Active Topics
-
Porting apps to Leste (29)
to Maemo 7 / Leste by Arno_11 - 3 days, 13 hrs ago -
Install Fonts in N900 (68)
to Maemo 5 / Fremantle by teroyk - 4 days, 16 hrs ago - more...
|
2009-12-28
, 21:47
|
|
Posts: 237 |
Thanked: 157 times |
Joined on Dec 2009
@ San Diego, CA
|
#22
|
Originally Posted by smage
Might be helpful to include firmware localization as well
112 here as well.
I'm at 112 on US firmware PR1.0
|
|
2009-12-28
, 22:26
|
|
Posts: 75 |
Thanked: 59 times |
Joined on Nov 2009
@ Gilbert, AZ, USA
|
#24
|
mine was 111 with US firmware. The datasheet (http://www.datasheetdir.com/SI4713+Rf-Transmitters) lists a programmable transmit output voltage to be 118dBuV typical with a test condition of 102-118 dBuV for the accuracy spec. I'll go out to the car in a bit and see if I notice any diff setting this to 118.
Interestingly, /sys/class/i2c-adapter/i2c-2/2-0063/region_bottom_frequency contains 87500 but the GUI only goes down to 88.1 .. i'd love to be able to use the 87.5-87.9 freqs too...
Last edited by jsharper; 2009-12-28 at 22:36. Reason: add missed word "typical"
Interestingly, /sys/class/i2c-adapter/i2c-2/2-0063/region_bottom_frequency contains 87500 but the GUI only goes down to 88.1 .. i'd love to be able to use the 87.5-87.9 freqs too...
Last edited by jsharper; 2009-12-28 at 22:36. Reason: add missed word "typical"
|
|
2009-12-28
, 22:35
|
|
Posts: 75 |
Thanked: 59 times |
Joined on Nov 2009
@ Gilbert, AZ, USA
|
#25
|
Ok, I noticed a decent improvement of 118 over 111 or 112. It cut the static down quite a bit...
Anyone find a way to manually control the tx freq to force, say, 87.9?
Anyone find a way to manually control the tx freq to force, say, 87.9?
|
|
2009-12-28
, 22:40
|
|
Posts: 237 |
Thanked: 157 times |
Joined on Dec 2009
@ San Diego, CA
|
#26
|
Originally Posted by jsharper
Did it keep your changed power level after a disabling/reenabling of the transmitter?
Ok, I noticed a decent improvement of 118 over 111 or 112. It cut the static down quite a bit...
Anyone find a way to manually control the tx freq to force, say, 87.9?
After a reboot?
|
|
2009-12-28
, 22:42
|
|
Posts: 75 |
Thanked: 59 times |
Joined on Nov 2009
@ Gilbert, AZ, USA
|
#27
|
no, as soon as i turned off the fm transmitter, power_level got set back to 111. you'll need to find a solution to keep setting it
|
|
2009-12-28
, 22:48
|
|
Posts: 127 |
Thanked: 54 times |
Joined on Nov 2009
|
#28
|
112 - in the UK.
Have rotten reception - none in the car (Saab 95) and dreadful on my one remaining FM radio in the house - has to be touching the radio to work.
Have rotten reception - none in the car (Saab 95) and dreadful on my one remaining FM radio in the house - has to be touching the radio to work.
|
|
2009-12-28
, 22:50
|
|
Posts: 4 |
Thanked: 0 times |
Joined on Dec 2009
@ Poland
|
#29
|
Originally Posted by ceza_21
Do You have original volvo radio? I have SC-816 with rear side window antenna and when n900 is on dash FM transmission is very poor quality...
i use 107.3 in cambridgeshire area and east london.sound quality is quite good in my volvo v70...
 |
|
2009-12-28
, 23:15
|
|
Posts: 1,743 |
Thanked: 1,231 times |
Joined on Jul 2006
@ Twickenham, UK
|
#30
|
Firmware 51-1 here and the value now is 118 on the pre-production device and 113 on the Summit one.
Kinda weird.
It's set a 90.5 on the Summit one and 88.1 on the pre-prod one.
If I disable the FM Transmitter, tough, that profile is still there.
Kinda weird.
It's set a 90.5 on the Summit one and 88.1 on the pre-prod one.
If I disable the FM Transmitter, tough, that profile is still there.
112 here as well.
computer 1st, phone 2nd