Notices

can anyone please help me. how to install this driver. i got kp49 guru meditation. please help me. plzzzzzz

it is not userfriendly I have to type the mac address it is annoying

Press ENTER to stop the PURGE

ioctl(SIOCSIWMODE) failed: Device or resource busy

ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211,
ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Make
sure RFMON is enabled: run 'airmon-ng start wlan0 <#>'
Sysfs injection support was not found either.

because I get this error? I have aircrack, injection driver(wl1251) and kp-49

how did u install w1251 driver. my one faced problem. guru meditation error. required kernel files not found and my stock kernel also rebooted continuously. help me

Just copy and decompress the file wl251, do not run the installation kernel (kp-46modified), reinstall apt-install kernel-power from x-terminal to execute the script wl251 only:

sudo gainroot
sh MyDocs / purge.sh

or (this is to use the driver, on any network):

Using the driver
--------------------

This procedure is required after every reboot of your phone, if you want to
use this driver!

* Open X Terminal

* Gain root access

~$ sudo gainroot

* Load the driver

# cd MyDocs/wl1251-maemo/binary/compat-wireless
# sh load.sh

* Unloading the driver (just in case you run into problems and want to
switch back to the stock wl12xx driver)

# sh unload.sh

you mean i will do as the readme file suggests. downgrade those files to power46. and then after installing and before rebooting i will just install kernel-power and then reboot? but y did my stock kernel load.

OR,

can i just download the " Version 0.1 package including binary for kernel-power <= v49 (141 MB)" from here >>> http://david.gnedt.eu/blog/wl1251/

which one is fine? are both the same thing??

kp-49 is compatible with bleeding-edge wl1251; Instructions are for kp-46

yes i know. i saw thatthe insturctions are for kp46. where are the instructions for kp49? should i download the above fileand install that one??

You will not understand, kp-49 is Compatible with bleeding-edge and wl1251

Just copy and decompress the file wl251, do not run the installation kernel (kp-46modified), reinstall apt-install kernel-power x-terminal from the script to execute wl251 only:

sudo gainroot
sh MyDocs / purge.sh

or (this is to use the driver, on Any Network):

Using the driver
--------------------

This procedure is required after every reboot of your phone, if you want to
use this driver!

* Open X Terminal

* Gain root access

~ $ Sudo gainroot

* Load the driver

# Cd MyDocs/wl1251-maemo/binary/compat-wireless
# Sh load.sh

* Unloading the driver (just in case you run into problems and want to
switch back to the stock wl12xx driver)

# Sh unload.sh

Simple, do not have to do more

after untarring the file with

~$ cd MyDocs
~/MyDocs$ tar -xzvf wl1251-maemo-0.1.tar.gz
the next step is --

cd wl1251-maemo/binary/kernel-power
# dpkg -i kernel-power_2.6.28-maemo46-wl1_armel.deb
# dpkg -i kernel-power-headers_2.6.28-maemo46-wl1_armel.deb
# dpkg -i kernel-power-modules_2.6.28-maemo46-wl1_armel.deb
# dpkg -i kernel-power-flasher_2.6.28-maemo46-wl1_armel.deb

i wont perform these dpkg steps rather after untarring i will install kernel-power by typing apt-get install kernel power . then reboot?

or i will install these 4files then install kernel power?

i am sorry for giving u so much trouble but thanks a lot for not scolding me