The Following 35 Users Say Thank You to kimmoli For This Useful Post: | ||
243kof, 48GX, benny1967, Bundyo, Daneel, dirkvl, Faz, fw190, gordon_pcb_designer, HtheB, jalyst, Jordi, juiceme, Kabouik, maluka, mariusmssj, Martinhsl68hw, mece, minimos, mrsellout, nodevel, pycage, Rauha, rcolistete, skvark, sombrer0, szopin, TeHeR, tissot, Tujutzki, vitaminj, Wanker, wnt, zamorph |
|
2014-01-27
, 22:57
|
|
Posts: 562 |
Thanked: 2,744 times |
Joined on Dec 2013
@ Espoo, Finland
|
#2
|
|
2014-02-02
, 22:50
|
Posts: 100 |
Thanked: 389 times |
Joined on Dec 2013
@ Finland
|
#3
|
|
2014-02-03
, 22:10
|
|
Posts: 562 |
Thanked: 2,744 times |
Joined on Dec 2013
@ Espoo, Finland
|
#4
|
|
2014-02-05
, 17:44
|
|
Posts: 562 |
Thanked: 2,744 times |
Joined on Dec 2013
@ Espoo, Finland
|
#5
|
echo 67 > /sys/class/gpio/export echo out > /sys/class/gpio/gpio67/direction # changing direction will set output to low echo 0 > /sys/class/gpio/gpio67/value echo 1 > /sys/class/gpio/gpio67/value
The Following 5 Users Say Thank You to kimmoli For This Useful Post: | ||
|
2014-02-05
, 18:57
|
|
Posts: 562 |
Thanked: 2,744 times |
Joined on Dec 2013
@ Espoo, Finland
|
#6
|
The Following 5 Users Say Thank You to kimmoli For This Useful Post: | ||
|
2014-02-13
, 08:53
|
|
Posts: 562 |
Thanked: 2,744 times |
Joined on Dec 2013
@ Espoo, Finland
|
#8
|
The Following 5 Users Say Thank You to kimmoli For This Useful Post: | ||
|
2014-02-13
, 12:04
|
Posts: 123 |
Thanked: 268 times |
Joined on Dec 2009
@ Helsinki, Finland
|
#9
|
|
2014-02-20
, 10:11
|
Posts: 12 |
Thanked: 24 times |
Joined on Feb 2014
@ Espoo, Finland
|
#10
|
NOTICE:
Devaamo has lots of unassembled myhalf PCBs (maybe some component-kits too).
Please approach them if you need only one (or two)
Clip to attach Devaamo board (0.8mm) can be printed from this STL file:
https://github.com/kimmoli/myhalf/bl...-clip-08mm.stl
NEW Devaamo modified design V1.20 in my github now
https://github.com/kimmoli/devaamoMyhalf
The tool for probing and debugging I2C bus of Jolla.
Installer package: Download here
Source code: github
Since 1.0.4.20 i2ctool can be started from application launcher icon (and does not need root-rights)
I2C addressing used is the correct 7-bit (so don't mind the read/write bit)
If you start i2ctool from command line, it provides messages also there.
Last edited by kimmoli; 2014-04-07 at 13:49.