Page 55 of 77 « First 455354 55 565765 Last »
Reply
Thread Tools
vir3us
2010-10-26 , 12:47
Guest | Posts: n/a | Thanked: 0 times | Joined on
#541
Please help me. When i plug my n900 with nitdroid all loaded up into the pc it cant install the android driver. So this means i cant see whats on the sd card nor put stuff onit. Direct link for correct driver please, windows 7 ultimate x64. Cheers
 
Descalzo's Avatar
Descalzo is offline Descalzo
2010-10-26 , 13:33
Posts: 369 | Thanked: 167 times | Joined on Mar 2010
#542
Originally Posted by Armand360 View Post
i used the auto installer, and i just realized that it said it is downloading Nitdroid 0.0.8. i thought the auto installer installs 0.0.7?
The auto-installer installs the latest version. Usually.

Sadly, the auto-installer, NitDroid, and the wiki are not developed on the same schedule. There's a lot of info in the wiki and they seem to have a hard time getting to all of it.

At first I was a little ticked, then I decided I'd rather dj_steve and e-yes and that other guy whose handle I can't remember spend their brain cycles working on NitDroid instead of working on the website.
__________________
N900
 
jd4200's Avatar
jd4200 is offline jd4200
2010-10-26 , 15:14
Posts: 451 | Thanked: 424 times | Joined on Apr 2010 @ England
#543
Since upgrading to PR.1.3, when I try to use the auto-installer it just hangs on "formatting mmcblk1p2 ext3". I've let it doing that for around half an hour, tried reformatting the card and doing it again, but still nothing?

Anyone else had this problem?

Edit: Sorted it. I had to manually repartition my SD card, the auto-install then works fine.
__________________
BTC:
19ePiXZUdxqNAq9tStLzZV4dduSQeGPJzj
Last edited by jd4200; 2010-10-26 at 15:56.
 
Willowave is offline Willowave
2010-10-28 , 00:52
Posts: 27 | Thanked: 10 times | Joined on Jul 2008 @ Sioux Falls SD
#544
I'm curious as to what would happen if I tried to use the autoinstaller on the N800? I'm trying to do the N800 instructions from the wiki, and I'm having troubles with my linux seeing my N800 correctly (Getting "error claiming usb interface: Device or resource busy" and I guess it's not uncommon, but I've tried all the suggested fixes and it's still not working.) so I'm wondering....how bad could it be? lol
 
champus is offline champus
2010-10-28 , 10:15
Posts: 23 | Thanked: 11 times | Joined on Sep 2010
#545
Originally Posted by jd4200 View Post
Since upgrading to PR.1.3, when I try to use the auto-installer it just hangs on "formatting mmcblk1p2 ext3". I've let it doing that for around half an hour, tried reformatting the card and doing it again, but still nothing?

Anyone else had this problem?

Edit: Sorted it. I had to manually repartition my SD card, the auto-install then works fine.
http://forum.nitdroid.com/index.php?topic=233.0
 
Netweaver is offline Netweaver
2010-10-28 , 10:57
Posts: 323 | Thanked: 180 times | Joined on Oct 2009 @ Gent, Belgium
#546
Does anyone know if NITdroid is going to switch to the u-boot method instead of the flash wearing kernel reflash whenever a OS change is required?

Of course I'm hoping for that only after the release of the pending 0.0.9

It looks the N900 is going the u-boot way overall (PR1.3, Meego in genera), the multiboot solution was just a quick way to get the requirements fulfilled but now in PR1.3, there should be build-in support to do things in a better, more standard way.

Thanks.
 

The Following User Says Thank You to Netweaver For This Useful Post:
abhideva is offline abhideva
2010-10-30 , 05:24
Posts: 86 | Thanked: 0 times | Joined on May 2010 @ india
#547
Originally Posted by kevinp93 View Post
Well, I installed Nitdroid the other day using the Autoinstaller and it is not very difficult.

Here is the step by step instruction.

It is recommended that you disable the 'extra-devel' in maemo, as the installer from that repo has errors. For more info visit this thread.

hi guys , i have been following the steps given below but when i type the 3rd command , this is the situation .....


BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ $ sudo gainroot
Root shell enabled


BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/home/user # umount /dev/mmcblk1p1
/home/user # sfdisk -uM /dev/mmcblk1 << EOF
> ,<6100>,C
> ,,L
> ,,
> ,,
> EOF
Checking that no-one is using this disk right now ...
OK

Disk /dev/mmcblk1: 243328 cylinders, 4 heads, 16 sectors/track
Old situation:
Warning: The partition table looks like it was made
for C/H/S=*/96/22 (instead of 243328/4/16).
For this listing I'll assume that geometry.
Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from 0

Device Boot Start End MiB #blocks Id System
/dev/mmcblk1p1 4 7603 7600 7782400 b W95 FAT32
start: (c,h,s) expected (3,84,9) found (0,130,3)
end: (c,h,s) expected (1023,95,22) found (969,95,22)
/dev/mmcblk1p2 0 - 0 0 0 Empty
/dev/mmcblk1p3 0 - 0 0 0 Empty
/dev/mmcblk1p4 0 - 0 0 0 Empty
trailing junk after number

sfdisk: bad input

help needed , i have tried the auto-installer but its getting stuck at
FORMATTING /dev/mmcblk1p2 .....
help needed .....
__________________
abhi ............
 
thefoxtrot's Avatar
thefoxtrot is offline thefoxtrot
2010-10-30 , 05:59
Posts: 144 | Thanked: 32 times | Joined on Jan 2010 @ Cali
#548
Is it possible to boot Maemo again once Nitdroid is installed? Like what happens after every reboot, is there just an option of which one you want to boot up?
 
Descalzo's Avatar
Descalzo is offline Descalzo
2010-10-30 , 06:47
Posts: 369 | Thanked: 167 times | Joined on Mar 2010
#549
Originally Posted by thefoxtrot View Post
Is it possible to boot Maemo again once Nitdroid is installed? Like what happens after every reboot, is there just an option of which one you want to boot up?
Power on the device with the keyboard open. You should see a menu,
__________________
N900
 

The Following 2 Users Say Thank You to Descalzo For This Useful Post:
clovis86 is offline clovis86
2010-10-30 , 08:57
Posts: 575 | Thanked: 621 times | Joined on May 2010
#550
Originally Posted by abhideva View Post
hi guys , i have been following the steps given below but when i type the 3rd command , this is the situation .....


BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ $ sudo gainroot
Root shell enabled


BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/home/user # umount /dev/mmcblk1p1
/home/user # sfdisk -uM /dev/mmcblk1 << EOF
> ,<6100>,C
> ,,L
> ,,
> ,,
> EOF
Checking that no-one is using this disk right now ...
OK

Disk /dev/mmcblk1: 243328 cylinders, 4 heads, 16 sectors/track
Old situation:
Warning: The partition table looks like it was made
for C/H/S=*/96/22 (instead of 243328/4/16).
For this listing I'll assume that geometry.
Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from 0

Device Boot Start End MiB #blocks Id System
/dev/mmcblk1p1 4 7603 7600 7782400 b W95 FAT32
start: (c,h,s) expected (3,84,9) found (0,130,3)
end: (c,h,s) expected (1023,95,22) found (969,95,22)
/dev/mmcblk1p2 0 - 0 0 0 Empty
/dev/mmcblk1p3 0 - 0 0 0 Empty
/dev/mmcblk1p4 0 - 0 0 0 Empty
trailing junk after number

sfdisk: bad input

help needed , i have tried the auto-installer but its getting stuck at
FORMATTING /dev/mmcblk1p2 .....
help needed .....
there is a patch for this issue in nitdroid forum :
think this one :
http://forum.nitdroid.com/index.php?topic=141.0
 
Reply
Page 55 of 77 « First 455354 55 565765 Last »

Tags
bada rox, face coconut, face palm, nitdroid n900

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 17:12.

Contact Us - Home - Archive - Top