Nokia-N900:~# start pulseaudio
pulseaudio (start) waiting
pulseaudio (stop) starting
pulseaudio (stop) starting
pulseaudio (stop) waiting
start: pulseaudio respawning too fast, stopped
Nokia-N900:~#

Nokia-N900:~# pulseaudio
W: main.c: This program is not intended to be run as root (unless --system is specified).
W: module-alsa-sink-old.c: Buffer underrun ! frames: 1920
AEP runtime switch bbaid1n-wr0-h9a22b--dbxpb--
>>>>>>>>>>>>>> Init begin >>>>>>>>>>>>>Init 1166
Init 1218
Init 1245
Init 1285
Init 1388
Init 1445
../execute/d4gnt560:
Init 2316
Init 2425

 RX ATTN profile = 2
TX ATTN profile = 2

 PA active in D-ALWE & U-ALWE

 PA NORMAL PROF

 A_BF_CN: DISABLED

 Noise robust VAD active in UPLINK and DOWNLINK

 XDRC ON

  AEP scalability: PREMIUM!

 Default: Two-mic front-end off.

 Default: AV-connector gaps detection off.
Init 2934
, Multiband-UDRCU_ALWE and D_ALWE; MDRC; AEC; IHF; AGC for dig-mics; 10 ms frames; NB (Fs=8kHz)., TX-iAVC enabled WNR=OFF Normal Audio profile. Whisper mode on ABE OFF, Rx-signal decimated
Init 2998
xdrc_tables.ls_limit_levels_dB100 *****  xdrc_tables.eq_limit_levels_dB100 ****** xdrc_tables.drc_ch_tbl_Hz
****************** INIT DONE ************* E: client-ext.c: client-ext.c: Can't obtain command line

^CE: module-alsa-sink-volume.c: This in not my sink, what to do?
E: voice-hw-sink-input.c: Master sink "sink.hw0" not found
E: voice-hw-source-output.c: Master source "source.hw0" not found
E: voice-cmtspeech.c: closing the modem instance
W: voice-util.h: voice_memchunk_pool empty, all 128 slots allocated
E: memblock.c: Memory pool destroyed but not all memory blocks freed! 1 remain.
Nokia-N900:~#