Soon it shouldn't matter, as Pali updated ke-recv to automatically mount USB storage devices.

/Estel

Cheers, will wait with anticipation.

Curious if anyone else has this problem, when I try to move big files off of a USB drive to MyDocs with h-e-n I will get between 30 to 100 Mb moved and the drive will come unmounted, sometimes the N900 will even shut down. I am guessing it is an electrical power supply issue from getting the flash drive to send data so fast as well as writing to the internal flash.
Is there a way to limit data throughput rates when running a drive mounted with h-e-n to avoid these issues?

you have an old battery and it can't support high power demand.
voltage drop on internal resistance of battery limit the working time ( and charge voltage also ). i guess our battery have resistance above 500 mOhm ( for reference 50 mOhm a new one )
there is a thread on forum for resistance check.

Thanks, I am beginning to suspect that as I am having other problems too, though I have also suspected a short of some kind on the board causing the keypad LED for the return and arrow keys to run at low power when the battery is inserted. I hope to have a Mungen cover and solder together a double Scud to solve the issue if it is only battery related.

Dear guys,

need assistance on getting serial usb works. really need to used the serial usb in order to access the switch and routers..

Thanks in advanced.

_vibra smiaregs tsl2563 v4l2_int_device rtc_core leds_lp5523 led_class mmc_block omap_hsmmc mmc_core twl4030_wdt omap_wdt [last unloaded: wl12xx]
[39947.586425] [] (dump_stack+0x0/0x14) from [] (warn_slowpath+0x64/0x80)
[39947.586456] [] (warn_slowpath+0x0/0x80) from [] (musb_h_tx_flush_fifo+0x94/0xcc)
[39947.586486] r3:00000000 r2:c0349b67
[39947.586517] r6:d80ab100 r5:0000000a r4:0000000a
[39947.586517] [] (musb_h_tx_flush_fifo+0x0/0xcc) from [] (musb_cleanup_urb+0xc0/0x10c)
[39947.586547] [] (musb_cleanup_urb+0x0/0x10c) from [] (musb_urb_dequeue+0x1dc/0x248)
[39947.586578] [] (musb_urb_dequeue+0x0/0x248) from [] (unlink1+0x108/0x114)
[39947.586639] [] (unlink1+0x0/0x114) from [] (usb_hcd_unlink_urb+0x9c/0xf8)
[39947.586669] [] (usb_hcd_unlink_urb+0x0/0xf8) from [] (usb_kill_urb+0x84/0x14c)
[39947.586700] r7:cd5b3c00 r6:cd5b3c00 r5:cf0a6000 r4:00000000
[39947.586700] [] (usb_kill_urb+0x0/0x14c) from [] (usb_start_wait_urb+0x80/0x120)
[39947.586730] r6:00001388 r5:cf0a7e50 r4:00000000
[39947.586761] [] (usb_start_wait_urb+0x0/0x120) from [] (usb_control_msg+0xc4/0xe8)
[39947.586791] [] (usb_control_msg+0x0/0xe8) from [] (hub_port_init+0x3d8/0x634)
[39947.586822] [] (hub_port_init+0x0/0x634) from [] (hub_events+0x86c/0xe64)
[39947.586853] [] (hub_events+0x0/0xe64) from [] (hub_thread+0x30/0x19c)
[39947.586883] [] (hub_thread+0x0/0x19c) from [] (kthread+0x54/0x80)
[39947.586914] r6:00000000 r5:c01ce004 r4:00000000
[39947.586944] [] (kthread+0x0/0x80) from [] (do_exit+0x0/0x7bc)
[39947.586975] r5:00000000 r4:00000000
[39947.586975] ---[ end trace adbd6ed65c91e9be ]---
[39950.546813] usb 1-1: khubd timed out on ep0out len=0/0
[39956.750183] ------------[ cut here ]------------
[39956.750244] WARNING: at /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/musb/musb_host.c:128 musb_h_tx_flush_fifo+0x94/0xcc()
[39956.750244] Could not flush host TX0 fifo: csr: 000a
[39956.750274] Modules linked in: lirc_rx51 lirc_dev vfat fat sd_mod scsi_mod iphb rfcomm panic_info_buff sco l2cap ext3 jbd omaplfb pvrsrvkm bridgedriver ipv6 g_file_storage uinput board_rx51_camera et8ek8 omap_previewer_hack omap34xxcam_mod isp_mod iovmm videobuf_dma_sg videobuf_core omap3_iommu iommu2 iommu dspbridge ssi_mcsaab_imp phonet cmt_speech joydev smc91x mii omap_ssi hci_h4p nokia_av mac80211 crc7 tsc2005 bluetooth fmtx_si4713 ad5820 videodev v4l1_compat adp1653 smia_sensor compat_ioctl32 lis302dl rtc_twl4030 leds_twl4030_vibra smiaregs tsl2563 v4l2_int_device rtc_core leds_lp5523 led_class mmc_block omap_hsmmc mmc_core twl4030_wdt omap_wdt [last unloaded: wl12xx]
[39956.750518] [] (dump_stack+0x0/0x14) from [] (warn_slowpath+0x64/0x80)
[39956.750579] [] (warn_slowpath+0x0/0x80) from [] (musb_h_tx_flush_fifo+0x94/0xcc)
[39956.750610] r3:00000000 r2:c0349b67
[39956.750610] r6:d80ab100 r5:0000000a r4:0000000a
[39956.750640] [] (musb_h_tx_flush_fifo+0x0/0xcc) from [] (musb_cleanup_urb+0xc0/0x10c)
[39956.750671] [] (musb_cleanup_urb+0x0/0x10c) from [] (musb_urb_dequeue+0x1dc/0x248)
[39956.750701] [] (musb_urb_dequeue+0x0/0x248) from [] (unlink1+0x108/0x114)
[39956.750732] [] (unlink1+0x0/0x114) from [] (usb_hcd_unlink_urb+0x9c/0xf8)
[39956.750762] [] (usb_hcd_unlink_urb+0x0/0xf8) from [] (usb_kill_urb+0x84/0x14c)
[39956.750793] r7:cd5b3c00 r6:cd5b3c00 r5:cf0a6000 r4:00000000
[39956.750823] [] (usb_kill_urb+0x0/0x14c) from [] (usb_start_wait_urb+0x80/0x120)
[39956.750854] r6:00001388 r5:cf0a7e50 r4:00000000
[39956.750854] [] (usb_start_wait_urb+0x0/0x120) from [] (usb_control_msg+0xc4/0xe8)
[39956.750915] [] (usb_control_msg+0x0/0xe8) from [] (hub_port_init+0x3d8/0x634)
[39956.750946] [] (hub_port_init+0x0/0x634) from [] (hub_events+0x86c/0xe64)
[39956.750976] [] (hub_events+0x0/0xe64) from [] (hub_thread+0x30/0x19c)
[39956.750976] [] (hub_thread+0x0/0x19c) from [] (kthread+0x54/0x80)
[39956.751007] r6:00000000 r5:c01ce004 r4:00000000
[39956.751037] [] (kthread+0x0/0x80) from [] (do_exit+0x0/0x7bc)
[39956.751068] r5:00000000 r4:00000000
[39956.751098] ---[ end trace adbd6ed65c91e9be ]---
[39959.700256] usb 1-1: khubd timed out on ep0out len=0/0
[39959.908233] usb 1-1: device not accepting address 53, error -110
[39959.970672] Forced hostmode error: a high-speed device attached but not high-speed mode selected
[39960.033203] usb 1-1: new high speed USB device using musb_hdrc and address 54
[39966.031433] ------------[ cut here ]------------
[39966.031463] WARNING: at /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/musb/musb_host.c:128 musb_h_tx_flush_fifo+0x94/0xcc()
[39966.031494] Could not flush host TX0 fifo: csr: 000a
[39966.031494] Modules linked in: lirc_rx51 lirc_dev vfat fat sd_mod scsi_mod iphb rfcomm panic_info_buff sco l2cap ext3 jbd omaplfb pvrsrvkm bridgedriver ipv6 g_file_storage uinput board_rx51_camera et8ek8 omap_previewer_hack omap34xxcam_mod isp_mod iovmm videobuf_dma_sg videobuf_core omap3_iommu iommu2 iommu dspbridge ssi_mcsaab_imp phonet cmt_speech joydev smc91x mii omap_ssi hci_h4p nokia_av mac80211 crc7 tsc2005 bluetooth fmtx_si4713 ad5820 videodev v4l1_compat adp1653 smia_sensor compat_ioctl32 lis302dl rtc_twl4030 leds_twl4030_vibra smiaregs tsl2563 v4l2_int_device rtc_core leds_lp5523 led_class mmc_block omap_hsmmc mmc_core twl4030_wdt omap_wdt [last unloaded: wl12xx]
[39966.031768] [] (dump_stack+0x0/0x14) from [] (warn_slowpath+0x64/0x80)
[39966.031799] [] (warn_slowpath+0x0/0x80) from [] (musb_h_tx_flush_fifo+0x94/0xcc)
[39966.031829] r3:00000000 r2:c0349b67
[39966.031860] r6:d80ab100 r5:0000000a r4:0000000a
[39966.031860] [] (musb_h_tx_flush_fifo+0x0/0xcc) from [] (musb_cleanup_urb+0xc0/0x10c)
[39966.031890] [] (musb_cleanup_urb+0x0/0x10c) from [] (musb_urb_dequeue+0x1dc/0x248)
[39966.031921] [] (musb_urb_dequeue+0x0/0x248) from [] (unlink1+0x108/0x114)
[39966.031951] [] (unlink1+0x0/0x114) from [] (usb_hcd_unlink_urb+0x9c/0xf8)
[39966.031982] [] (usb_hcd_unlink_urb+0x0/0xf8) from [] (usb_kill_urb+0x84/0x14c)
[39966.032012] r7:cd5b3c00 r6:cd5b3c00 r5:cf0a6000 r4:00000000
[39966.032043] [] (usb_kill_urb+0x0/0x14c) from [] (usb_start_wait_urb+0x80/0x120)
[39966.032073] r6:00001388 r5:cf0a7e50 r4:00000000
[39966.032104] [] (usb_start_wait_urb+0x0/0x120) from [] (usb_control_msg+0xc4/0xe8)
[39966.032135] [] (usb_control_msg+0x0/0xe8) from [] (hub_port_init+0x3d8/0x634)
[39966.032165] [] (hub_port_init+0x0/0x634) from [] (hub_events+0x86c/0xe64)
[39966.032196] [] (hub_events+0x0/0xe64) from [] (hub_thread+0x30/0x19c)
[39966.032226] [] (hub_thread+0x0/0x19c) from [] (kthread+0x54/0x80)
[39966.032257] r6:00000000 r5:c01ce004 r4:00000000
[39966.032257] [] (kthread+0x0/0x80) from [] (do_exit+0x0/0x7bc)
[39966.032287] r5:00000000 r4:00000000
[39966.032318] ---[ end trace adbd6ed65c91e9be ]---
[39968.957916] usb 1-1: khubd timed out on ep0out len=0/0
[39975.164245] ------------[ cut here ]------------
[39975.164276] WARNING: at /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/musb/musb_host.c:128 musb_h_tx_flush_fifo+0x94/0xcc()
[39975.164306] Could not flush host TX0 fifo: csr: 000a
[39975.164306] Modules linked in: lirc_rx51 lirc_dev vfat fat sd_mod scsi_mod iphb rfcomm panic_info_buff sco l2cap ext3 jbd omaplfb pvrsrvkm bridgedriver ipv6 g_file_storage uinput board_rx51_camera et8ek8 omap_previewer_hack omap34xxcam_mod isp_mod iovmm videobuf_dma_sg videobuf_core omap3_iommu iommu2 iommu dspbridge ssi_mcsaab_imp phonet cmt_speech joydev smc91x mii omap_ssi hci_h4p nokia_av mac80211 crc7 tsc2005 bluetooth fmtx_si4713 ad5820 videodev v4l1_compat adp1653 smia_sensor compat_ioctl32 lis302dl rtc_twl4030 leds_twl4030_vibra smiaregs tsl2563 v4l2_int_device rtc_core leds_lp5523 led_class mmc_block omap_hsmmc mmc_core twl4030_wdt omap_wdt [last unloaded: wl12xx]
[39975.164581] [] (dump_stack+0x0/0x14) from [] (warn_slowpath+0x64/0x80)
[39975.164611] [] (warn_slowpath+0x0/0x80) from [] (musb_h_tx_flush_fifo+0x94/0xcc)
[39975.164642] r3:00000000 r2:c0349b67
[39975.164672] r6:d80ab100 r5:0000000a r4:0000000a
[39975.164672] [] (musb_h_tx_flush_fifo+0x0/0xcc) from [] (musb_cleanup_urb+0xc0/0x10c)
[39975.164703] [] (musb_cleanup_urb+0x0/0x10c) from [] (musb_urb_dequeue+0x1dc/0x248)
[39975.164733] [] (musb_urb_dequeue+0x0/0x248) from [] (unlink1+0x108/0x114)
[39975.164764] [] (unlink1+0x0/0x114) from [] (usb_hcd_unlink_urb+0x9c/0xf8)
[39975.164794] [] (usb_hcd_unlink_urb+0x0/0xf8) from [] (usb_kill_urb+0x84/0x14c)
[39975.164825] r7:cd5b3c00 r6:cd5b3c00 r5:cf0a6000 r4:00000000
[39975.164855] [] (usb_kill_urb+0x0/0x14c) from [] (usb_start_wait_urb+0x80/0x120)
[39975.164886] r6:00001388 r5:cf0a7e50 r4:00000000
[39975.164916] [] (usb_start_wait_urb+0x0/0x120) from [] (usb_control_msg+0xc4/0xe8)
[39975.164947] [] (usb_control_msg+0x0/0xe8) from [] (hub_port_init+0x3d8/0x634)
[39975.164978] [] (hub_port_init+0x0/0x634) from [] (hub_events+0x86c/0xe64)
[39975.165008] [] (hub_events+0x0/0xe64) from [] (hub_thread+0x30/0x19c)
[39975.165039] [] (hub_thread+0x0/0x19c) from [] (kthread+0x54/0x80)
[39975.165069] r6:00000000 r5:c01ce004 r4:00000000
[39975.165069] [] (kthread+0x0/0x80) from [] (do_exit+0x0/0x7bc)
[39975.165100] r5:00000000 r4:00000000
[39975.165130] ---[ end trace adbd6ed65c91e9be ]---
[39978.090606] usb 1-1: khubd timed out on ep0out len=0/0
[39978.298858] usb 1-1: device not accepting address 54, error -110
[39978.298919] hub 1-0:1.0: unable to enumerate USB device on port 1
[39978.298950] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[39978.298980] hub 1-0:1.0: port 1 enable change, status 00000501
[39980.298797] hub 1-0:1.0: hub_suspend
[39980.298858] usb usb1: bus auto-suspend
[39980.298858] musb_bus_suspend 2266: trying to suspend as a_host is_active=1
[39980.298889] usb usb1: bus suspend fail, err -16
[39980.298889] hub 1-0:1.0: hub_resume
[39980.298950] hub 1-0:1.0: port 1: status 0501 change 0000
[39980.298980] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[39980.299011] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[39980.361328] Forced hostmode error: a high-speed device attached but not high-speed mode selected
[39980.423828] usb 1-1: new high speed USB device using musb_hdrc and address 55
[39985.423828] usb 1-1: khubd timed out on ep0in len=0/64
[39990.423797] usb 1-1: khubd timed out on ep0in len=0/64
[39995.423797] usb 1-1: khubd timed out on ep0in len=0/64
[39995.486297] Forced hostmode error: a high-speed device attached but not high-speed mode selected
[39995.548828] usb 1-1: device descriptor read/64, error -110
[40000.658203] usb 1-1: khubd timed out on ep0in len=0/64
[40005.658172] usb 1-1: khubd timed out on ep0in len=0/64
[40010.658203] usb 1-1: khubd timed out on ep0in len=0/64
[40010.720672] Forced hostmode error: a high-speed device attached but not high-speed mode selected
[40010.783203] usb 1-1: device descriptor read/64, error -110
[40010.955047] Forced hostmode error: a high-speed device attached but not high-speed mode selected
[40011.017578] usb 1-1: new high speed USB device using musb_hdrc and address 56
[40016.017517] usb 1-1: khubd timed out on ep0in len=0/64
[40020.744140] slide (GPIO 71) is now open
[40021.017456] usb 1-1: khubd timed out on ep0in len=0/64
[40026.017547] usb 1-1: khubd timed out on ep0in len=0/64
[40026.080078] Forced hostmode error: a high-speed device attached but not high-speed mode selected
[40026.142608] usb 1-1: device descriptor read/64, error -110
[40031.251922] usb 1-1: khubd timed out on ep0in len=0/64
[40036.251953] usb 1-1: khubd timed out on ep0in len=0/64
[40039.916015] slide (GPIO 71) is now closed
[40041.252044] usb 1-1: khubd timed out on ep0in len=0/64
[40041.314422] Forced hostmode error: a high-speed device attached but not high-speed mode selected
[40041.376953] usb 1-1: device descriptor read/64, error -110
[40041.548797] Forced hostmode error: a high-speed device attached but not high-speed mode selected
[40041.616149] usb 1-1: new high speed USB device using musb_hdrc and address 57
[40047.609527] ------------[ cut here ]------------
[40047.609588] WARNING: at /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/musb/musb_host.c:128 musb_h_tx_flush_fifo+0x94/0xcc()
[40047.609588] Could not flush host TX0 fifo: csr: 000a
[40047.609619] Modules linked in: lirc_rx51 lirc_dev vfat fat sd_mod scsi_mod iphb rfcomm panic_info_buff sco l2cap ext3 jbd omaplfb pvrsrvkm bridgedriver ipv6 g_file_storage uinput board_rx51_camera et8ek8 omap_previewer_hack omap34xxcam_mod isp_mod iovmm videobuf_dma_sg videobuf_core omap3_iommu iommu2 iommu dspbridge ssi_mcsaab_imp phonet cmt_speech joydev smc91x mii omap_ssi hci_h4p nokia_av mac80211 crc7 tsc2005 bluetooth fmtx_si4713 ad5820 videodev v4l1_compat adp1653 smia_sensor compat_ioctl32 lis302dl rtc_twl4030 leds_twl4030_vibra smiaregs tsl2563 v4l2_int_device rtc_core leds_lp5523 led_class mmc_block omap_hsmmc mmc_core twl4030_wdt omap_wdt [last unloaded: wl12xx]
[40047.609863] [] (dump_stack+0x0/0x14) from [] (warn_slowpath+0x64/0x80)
[40047.609924] [] (warn_slowpath+0x0/0x80) from [] (musb_h_tx_flush_fifo+0x94/0xcc)
[40047.609954] r3:00000000 r2:c0349b67
[40047.609954] r6:d80ab100 r5:0000000a r4:0000000a
[40047.609985] [] (musb_h_tx_flush_fifo+0x0/0xcc) from [] (musb_cleanup_urb+0xc0/0x10c)
[40047.610015] [] (musb_cleanup_urb+0x0/0x10c) from [] (musb_urb_dequeue+0x1dc/0x248)
[40047.610046] [] (musb_urb_dequeue+0x0/0x248) from [] (unlink1+0x108/0x114)
[40047.610076] [] (unlink1+0x0/0x114) from [] (usb_hcd_unlink_urb+0x9c/0xf8)
[40047.610107] [] (usb_hcd_unlink_urb+0x0/0xf8) from [] (usb_kill_urb+0x84/0x14c)
[40047.610137] r7:c6a67500 r6:c6a67500 r5:cf0a6000 r4:00000000
[40047.610168] [] (usb_kill_urb+0x0/0x14c) from [] (usb_start_wait_urb+0x80/0x120)
[40047.610198] r6:00001388 r5:cf0a7e50 r4:00000000
[40047.610198] [] (usb_start_wait_urb+0x0/0x120) from [] (usb_control_msg+0xc4/0xe8)
[40047.610229] [] (usb_control_msg+0x0/0xe8) from [] (hub_port_init+0x3d8/0x634)
[40047.610260] [] (hub_port_init+0x0/0x634) from [] (hub_events+0x86c/0xe64)
[40047.610290] [] (hub_events+0x0/0xe64) from [] (hub_thread+0x30/0x19c)
[40047.610321] [] (hub_thread+0x0/0x19c) from [] (kthread+0x54/0x80)
[40047.610351] r6:00000000 r5:c01ce004 r4:00000000
[40047.610382] [] (kthread+0x0/0x80) from [] (do_exit+0x0/0x7bc)
[40047.610412] r5:00000000 r4:00000000
[40047.610412] ---[ end trace adbd6ed65c91e9be ]---
[40051.206695] usb 1-1: khubd timed out on ep0out len=0/0

i have the latest cssu testing, kp49/overclocked, and hen installed. usb 2.0 flash drive is successfully mounted but when i try to copy or move a 300mb file to the flash drive, it says not enough memory in target drive. i am able to move/copy pictures. what's the problem?

thanks in advance!

***SOLVED***
Just wanna share my experience:

I don't know if somebody solved this problem before:
"UNABLE TO CONNECT ,FILE SYSTEM NOT AVAILABLE"
But from my experience I can see that this is not a problem that avoid from using H-E-N.
For those having this error follow this steps::

1-Unplug any USB cable from the phone.
2-Open h-e-n and choose the wanted speed.
3-Click on **VBUS BOOST ON** and wait for 10 sec.
4-Connect the USB flash driver tho the USB cable. Then plug the latter into the phone.Wait for 10 sec.
5- click on **ENUMERATE** Wait for 10 sec
6-then click on **MOUNT**]

And here you go

Sadly, this doesn't seem to work for me.
The only thing is it kinda goes to almost overheating the USB.


Generally I need help getting the hostmode working, I can't get the usb light to flash at all; mostly no power goes through the cable.

I am using power kernel v49, I have also tried with v46, v47, v50, and I can't get it working.

What are the other dependencies? (Maybe I'm missing some)

Any help is aprreciated!

Don't You think it's a little confusing pair of statements?