Reply
Thread Tools
Posts: 42 | Thanked: 2 times | Joined on Oct 2011
#1
hello

every time i try to reach my conversation it give me an internal error and its immediately close the conversation

i already made a flash to my phone !!
 
m750's Avatar
Posts: 249 | Thanked: 345 times | Joined on Aug 2010 @ Italy
#2
yes, but you don't even written what phone is. You are in the general section ...
__________________
maxcpu : change cpu's clock with a TAP!
savecpu : overheating control for overclocked n900.
shaketowake2 : Enable/Disable wake up/rest by shaking.
tilt2control : control mediaplayer by tilting your n900.
gpstracker-c : easy handle your gpstracker tk102.
pyOBD for maemo (OBD-II cars diagnostic)
 
Mike Fila's Avatar
Posts: 412 | Thanked: 480 times | Joined on Feb 2011 @ Bronx, NY
#3
did you restore your conversations from a backup? the problem is most likely in the backup. either restore an older backup or clear the conversations completly
 

The Following User Says Thank You to Mike Fila For This Useful Post:
Posts: 42 | Thanked: 2 times | Joined on Oct 2011
#4
sorry my phone is n900

and i did not restore my conversation from a backup my conversation box is clear now ! i made a reflash for the holl phone and just made a copy past to contact from my comp to my phone also i have now same prob to contact !

and just yesterday sudenly no viber when i touch the screen !
 
m750's Avatar
Posts: 249 | Thanked: 345 times | Joined on Aug 2010 @ Italy
#5
please, try to open a contact by pressing a key on the phisical keyboard: contact will be opened?
__________________
maxcpu : change cpu's clock with a TAP!
savecpu : overheating control for overclocked n900.
shaketowake2 : Enable/Disable wake up/rest by shaking.
tilt2control : control mediaplayer by tilting your n900.
gpstracker-c : easy handle your gpstracker tk102.
pyOBD for maemo (OBD-II cars diagnostic)
 
pusak gaoq's Avatar
Posts: 723 | Thanked: 519 times | Joined on Nov 2010 @ Kuching:Malaysia
#6
first of all no need to write with LARGER font next time....
second no need to make new thread for you new problem,one thread is enough.....failling to do so then you will be consider trolling and your problem will be ignore by member in this TMO....


ok let me ask you....
did you flash your fiasco images (combined) & eMMC (vanilla) as well???
for your info flash eMMC first then fiasco images for a clean device....

have your try re-flash your device again just to make sure you really done it correctly???
__________________
My Phone Evolution : Nokia 3650-Nokia 6600-Nokia 6630-Motorola Rizr-Sony P1i-Nokia E63-Nokia X3-Samsung E980-Iphone 2G-Sony W595-Nokia E71-Nokia 5800-Nokia N900-HTC Hero-Xperia Mini Pro
 
Mike Fila's Avatar
Posts: 412 | Thanked: 480 times | Joined on Feb 2011 @ Bronx, NY
#7
you can try opening conversations from the command line to see if it gives you errors

open terminal and type:

dbus-send --type=method_call --dest=com.nokia.HildonDesktop.AppMgr /com/nokia/HildonDesktop/AppMgr com.nokia.HildonDesktop.AppMgr.LaunchApplication string:rtcom-messaging-ui

then hit enter

but if your not sure about how you flashed the device ...flashing it again is prolly a good idea make sure you read the entire wiki before flashing it.


edited to remove code tags ..couldnt see all text in micro b

Last edited by Mike Fila; 2011-12-14 at 23:26.
 
Reply

Tags
big_font


 
Forum Jump


All times are GMT. The time now is 10:38.