View Single Post
Posts: 20 | Thanked: 14 times | Joined on Oct 2011
#174
Originally Posted by Fabry View Post
I have Nemo (fresh install) on eMMC so no problem for SD Class 10 or similar.
I have tried to boot Nemo with u-boot and as I have told some weeks ago, but it has always failed to boot (many I/O errors -110)

Today I have tried three times with flasher and the results has been always the same: No boot and many I/O errors

In the past I have loaded many times MeeGo / Nemo kernel with flasher and it has always worked!
So it is impossible that now it no longer works.

I have done an experiment:
  1. Flashed a Power Kernel v49 without u-boot (before I had PK49 with latest Pali's u-boot)
  2. Booted Maemo one or two times (I don't remember) and then powered off.
  3. Loaded Nemo's Kernel with flasher

This time Nemo has booted correctly without errors!!
I deny that: I just successfully booted SHR with:
sudo modprobe -r cdc_phonet ; ./flasher-3.5 -k zImage -l --boot='root=/dev/mmcblk0p5 rootwait rw console=ttyO2,115200n8 console=tty0 omapfb.vram=0:2M,1:2M,2:2M mtdoops.mtddev=2 panic=10'
with U-boot installed where it was.
I can't imagine anything you can try except getting battery and USB away for a couple of sec.