View Single Post
JonWW's Avatar
Posts: 623 | Thanked: 287 times | Joined on Jan 2010 @ UK
#12
lshal -m outputs
Open backcover with MMC
Code:
platform_mmci_omap_hs_0_mmc_host property button.state.value = false
platform_mmci_omap_hs_0_mmc_host condition ButtonPressed = cover
platform_mmci_omap_hs_0_mmc_host_mmc_card_rca54613 removed
volume_uuid_B019_9D68 removed
platform_mmci_omap_hs_0_mmc_host_mmc_card_rca54613_storage_mmc_sd_mmc removed
Close backcover with MMC
Code:
platform_mmci_omap_hs_0_mmc_host property button.state.value = true
platform_mmci_omap_hs_0_mmc_host condition ButtonPressed = cover
platform_mmci_omap_hs_0_mmc_host_mmc_card_rca54613 added
platform_mmci_omap_hs_0_mmc_host_mmc_card_rca54613_storage_mmc_sd_mmc added
volume_uuid_B019_9D68 added
volume_uuid_B019_9D68 property volume.mount_point = '/media/mmc1'
volume_uuid_B019_9D68 property volume.is_mounted = true
Open backcover without MMC
Code:
platform_mmci_omap_hs_0_mmc_host property button.state.value = false
platform_mmci_omap_hs_0_mmc_host condition ButtonPressed = cover
Close backcover without MMC
Code:
platform_mmci_omap_hs_0_mmc_host property button.state.value = true
platform_mmci_omap_hs_0_mmc_host condition ButtonPressed = cover
From your output I would say you have lost the tiny magnet from the back cover as hal isn't reporting the removal/replacement of the back cover.

Having just re-checked the gconftool commands, they work fine with the backcover on but don't work when the cover is off. I found these long ago and thought they worked, maybe they did in PR1.2
Sorry about that.

If I were you I'd get on ebay and buy a new backcover.
 

The Following 2 Users Say Thank You to JonWW For This Useful Post: