View Single Post
mike727's Avatar
Posts: 70 | Thanked: 142 times | Joined on Aug 2015 @ Australia
#24
Originally Posted by peterleinchen View Post
Mike, after flashing eMMC (and firmware) you will need to restore telephony by flashing the chinese CMT only?
Yes, didn't forget that. No errors.

sudo flasher -F '/home/michael/Desktop/china/DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_003-OEM1-958_ARM.bin' --flash-only=cmt -f -R

Will go through the whole 'Deadly CMT' thread again.

Edit:
Acquired phone from seller. When last used years ago, telephony worked fine. Seller tested it, telephony was not working. I acquired the phone, tested telephony, cleaned SIM & sandwiched paper: nothing.

Before any flashing:
michael@michael-G41MT-ES2L ~ $ sudo flasher -i
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 001, device address 011.

Device identifier: 35166########37 (SN: N/A)
Found device RM-696, hardware revision 1601
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_003
Success
Removed SIM card -> Flashed 299 (md5'd) -> errors with CMT -> flashed 003 CMT (md5'd) -> flashed Chinese eMMC (correct type?) -> Flashed 003 CMT

Now -i outputs :
michael@michael-G41MT-ES2L ~ $ sudo flasher -i
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

USB device found at bus 001, device address 030.

Device identifier: 35166########37 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1601
Server implements softupd protocol version 1.8
Success
Telephony, still not working.

Last edited by mike727; 2017-07-16 at 23:41.