important stuf???

i mean kernels, CSSU, thumb,......etc

i did everything but wen i take pic and check in gallery its " unsupported file format"

wen taking video it freezes on the 1st frame.

i have cssu T, power kernel 51

y is this happening????

please somebody help

You might have taken the picture in raw format, which is not supported by Gallery. If that's the case, use Raw Viewer instead.

i tried but that does not work, and thats for the photo, what about the video getting stuck on first frame???

Somebody anybody help!!!!

Ok im very happy that I can record in 720p but there is a problem. It's said that with the 'dsp' profile I will be able to capture 30fps but actually they are 21-22 max with ANY overclock (550Mhz-17fps,600-20fps,720-20-21fps,805&850&900-22 fps). BUT I see that its capturing 10 MBps which is very much for me and I want to alter some settings like exchanging MBps for fps. Without cssu @ res848x480 it captured around 3,5 MBps so I would like to capture 4-5 MBps & 30 fps. It would be MUCH better

Hi Freemangordon,

I have a tiny but annoying bug to report, not sure is it only me or a real bug,

when selected DVD 16:9 ratio, the first video recording after a fresh start of camera-ui will result in a 25 fps video, but second video onwards it records at 30 fps. I can reproduce this every time with,

DSP profile with and without SR, also with locked 805:600 freqs with adequate voltages

To reproduce,

start camera-ui
select dvd 16:9 as video quality
reboot (if you had done recording previously after last reboot)
start camera ui
start recording for a few secons/ minutes
stop recording
start recording again
and analyze the frame rates of both files, 1st one would be at 25 fps. 2nd at 30 fps.

Thanks for all your hard work,

//nkirk

Hello I have latest maemo cssu testing and all .debs first post installed.
Maemo pr 1.3.1 kernel v51r1 latest, and in my dsp profile


usr/share/kernel-power-settings/dsp

# DO NOT EDIT THIS FILE - CREATE A COPY OF IT FOR CUSTOMIZATION
# minimum frequency to use
MINFREQ=250
# maximum frequency to use
MAXFREQ=805
# list of frequency configurations: each "frequency:volt,dsprate"
FREQS="0:30,90 125:30,90 250:38,180 500:48,360 550:54,400 600:60,430 720:60,520 805:60,600 850:60,600 900:60,600 950:60,600 1000:60,600 1100:72,600 1150:72,600"
SMARTREFLEX_VDD1=1
SMARTREFLEX_VDD2=1
GOVERNOR=ondemand
UP_THRESHOLD=95
SAMPLING_RATE=300000
IGNORE_NICE_LOAD=0
POWERSAVE_BIAS=0


Questions:

I have a question in a numbers for example 1150:72,600"

1150mhz cpu max ,72 min cpu?, 600 dsp? ,
I thought that min are 125 mhz for cpu.

Other question:

If with Qcpuqfreq I put 1150mhz , dsp speed is a default ok?
(I did not write the line command in x-terminal kernel-config load dsp)

And If I write kernel-config load dsp ,

and in theory now my speed are : 805:60,600 805cpu and 600dsp ?

all right?

If you want to record properly just lock the frequency in xterminal just type root
kernel-config lock 900
and to unlock kernel-config unlock

I tried for example to execute kernel-config load dps and record with hd 16:9 and ok , but If you increase speed 805 to 850 or higher camera freeze , you must be modify cpu max in dsp profile I think,

I tried with 1150mhz max in dsp profile but reboot when I start to videorecorder.

It is funny , try and try max freqs supported without reboots ja ja ja.

For example 900mhz cpu 600dsp , stable but with some rare things, you touch record and nothing and not record, try again and now works and you can see seconds.... or when you pause and stop the video, not save, freeze camera app,. sometimes yes or sometimes not.

I tried with only cpu 1150mhz and dsp default and with 900mhz and 600dsp


With 1150mhz cpu and default dsp these speed fps

hd 16:9 or hd 4:3
Audio-video speed ok , but not synchronized .
You speak but your mouth as not fast than your voice.

16:9 22 fps
4:3 29fps


Real synchronized and 100x100 speed with :

-dvd 16:9 30 fps
-dvd 4:3 30 fps
-Lowest resolutions ..

With 900mhz cpu and 600 dsp:

-hd 16:9 24 fps
-hd 4:3 29 fps
-dvd 16:9 30 fps
-dvd:4:3 30 fps

Playing 720p all formats mov-mkv-mp4-flv
Not synchronized audio-video into maemo.

In nitdroid yes synchronized . For example this video is very old but you can see 720p synchronized into nitdroid http://www.youtube.com/watch?v=SlgdE-DMCyc

720Prec.deb ammyt app yes open xterminal but not open camera window but recording because you close the xterminal and into filemanager you can see a new video but without audio.

I am testing.............and trying.....test in progress..........

damn my n900 showing unable to play media files and for all media files its showing this same error

Use sib player the best solution for you, my before post edited