Page 7 of 8 « First 56 7 8
Reply
Thread Tools
jean2323 is offline jean2323
2010-08-18 , 13:42
Posts: 168 | Thanked: 29 times | Joined on Dec 2009
#61
[QUOTE=Rob1n;790440]Removing the battery for a short while should get things working again (until the next time you run fcamera).

it's not working ... i removed the battery for 1-2 min ... restarted
LEDs not working!
they show missed calls, IMs etc ... but not charging!
 
jean2323 is offline jean2323
2010-08-18 , 13:44
Posts: 168 | Thanked: 29 times | Joined on Dec 2009
#62
i disabled from setting charging notifications
and reenabled ... now it works

thanks
 
bnolsen is offline bnolsen
2010-08-19 , 22:33
Posts: 6 | Thanked: 0 times | Joined on Aug 2010
#63
Originally Posted by james174 View Post
To further add it seems Toshiba offers a new Dynastron CMOS image sensor with a pixel pitch of 1.75 μm, reduced from 2.2 μm. The 5mp version aka 5-M Dynastron ET8EM2 ** has the following features:-

Optical Format - 1/3.2 inch

Pixel Count - Approx. 5 M 2,584(H）× 1,960(V)

Cell Size - 1.75μm × 1.75μm

Output Signaling - RAW

Frame Rate - 12 fps at full resolution

Control Bus - I2C

Image Signal Processing - None
Youch the small cells explain why the images are so noisy. Thanks for getting me in the ballpark to get started. I'm using the n900s camera to simulate a fisheye camera mounted on a rig. I'm curious to see how good the optics really are on this.
 
ETalvala is offline ETalvala
2010-08-19 , 23:26
Posts: 46 | Thanked: 392 times | Joined on Apr 2010 @ Stanford University
#64
Originally Posted by bnolsen View Post
Last night I tested dcraw -d (raw bayer)
One other question...is the focus mechanical or purely software? I can run the calibration at diff focus levels to test myself but its helpful to know ahead of time.
.
The lens actually moves for focus, so it's mechanical.
 

The Following User Says Thank You to ETalvala For This Useful Post:
RafaLL92's Avatar
RafaLL92 is offline RafaLL92
2010-08-26 , 17:08
Posts: 116 | Thanked: 77 times | Joined on Jan 2010
#65
Fcam is simply a-w-s-o-m-e.
 
bnolsen is offline bnolsen
2010-08-27 , 21:53
Posts: 6 | Thanked: 0 times | Joined on Aug 2010
#66
Originally Posted by ETalvala View Post
The lens actually moves for focus, so it's mechanical.
Ouch...it would be useful to have the ability to hard lock the focus by default...otherwise any calibration won't hold.
 
mothmanex is offline mothmanex
2010-09-04 , 18:47
Posts: 95 | Thanked: 19 times | Joined on Dec 2009 @ Mexico, Monterrey.
#67
Fcam doesn't appear on on the catalogs. (Devel, extras-testing, extras).
 
gohan2091 is offline gohan2091
2010-09-06 , 16:56
Posts: 271 | Thanked: 20 times | Joined on Apr 2009 @ United Kingdom
#68
Originally Posted by eme View Post
fcamera vs. blessN900 ....
were is the difference?

pro/non-pro?

thanks
What is the difference between fcamera and BlessN900?
 
hschmitt is offline hschmitt
2010-09-08 , 14:43
Posts: 159 | Thanked: 122 times | Joined on Nov 2009
#69
Will you promote the current version of fcam-drivers to Extras or will you do more iterations?
There are several packages depending on it.
__________________
Your packages are waiting too long to get tested? HowTo encourage at TMO.
 
ETalvala is offline ETalvala
2010-09-08 , 22:59
Posts: 46 | Thanked: 392 times | Joined on Apr 2010 @ Stanford University
#70
I just promoted fcam-drivers to extras. There's possibly a crash bug in it somewhere, but it might take us a while to track it down - it's very intermittent. We're going to rev fcamera at least once more before promoting to extras, since the front LED use isn't working right for everyone.
 

The Following 4 Users Say Thank You to ETalvala For This Useful Post:
Reply
Page 7 of 8 « First 56 7 8

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 11:05.

Contact Us - Home - Archive - Top