Active Topics
-
Porting apps to Leste (32)
to Maemo 7 / Leste by Arno_11 - 2 days, 6 hrs ago -
[ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900 (2,264)
to Maemo 5 / Fremantle by panjgoori - 4 days, 1 hr ago -
Full linux distros on Sailfish OS (254)
to SailfishOS by qoh - 4 days, 23 hrs ago - more...
|
2013-11-05
, 11:19
|
|
Posts: 5 |
Thanked: 0 times |
Joined on Nov 2013
|
#2
|
Just a quick note: My phone is not chinese, I don't think I have chinese firmware
|
|
2013-11-05
, 11:22
|
|
Posts: 236 |
Thanked: 223 times |
Joined on Apr 2011
@ switzerland
|
#3
|
Hello,
I am sure there is an easer way, but i am not really into this phone,
So, i would check your phone reference on the SIM tray (there is a sticker on the back of it) and search for it in Navifirm, you will then find the relevant version for your phone.
I am sure there is an easer way, but i am not really into this phone,
So, i would check your phone reference on the SIM tray (there is a sticker on the back of it) and search for it in Navifirm, you will then find the relevant version for your phone.
|
|
2013-11-05
, 11:23
|
|
Posts: 236 |
Thanked: 223 times |
Joined on Apr 2011
@ switzerland
|
#4
|
|
|
2013-11-05
, 11:34
|
|
Posts: 5 |
Thanked: 0 times |
Joined on Nov 2013
|
#5
|
Yeah, I followed the steps in that thread in order to attempt to flash my phone.
Since navifirm doesn't work, I downloaded the firmware respective to the code on my phone (059M0N2), pr1.3
Upon getting this error, I've tried a number of different firmwares I have downloaded here and there (mainly in responses to similar errors as mine) but the result is pretty much the same.
Since navifirm doesn't work, I downloaded the firmware respective to the code on my phone (059M0N2), pr1.3
Upon getting this error, I've tried a number of different firmwares I have downloaded here and there (mainly in responses to similar errors as mine) but the result is pretty much the same.
|
|
2013-11-05
, 11:50
|
|
Posts: 5 |
Thanked: 0 times |
Joined on Nov 2013
|
#6
|
After removing the phone from the computer and connecting it again, the "flasher -i" command yielded this result:
however, the same error occurs when attempting to flash.
Code:
c:\Program Files\Nokia\Flasher>flasher -i flasher 3.12.1 (Oct 6 2011) Harmattan WARNING: This tool is intended for professional use only. Using it may result in permanently damaging your device or losing the warranty. Suitable USB interface (bootloader/phonet) not found, waiting... Found device RM-696, hardware revision 1603 NOLO version 2.3.6 Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.398.3_PR_398 Success
|
|
2013-11-05
, 12:39
|
|
Posts: 494 |
Thanked: 111 times |
Joined on Aug 2010
@ Finland
|
#7
|
Originally Posted by and182
So is your phone product code that 059M0N2? Are you sure? Check that qr-code from settings-> Product info. Scan that code with some other phone.
Yeah, I followed the steps in that thread in order to attempt to flash my phone.
Since navifirm doesn't work, I downloaded the firmware respective to the code on my phone (059M0N2), pr1.3
Upon getting this error, I've tried a number of different firmwares I have downloaded here and there (mainly in responses to similar errors as mine) but the result is pretty much the same.
|
|
2013-11-05
, 14:33
|
|
Posts: 5 |
Thanked: 0 times |
Joined on Nov 2013
|
#8
|
It is the code that shows on the little sim card holder thingy. Apparently, the firmware that was installed didn't match that code. Neither does the firmware I installed now (which is the same).
Anyway, I solved it. Knowing the current firmware version, I searched for the same firmware and found it, attempted to flash with it et voilą.
From all the info I read while searching for a solution to my problem, I knew it had to be because I was installing a downgraded version of the firmware. However, "flasher -i" was not providing me with my firmware version.
By disconnecting the phone from the computer and attempting to turn it on (the phone wouldn't get past the NOKIA logo, it turned right back off) and connecting it again, somehow "flasher -i" outputted the current firmware, which allowed me to search for a compatible version for me to flash my phone.
Thanks anyways people, you can mark this as solved.
Anyway, I solved it. Knowing the current firmware version, I searched for the same firmware and found it, attempted to flash with it et voilą.
From all the info I read while searching for a solution to my problem, I knew it had to be because I was installing a downgraded version of the firmware. However, "flasher -i" was not providing me with my firmware version.
By disconnecting the phone from the computer and attempting to turn it on (the phone wouldn't get past the NOKIA logo, it turned right back off) and connecting it again, somehow "flasher -i" outputted the current firmware, which allowed me to search for a compatible version for me to flash my phone.
Thanks anyways people, you can mark this as solved.
Sorry for bringing this issue again, but after searching and searching I can't seem to find a solution for my specific scenario.
I attempted to flash my N9 using WinFlasher and I get the famous Downgrade disallowed error.
From what I gathered I must try to flash my phone with equal or higher version than what I currently have, however, I can't seem to find such a version. It becomes even harder because I don't know the current version of my phone.
Please help me. When I type "flasher -i" I get
c:\Program Files\Nokia\Flasher>flasher -f -F DFL61_HARMATTAN_40.2012.21-3_PR_LEG ACY_001-OEM1-958_ARM.bin flasher 3.12.1 (Oct 6 2011) Harmattan WARNING: This tool is intended for professional use only. Using it may result in permanently damaging your device or losing the warranty. Ping attempt 1 (250 ms) Server application: 1.7.2 Found product RM-696 rev. 1603 Server implements softupd protocol version 1.8 Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001 Image moslo not present Image mmc not present Image tar skipped Image config skipped Battery level 97 %, continuing. image [state progress transfer flash speed] --------------------------------------------------------------------- [_] cert-sw [init 0 % 0 / 0 kB NA ] [ ] cmt-2nd [pending 0 % 0 / 0 kB NA ] [ ] cmt-algo [pending 0 % 0 / 0 kB NA ] [ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ] [ ] xloader [pending 0 % 0 / 0 kB NA ] [ ] secondary [pending 0 % 0 / 0 kB NA ] [ ] kernel [pending 0 % 0 / 0 kB NA ] [ ] rootfs [pending 0 % 0 / 0 kB NA ] ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure image [state progress transfer flash speed] --------------------------------------------------------------------- [f] cert-sw [init 0 % 1 / 1 kB NA ] [ ] cmt-2nd [pending 0 % 0 / 0 kB NA ] [ ] cmt-algo [pending 0 % 0 / 0 kB NA ] [ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ] [ ] xloader [pending 0 % 0 / 0 kB NA ] [ ] secondary [pending 0 % 0 / 0 kB NA ] [ ] kernel [pending 0 % 0 / 0 kB NA ] [ ] rootfs [pending 0 % 0 / 0 kB NA ] Fetching error list: ======================================== bb5_rdc_cert_read failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed Downgrade disallowed (1355229319) [Pipe 0] Finishing in error state with status 10 ======================================== ERROR: Failed to flash imagesThank you very much