Reply
Thread Tools
megabigbug is offline megabigbug
2011-08-10 , 14:04
Posts: 4 | Thanked: 1 time | Joined on Mar 2011
#1
Hello,

I flashed my N900 following this tutorial: http://www.youtube.com/watch?v=O54KdLvTA2U and the maemo wiki http://wiki.maemo.org/Updating_the_tablet_firmware

here is the script I made:
Code:
#!/bin/bash

echo "~~> press 'u' on the N900"
echo "~~> insert the battery"
echo "~~> release 'u' on the N900 when flashing starts" 

sudo ./flasher-3.5 -F ../RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin -f

echo "~~> press 'u' on the N900"
echo "~~> press enter"
echo "~~> release 'u' on the N900 when flashing starts"

read

sudo ./flasher-3.5 -F ../RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f

echo "~~> press 'u' on the N900"
echo "~~> press enter"
echo "~~> release 'u' on the N900  when flashing starts"

read

sudo ./flasher-3.5 -F ../RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin -f -R

echo "~~> the previous command always fails the first time, press enter again"

read

sudo ./flasher-3.5 -F ../RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin -f -R

echo "~~> remove usb cable"

All worked fine, except the last reboot.
The device displays the nokia logo, dots, and it freezes on the second dot.

I also tried to enable R&D mode but it doesn't change anything.

Any idea where is the problem ?
 
Reply

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 17:09.

Contact Us - Home - Archive - Top