I have Nemo (fresh install) on eMMC so no problem for SD Class 10 or similar. I have tried to boot Nemo with u-boot and as I have told some weeks ago, but it has always failed to boot (many I/O errors -110) Today I have tried three times with flasher and the results has been always the same: No boot and many I/O errors In the past I have loaded many times MeeGo / Nemo kernel with flasher and it has always worked! So it is impossible that now it no longer works. I have done an experiment:Flashed a Power Kernel v49 without u-boot (before I had PK49 with latest Pali's u-boot) Booted Maemo one or two times (I don't remember) and then powered off. Loaded Nemo's Kernel with flasher This time Nemo has booted correctly without errors!!
sudo modprobe -r cdc_phonet ; ./flasher-3.5 -k zImage -l --boot='root=/dev/mmcblk0p5 rootwait rw console=ttyO2,115200n8 console=tty0 omapfb.vram=0:2M,1:2M,2:2M mtdoops.mtddev=2 panic=10'