Active Topics

 


Reply
Thread Tools
Posts: 151 | Thanked: 77 times | Joined on Dec 2009
#1
Hey I've got an N900 that I've tinkered with over the months and I feel like I've done enough reckless things to "dirty" up the kernel.. or firmware.. or something. I'm not computer illiterate but I'm no programmer.

Anyway, is there a way to completely renew my N900 as far as software is concerned? I've already formatted my SD card and backed up my contacts and I want to make the N900 as if I have just opened the box with none of my old files or anything.

Basically I want to reinstall the OS as you would do on a windows machine.

How do I go about doing this?
 
optimistprime's Avatar
Posts: 417 | Thanked: 182 times | Joined on Jan 2010 @ At your mom's house, with my feet up!
#2
flash it......the emmc too.
__________________
I like my girls like I like my toys, MADE IN JAPAN!!!
 

The Following User Says Thank You to optimistprime For This Useful Post:
Posts: 151 | Thanked: 77 times | Joined on Dec 2009
#3
Originally Posted by optimistprime View Post
flash it......the emmc too.
Ah, reflash was the word I was looking for, thank you.

I'll do some googling and come back if I have any problems.
 
Posts: 151 | Thanked: 77 times | Joined on Dec 2009
#4
 
Posts: 113 | Thanked: 54 times | Joined on Dec 2009 @ Australia
#5
Originally Posted by Lazarpandar View Post
Hehe, found it

http://discussions.europe.nokia.com/...ata/m-p/591877
Here is the maemo.org guide to
__________________
♦ Nokia N900 (RX-51) ♦ Korean Made ♦ Week 49/2009 ♦
Firmware 10.2010.19-1
 

The Following User Says Thank You to Magel282 For This Useful Post:
Posts: 131 | Thanked: 78 times | Joined on May 2010
#6
be sure to check out the wiki. Your OS has a lot to do with it. I have W7 x64, which isn't readily compatible, so I had to use a W7 x86 (32-bit) computer to flash.

install maemo flasher
dl the .bins to the folder with flasher-3.5.exe
open up cmd prompt, cd to the flasher-3.5.exe directory.
turn N900 off completely.
hold down "u" and connect it to the computer.
once you see the usb icon at the top right, let go of "u."

execute
Code:
flasher-3.5.exe -F RX-51_2009SE_2.2009.51-1_PR_COMBINED_MR0_ARM.bin -f
followed by

Code:
flasher-3.5.exe -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f -R
notice the -R is only at the end of the second command.
 

The Following User Says Thank You to m0da For This Useful Post:
Reply


 
Forum Jump


All times are GMT. The time now is 18:24.