). In PR1.1 it was reduced to 0.99, and in PR1.2 to 0.9. in MohammadAG's version it is 0.99, the same as in PR1.1. You can try those settings and others, and see what works for you best. This key is only read when hildon-desktop starts, so you need to restart hildon-desktop after changing the value for change to take effect. This can be done by rebooting, or by running the command killall hildon-desktop