Hi John

That seems to work -- the Memory applet now shows that i have 492.8MB available as 100% of my 16GB SDHC.

I have run an sfdisk -ls and it shows that /dev/mmcblk0p4 has somehow grabbed the remaining storage. Info from sfdisk is as follows:

/home/user # sfdisk -ls
/dev/mmcblk0: 15694336

Disk /dev/mmcblk0: 490448 cylinders, 4 heads, 16 sectors/track
Units = cylinders of 32768 bytes, blocks of 1024 bytes, counting from 0

Device Boot Start End #cyls #blocks Id System
/dev/mmcblk0p1 1 15800 15800 505600 c W95 FAT32 (LBA)
/dev/mmcblk0p2 0+ 0 1- 31+ 83 Linux
/dev/mmcblk0p3 15801 490447 474647 15188704 83 Linux
/dev/mmcblk0p4 0 - 0 0 0 Empty
/dev/mmcblk1: 123008

Disk /dev/mmcblk1: 3844 cylinders, 4 heads, 16 sectors/track
Warning: The partition table looks like it was made
for C/H/S=*/8/32 (instead of 3844/4/16).
For this listing I'll assume that geometry.
Units = cylinders of 131072 bytes, blocks of 1024 bytes, counting from 0

Device Boot Start End #cyls #blocks Id System
/dev/mmcblk1p1 0+ 960 961- 122959+ 6 FAT16
/dev/mmcblk1p2 0 - 0 0 0 Empty
/dev/mmcblk1p3 0 - 0 0 0 Empty
/dev/mmcblk1p4 0 - 0 0 0 Empty
total: 15817344 blocks

My external card is 128 MB and the internal is a 16GB SDHC

Thanks for the advice. Looking forward to getting things back to the way they were before I got ambitious.