[Announce] Cleven - an aircrack gui - Page 59 - maemo.org

Active Topics

Modest mail does not connect (9)
to OS2008 / Maemo 4 / Chinook - Diablo by Addison - 15 mins ago
[ANN] Cyclotron - CLI tools to cycle between app windows (86)
to MeeGo / Harmattan by tigas - 26 mins ago
Arch Linux ARM on N900 (428)
to Alternatives by sLumPia - 56 mins ago
PreOrder jolla device? (233)
to Buy & Sell by Lumiaman - 59 mins ago
Best encoding for n8x0 as well as for film for preservation purposes... (1)
to OS2008 / Maemo 4 / Chinook - Diablo by Addison - 1 hr, 7 mins ago
I'm looking for a nokia n950 (0)
to Buy & Sell by nikolls89 - 1 hr, 15 mins ago
Problem with shutdown/reboot N900 (kernel-power) (39)
to Maemo 5 / Fremantle by handaxe - 1 hr, 18 mins ago
DNA/Jolla Hangout Live, in Finnish (23)
to Sailfish by onethreealpha - 1 hr, 39 mins ago
Wts 950 (15)
to Buy & Sell by nikolls89 - 1 hr, 41 mins ago
who still wants a silver N950? (78)
to Nokia N9 / N950 by nikolls89 - 1 hr, 54 mins ago
#JollaLoveDay - 20th May - device announcement (467)
to Sailfish by onethreealpha - 2 hrs, 19 mins ago
[HOWTO] Comprehensive Firmware Flashing Guide for N9 (802)
to Nokia N9 / N950 by panorton - 3 hrs, 5 mins ago
more...

Page 59 of 83

Thread Tools

Search this Thread

rayon	05-01-2012 , 06:51 AM
Posts: 2 \| Thanked: 0 times \| Joined on May 2012	#581

Originally Posted by g0r

If you recently upgraded your kp to 50 latest then you have to upgrade the injection drivers to be compatible with the new kernel power. Get the new injection drivers in the same place here
Also you can read few posts back about cleven and compatibility with kp50.

Hello,

I copied the drivers provided from http://david.gnedt.eu/blog/wl1251/ to /opt/cleven/compat-wireless-v1. I could load them but I can't set it to monitor mode through cleven interface (I can do it manually). But still, I can't scan for network.

So I read few post back and I found the following solution :
http://talk.maemo.org/showpost.php?p...&postcount=541

I tried it but it doesn't work I have the same symptom (can't set the driver to monitor mode through the interface and I can't scan for network).

Regards,

Quote & Reply |

	Saturn	05-01-2012 , 06:54 AM
	Posts: 1,565 \| Thanked: 1,873 times \| Joined on Mar 2007 @ UNKLE's Never Never Land	#582

Originally Posted by rayon

Hello,

I have two issues after installing cleven 2.5.2 :
- I can't scan for network after setting monitor mode and loading injection driver ;
- I have not the reaver/wps button on the interface whereas I have reaver and walsh installed.

1) When I click on "scan" button I have the following error :

PHP Code:

ERROR: Cannot scan for available networks. The drivers or the interface are not to the correct state. Please configure them from the available menu option.

By looking loaded modules I can't see wl1251. I see wl12xx instead. So I launched load.sh script from /opt/cleven (with -v2 switch) and I can see the right driver from cleven loaded. But, I can't set this driver to monitor mode, iwconfig command show me managed mode on wifi interface (wlan0).

2) I installed reaver and walsh and I can use them but cleven interface didn't show the reaver or wps button.

PHP Code:

$ uname -a Linux Nokia-N900 2.6.28.10-power50 #1 PREEMPT Sun Mar 18 20:10:56 EET 2012 armv7l GNU/Linux $ dpkg -l |grep cleven ii cleven 2.5-2 Cleven is a user interface of aircrack-ng and reaver for the N900.

Regards,

Can you run the app from the xterm (as user) and post if you see anything strange?

How did you install reaver?

__________________
Packages: elGR Locale, SMSCON Editor, Swappolube, CSSU Features Configuration, Snuggle, YAMAS, Cleven
Garage: SMSCON, Swappolube, CSSU Features Configuration, Snuggle
Wiki: SMSCON, SMSCON Editor, Swappolube, CSSU Features Configuration, Cleven

Quote & Reply |

The Following User Says Thank You to Saturn For This Useful Post:
rayon

	Saturn	05-01-2012 , 06:56 AM
	Posts: 1,565 \| Thanked: 1,873 times \| Joined on Mar 2007 @ UNKLE's Never Never Land	#583

Originally Posted by rayon

Hello,

I copied the drivers provided from http://david.gnedt.eu/blog/wl1251/ to /opt/cleven/compat-wireless-v1. I could load them but I can't set it to monitor mode through cleven interface (I can do it manually). But still, I can't scan for network.

So I read few post back and I found the following solution :
http://talk.maemo.org/showpost.php?p...&postcount=541

I tried it but it doesn't work I have the same symptom (can't set the driver to monitor mode through the interface and I can't scan for network).

Regards,

If you have done any of the above it is best you uninstall cleven and then re-install.

None of those are needed for the devel version you are using.

Quote & Reply |

g0r	05-01-2012 , 07:02 AM
Posts: 104 \| Thanked: 85 times \| Joined on Jun 2011 @ Unknown	#584

Originally Posted by rayon

Hello,

I copied the drivers provided from http://david.gnedt.eu/blog/wl1251/ to /opt/cleven/compat-wireless-v1. I could load them but I can't set it to monitor mode through cleven interface (I can do it manually). But still, I can't scan for network.

So I read few post back and I found the following solution :
http://talk.maemo.org/showpost.php?p...&postcount=541

I tried it but it doesn't work I have the same symptom (can't set the driver to monitor mode through the interface and I can't scan for network).

Regards,

follow david's instruction (read me file) on his page still old but pretty same for new injection driver, worked for me and other people.

Quote & Reply |

g0r	05-01-2012 , 07:15 AM
Posts: 104 \| Thanked: 85 times \| Joined on Jun 2011 @ Unknown	#585

Originally Posted by Saturn

If you have done any of the above it is best you uninstall cleven and then re-install.

None of those are needed for the devel version you are using.

Saturn please correct me if I am wrong but that will not work as he is on kp50 with old injection drivers installed in wl1251-maemo folder so if he was using kp49 then yes with the latest version of cleven that will work but what he did was just copied the new injection drivers to opt/cleven so he is on kp50 with old injection drviers installed in wl1251-maemo and new injection drivers in opt/cleven how will that work?

Quote & Reply |

	Saturn	05-01-2012 , 08:46 AM
	Posts: 1,565 \| Thanked: 1,873 times \| Joined on Mar 2007 @ UNKLE's Never Never Land	#586

Originally Posted by g0r

Saturn please correct me if I am wrong but that will not work as he is on kp50 with old injection drivers installed in wl1251-maemo folder so if he was using kp49 then yes with the latest version of cleven that will work but what he did was just copied the new injection drivers to opt/cleven so he is on kp50 with old injection drviers installed in wl1251-maemo and new injection drivers in opt/cleven how will that work?

Hi,

as you will notice in the changelog (posted in this thread and here: http://maemo.org/packages/view/cleven/) the last version in devel provides support for KP50 too.

This release of Cleven has both versions of the drivers (new and old) included and the one to be used is automatically selected depending on the KP used.

hope it helps

Quote & Reply |

The Following User Says Thank You to Saturn For This Useful Post:
g0r

g0r	05-01-2012 , 09:23 AM
Posts: 104 \| Thanked: 85 times \| Joined on Jun 2011 @ Unknown	#587

Originally Posted by Saturn

Hi,

as you will notice in the changelog (posted in this thread and here: http://maemo.org/packages/view/cleven/) the last version in devel provides support for KP50 too.

This release of Cleven has both versions of the drivers (new and old) included and the one to be used is automatically selected depending on the KP used.

hope it helps

Sorry Saturn I might be wrong I do understand that the latest version of cleven works with kp49 and old injection drivers and kp50 with new injection drivers installed but what I understand that rayon has is (a mix of) kp50 with old wl1251 injection drivers and this is why he gets the error. As you can see from his previous post he only copied the new drivers in opt/cleven/compat-wireless-v1

Quote & Reply |

	Saturn	05-01-2012 , 11:41 AM
	Posts: 1,565 \| Thanked: 1,873 times \| Joined on Mar 2007 @ UNKLE's Never Never Land	#588

Originally Posted by g0r

Sorry Saturn I might be wrong I do understand that the latest version of cleven works with kp49 and old injection drivers and kp50 with new injection drivers installed but what I understand that rayon has is (a mix of) kp50 with old wl1251 injection drivers and this is why he gets the error. As you can see from his previous post he only copied the new drivers in opt/cleven/compat-wireless-v1

that's the reason i asked him to uninstall and install again cleven and not do again those steps..

Quote & Reply |

The Following 2 Users Say Thank You to Saturn For This Useful Post:
g0r, Sourav.dubey

	Saturn	05-01-2012 , 01:32 PM
	Posts: 1,565 \| Thanked: 1,873 times \| Joined on Mar 2007 @ UNKLE's Never Never Land	#589

Hi this is part from a mail Rayon sent me noting he is not able to post here:

Hello,

it works I remove it and purge it. Now I can scan for network. But I've an issue with reaver. I can launch it with the
command line and it works fine. But through cleven capture interface I can't see reaver/wps button.

I installed reaver by downloading this package : http://forums.internettablettalk.com...5&postcount=60

And I copied binaries under /bin and reaver.db in /home/user/.reaver which is linked to /etc/reaver.

Regards,

Add reaver, reaven.db and wash binaries in /home/user/.reaver/ and re-start Cleven for the links to be created.
This release of Cleven works for reaver versions > 100.
if you cannot compile them yourself choose something newer than what you have. e.g. http://forums.internettablettalk.com...7&postcount=94

Last edited by Saturn; 05-01-2012 at 01:38 PM.

Quote & Reply |

The Following User Says Thank You to Saturn For This Useful Post:
g0r

	Saturn	05-06-2012 , 11:43 AM
	Posts: 1,565 \| Thanked: 1,873 times \| Joined on Mar 2007 @ UNKLE's Never Never Land	#590

Release of cleven 3.0-1 in extras-devel

This version (should be available in few minutes) depends on freemangordon's package of the bleeding edge drivers. Since those depend on the kernel-power package, installing cleven will most probably upgrade your kernel to the latest in the repository you have enabled.

To casual users: Please allow people with more experience to test it first before you upgrade. I have not tested it with all possible combinations and the major changes might break your system. Recommended is to use the version in stable repository or if you feel adventurous the testing repository.

Changes:

NEW: Added dependency to linux-backports-modules-power package.
NEW: removed all binaries of the bleeding edge wireless drivers.
CHANGE: Modified load.sh script for the new drivers selection.

WARNING: This version will work only with Kernel-Power version 50 and above.

Quote & Reply |

The Following 10 Users Say Thank You to Saturn For This Useful Post:
D@vIcHoJD, Estel, freemangordon, g0r, imo, ivgalvez, king Ralphred, q6600, sifo, Sourav.dubey

Page 59 of 83

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search