Reply
Thread Tools
dr_frost_dk's Avatar
Posts: 1,457 | Thanked: 2,485 times | Joined on Oct 2010 @ Denmark, not far from redkarma
#81
guylhem thanks for the link, ordered some to my collection

and there is a fuse in the USB, i know i blew mine when i was experimenting with an DIY battery powered charger and it was late at night and i did not check the polarity of the USB plug, i did not find a replacement fuse so i opted to use 2 strands of wire and soldered it in where i took the fuse out, and my USB have been working fine since then, but if i should experiment again i will check my connections 5 times....
 
Posts: 40 | Thanked: 25 times | Joined on Sep 2011
#82
I think your fuse is F5300 (2A) as mentionned in page 4 of the schematics. But I don't see if it is before or after J2061.

Any 2A SMD fuse should do (it may not be pretty, like too small or too big, but I don't have the part list so I can't check the reference)

$5 on ebay for 10:
http://www.ebay.com/itm/10pcs-Little...item4ab691b4e8
 

The Following User Says Thank You to guylhem For This Useful Post:
dr_frost_dk's Avatar
Posts: 1,457 | Thanked: 2,485 times | Joined on Oct 2010 @ Denmark, not far from redkarma
#83
Those are too big, the problem i had was trying to find a small enough fuse, but it works now, nowhere near ideal, believe me i know, but it works.

And yes it was F5300
 
Posts: 14 | Thanked: 3 times | Joined on Oct 2011
#84
i'm interested in this. would love an update soon
 
Posts: 438 | Thanked: 189 times | Joined on Oct 2009 @ spain-aragon-zaragoza
#85
Good job but battery for it?? 3000mah?? for example.

The small battery n900 is a big problem.

With gamming or wifi scaning faircrack or other things in two hours and little , batery empty

Good cover case but , battery is the problem forever.

The mugen is the best capacity but very expensive

Last edited by samipower; 2012-05-07 at 19:08.
 
dr_frost_dk's Avatar
Posts: 1,457 | Thanked: 2,485 times | Joined on Oct 2010 @ Denmark, not far from redkarma
#86
Originally Posted by samipower View Post
Good job but battery for it?? 3000mah?? for example.

The small battery n900 is a big problem.

With gamming or wifi scaning faircrack or other things in two hours and little , batery empty

Good cover case but , battery is the problem forever.

The mugen is the best capacity but very expensive
NO the mugen is not the best, not even by a little bit, of course if you are thinking about the best capacity that you can buy then yes it is the best, but since i tested it i can say it is pure cr*p, really disappointing mAh (just over 2200mAh not even close to 2400mAh) and build quality is very questionable considering the HUGE price
 
Estel's Avatar
Posts: 4,941 | Thanked: 8,234 times | Joined on Mar 2011
#87
Originally Posted by samipower View Post
Good job but battery for it?? 3000mah?? for example.
I Think You're not aware of:
http://talk.maemo.org/showthread.php?t=65568
---

As for update - I'm quite busy recently, but slowly going ahead. I've received first, "testing" aluminum (not the one that will make final thing - current one is weaker and cheaper, just for testing purposes), but my Chinese CNC step motor driver - something like that:
http://www.aliexpress.com/product-gs...olesalers.html

...just burned out. No big deal, as I've expected it to happen (due to experience gained while building machine, I know that they're just wrong in design). I've immediately ordered self-made (by other DIY CNC user) *proper* driver board, that are known to work very well, and it should arrive soon.

I also promise to post some video/photos of machine working with new driver

/Estel
__________________
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
 

The Following 9 Users Say Thank You to Estel For This Useful Post:
Posts: 837 | Thanked: 1,175 times | Joined on May 2010
#88
Do you think I could get a copy of your 3D model/drawings? I'm a machinist myself, and could probably make my own(I've got a real CNC mill at home, and access to a major production machine at work, plus $15K in software I can use in my off-hours.)
Also, I may be able to help - let me know.
__________________
My projects: BackupMenu - OS Backup & restore | Video: Flashing your n900(LiveCD)
My devices: N770 + 8GB SD card soldered internally, N900 with 8GB SD card + Custom OC(125-950 typically).
OC freqs: 0:22,90 125:22,90 250:28,180 500:30,360 550:32,400 600:34,430 700:39,430 750:41,430 805:45,430 850:47,500 900:50,500 950:54,500 1000:58,500 1100:67,520 1150:71,520
 

The Following 12 Users Say Thank You to RobbieThe1st For This Useful Post:
Posts: 6 | Thanked: 2 times | Joined on Feb 2011
#89
Awesome!

I'm in, meaning: I'd also be interested in buying one.
 
jutley's Avatar
Posts: 176 | Thanked: 67 times | Joined on Feb 2009 @ Mars
#90
Have you ever hear of the term SHUT UP AND TAKE MY MONEY.
__________________
Nokia N900 64gb
CSSU Testing Latest
Kernel Power KP50 1.15Ghz Stable (but very hot)
Powered by blue dream


Nokia N810 32gb
CSSU Stable Latest
Telescope
Turbo Kernel
 
Reply

Tags
antenna, backcover, external, gangam_style, mugen cover, n900 body, neo900

Thread Tools

 
Forum Jump


All times are GMT. The time now is 04:41.