View Single Post
F2thaK's Avatar
Posts: 4,365 | Thanked: 2,467 times | Joined on Jan 2010 @ Australia Mate
#1
1. Get the flasher software released for Harmattan at:
http://tablets-dev.nokia.com/maemo-d...-downloads.php

(You want Flasher 3.12.1 thats the harmattan one, the other flasher-3.5 2.5.2.2 didn't detect my device.)

2. Then you will need to get the firmware image for your device, I used NaviFirm from http://www.symbian-toys.com/navifirm.aspx
Ensure you get the correct firmware!

3. Run Harmattan Flasher and type:

To flash ONLY rootFS:
flasher -F FIRMWAREIMAGE.bin -f

or

To flash root and EMMC use this command:
Flasher -f -F rootFS.bin -F EMMC.bin -R

4. Turn off N9 and plug into computer. Hold off button until the flasher detects the boot loader and starts flashing. (NB: May take several attempts at holding power button)

(5.) For Windows users, you may have to open the installing device drivers window once N9 is plugged in and "skip Windows driver Lookup".







Source: http://forum.meego.com/showthread.php?t=4728

Another more detailed version: http://forum.meego.com/showpost.php?...9&postcount=41

Last edited by F2thaK; 2011-11-11 at 10:43.
 

The Following 9 Users Say Thank You to F2thaK For This Useful Post: