Originally Posted by ammyt

Yes change it to ${INT_CARD}p2

Originally Posted by ammyt

Yes change it to ${INT_CARD}p2

Originally Posted by luh3418

Still would not boot. I am guessing my SD Card is not the right version?

Originally Posted by luh3418

Fixed The SD card was not sitting properly.
dmesg | grep mmc0 said new high speed SDHC fwiw

Originally Posted by luh3418

OK now I need to mount the SD Card I have checked in the Nitdroid Forums but am not sure what now applies to the current installation
If I create /sdcard/extsd can/do I mount as suggested in the Forum:
mount -t vfat /dev/block/mmcblk0p1 /sdcard/extsd

If I should be posting this in the Nitdroid Forum please tell me.

Thanks again

Originally Posted by ammyt

OK So, let me get this straight, a one-tap installer/un-installer utility, and people here are screaming absolutely silly questions?
I thought I would stop giving detailed instructions once a one-tap auto-installer is here, but looks that we'll get back to the old fashioned way, that's how I started this thread in the first place.

1. Make sure that you have Extras, Extras-testing, Extras-devel repositories enabled.
2. Make sure that you don't have directory /and from past installation attempts/installations. If you do so proceed to step 6.
3. Copy NITDroid-Installer_0.2.8-8.deb to your N900, open your N900's file manager, navigate to where you put the NITDroid-Installer file.
4. Tap on the installer file, app. manager should launch, accept and continue to install.
5. You should have now two icons on your apps list.
6. If you have directory /and existing, launch the Un-Installer first, if you don't, ignore this step.
7. Launch the installer, you will figure out you're way from there.

To reflash a custom eMMC:
1. Download the custom eMMC file: http://www.mediafire.com/?5o1hkuuwhn8hh1c
2. Rename it to emmc.bin, and copy it to C:\Program Files\maemo\flasher-3.5\
3. Make sure you also have your firmware bin file in that location too, for simplicity, rename it to fiasco
4. You should have 2 big bin files now in C:\Program Files\maemo\flasher-3.5\ fiasco.bin and emmc.bin
5. Click on Start on the search bar, type Maemo
6. You should see Maemo Flasher 3.5 with a cmd icon, run it.
7. Copy this command and paste it in the cmd window:
flasher-3.5 -F fiasco.bin -f
8. Hit Enter/Return and wait for completion
9. After it completes, copy this command and paste it in the cmd window:
flasher-3.5 -F emmc.bin -f -R
10. After it completes, your N900 should reboot, if it does, your alrighty super-duper, if it doesn't, paint it red and use it as a brick.