Thread
:
[Thread Closed][Pre-Pre-Pre Announce]Black Aluminium replacement body & backcover for N900
View Single Post
dr_frost_dk
2012-05-01 , 00:55
Posts: 1,503 | Thanked: 2,688 times | Joined on Oct 2010 @ Denmark
#
72
If the test pads (5V) does not have protection then adding a small fuse to the 2.5mm plug base should not be a problem.
As for my system, it is sufficient for me since i have 20+ 4.2V sources/power supply's, else a 5V - 4.2V (with charge controller) chip does not take up much space, i have many laying around from the EGO-T E-Cigs i order home for people, they come with an actual LiPo/ION charger that takes 5V 400mA (USB 1/2 Limit) and have an indicator light to show when battery is at 4.2V, but this is just an example.
But having another method of charging is still very good, i on average use my USB one time a week MAX.
I have been thinking of upgrading my setup with some copper lanes (flat copper...) in the top of the cover to the 2.5mm and then some lanes on top of the battery, so when the cover is on the battery is connected to the 2.5mm, this is just to eliminate the wires that attaches my Dual Scud to my cover
__________________
N900 @ 850MHz (LV) & 3044mAh Battery
Battery Tests and Battery Mod / Homemade 3000mAh XL Battery
- (
DONATE
)
Custom Brightness & No Light Sensor
N900 DIY Micro Amplifier, turn your N900 into a home stereo
Fix you USB before and after it breaks
Feel free to contact me through PM, Skype or G.Talk
The Following 2 Users Say Thank You to dr_frost_dk For This Useful Post:
Estel
,
Sourav.dubey
dr_frost_dk
View Public Profile
Send a private message to dr_frost_dk
Visit dr_frost_dk's homepage!
Find all posts by dr_frost_dk