View Single Post
Posts: 79 | Thanked: 719 times | Joined on May 2014 @ Buenos Aires, Argentina
#17
Originally Posted by Malakai View Post
Could we see a picture of both an original n900 and one with the spacer frame (neo900), just to see the difference between them.
Here we go. First, both at an angle:
https://neo900.org/stuff/werner/spac...-10-angled.jpg

Then, "Neo900" with N900 stacked on top:
https://neo900.org/stuff/werner/spac...11-stacked.jpg

And here they are side by side:
https://neo900.org/stuff/werner/spac...er-12-side.jpg

The mechanical assembly is a bit wobbly because I only have short screws and thus could only attach the case parts (barely) at two points, but you probably couldn't tell in the pictures.

I measured the overall thickness with a micrometer (not for precision but to get repeatable pressure), and obtained 17.9 mm for the unmodified N900 and 21.0-21.2 mm for the "Neo900", i.e., the height difference of nominally 3.3 mm is indeed there.

I hope this shows clearly enough how the two compare. And sorry for taking so long !

- Werner
 

The Following 14 Users Say Thank You to wpwrak For This Useful Post: