sb 1-1:1.0: uevent [122824.725524] uvcvideo 1-1:1.0: usb_probe_interface [122824.725524] uvcvideo 1-1:1.0: usb_probe_interface - got id [122824.725585] uvcvideo: Found UVC 1.00 device USB 2.0 PC Cam (174f:5271) [122824.727874] input: USB 2.0 PC Cam as /class/input/input21 [122824.784606] usb 1-1: adding 1-1:1.1 (config #1, interface 1) [122824.784790] usb 1-1:1.1: uevent [122824.784881] /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/core/inode.c: creating file '057' [122824.785278] usb 1-1: New USB device found, idVendor=174f, idProduct=5271 [122824.785308] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [122824.785308] usb 1-1: Product: USB 2.0 PC Cam [122824.785339] usb 1-1: Manufacturer: Image Processor [122824.785369] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [122824.785400] hub 1-0:1.0: port 1 enable change, status 00000503 [122860.465850] Forced hostmode error: no device attached [122860.465942] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [122860.465972] hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [122860.466003] usb 1-1: USB disconnect, address 57 [122860.466003] usb 1-1: unregistering device [122860.466033] usb 1-1: usb_disable_device nuking all URBs [122860.466064] musb_hdrc musb_hdrc: shutdown urb cf3e4780 ep3in-intr [122860.466064] usb 1-1: unregistering interface 1-1:1.0 [122860.526611] usb 1-1:1.0: uevent [122860.526672] usb 1-1: unregistering interface 1-1:1.1 [122860.526763] usb 1-1:1.1: uevent [122860.527191] usb 1-1: uevent [122860.682464] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [122860.807434] usb 1-1: new high speed USB device using musb_hdrc and address 58 [122860.964843] usb 1-1: skipped 1 descriptor after configuration [122860.964874] usb 1-1: skipped 5 descriptors after interface [122860.964904] usb 1-1: skipped 1 descriptor after endpoint [122860.964904] usb 1-1: skipped 13 descriptors after interface [122860.965087] usb 1-1: default language 0x0409 [122860.965942] usb 1-1: uevent [122860.966094] usb 1-1: usb_probe_device [122860.966094] usb 1-1: configuration #1 chosen from 1 choice [122860.968353] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [122860.968566] usb 1-1:1.0: uevent [122860.968719] uvcvideo 1-1:1.0: usb_probe_interface [122860.968750] uvcvideo 1-1:1.0: usb_probe_interface - got id [122860.968841] uvcvideo: Found UVC 1.00 device USB 2.0 PC Cam (174f:5271) [122860.972259] input: USB 2.0 PC Cam as /class/input/input22 [122861.026580] usb 1-1: adding 1-1:1.1 (config #1, interface 1) [122861.026702] usb 1-1:1.1: uevent [122861.026763] /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/core/inode.c: creating file '058' [122861.027008] usb 1-1: New USB device found, idVendor=174f, idProduct=5271 [122861.027008] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [122861.027038] usb 1-1: Product: USB 2.0 PC Cam