Active Topics
-
Install Fonts in N900 (67)
to Maemo 5 / Fremantle by panjgoori - 12 hrs, 20 mins ago -
Nokia Booklet 3G (RX-75) Drivers (60)
to Alternatives by Maemish - 4 days, 19 hrs ago - more...
|
2011-06-14
, 15:06
|
|
Posts: 83 |
Thanked: 142 times |
Joined on Jun 2011
@ Paris, France
|
#22
|
Originally Posted by stevomanu
Hi ! I'm the one who wrote the script. It's great to see people reacting so much in such a short time !
im getting this error any ideas why
Code:cat: cannot open '/temp/yamas.txt' : no such file or directory
i have wget installed but still same issue ..
great script thou thanks for all help
Regarding this error, the path to which the log is saved should be /tmp/ and not /temp/
Originally Posted by laasonen
There is a more complete version available on my website http://comax.pagesperso-orange.fr if you want to run it on a laptop.
Decided to give the script a shot. At least my laptop running Arch Linux on WPA2-PSK protected WLAN staid secure.
Originally Posted by vi_
Yup !EVERYONE ELSE. Make sure you run this script as root, DOH!
Please report any error either by mail directly to me (you'll find it on my website), or on pcscience.info page. You can of course post it here to get help from members, but I might not check very often...
I hope you like it, cheers !
| The Following 18 Users Say Thank You to comaX For This Useful Post: | ||
|
|
2011-06-14
, 15:08
|
|
Posts: 1,680 |
Thanked: 3,685 times |
Joined on Jan 2011
|
#23
|
Originally Posted by comaX
Holy fvck, you are comaX!
Hi ! I'm the one who wrote the script. It's great to see people reacting so much in such a short time !
Regarding this error, the path to which the log is saved should be /tmp/ and not /temp/
There is a more complete version available on my website http://comax.pagesperso-orange.fr if you want to run it on a laptop.
Yup !
Please report any error either by mail directly to me (you'll find it on my website), or on pcscience.info page. You can of course post it here to get help from members, but I might not check very often...
I hope you like it, cheers !
Your script rulez.
You rulez.
Thank you for your contribution.
__________________
N900: One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die.
|
|
2011-06-14
, 15:40
|
|
Posts: 529 |
Thanked: 194 times |
Joined on Aug 2010
@ UK
|
#24
|
my bad i added an e in there the problem is
..
Code:
cat: cannot open '/tmp/yamas.txt' : no such file or directory
__________________
 |
|
2011-06-14
, 15:42
|
|
Posts: 472 |
Thanked: 195 times |
Joined on Jun 2010
@ India, Mumbai
|
#25
|
sorry for asking silly question... but what exactly this application does..??
__________________
Knowledge is knowing a tomato is a fruit; Wisdom is not putting it in a fruit salad
Knowledge is knowing a tomato is a fruit; Wisdom is not putting it in a fruit salad
|
|
2011-06-14
, 15:58
|
|
Posts: 92 |
Thanked: 95 times |
Joined on Feb 2010
@ Smyrna, Atlanta / Bangalore, India
|
#26
|
Originally Posted by comaX
Comax..you are the boss..respect and thanks
Hi ! I'm the one who wrote the script. It's great to see people reacting so much in such a short time !
Regarding this error, the path to which the log is saved should be /tmp/ and not /temp/
There is a more complete version available on my website http://comax.pagesperso-orange.fr if you want to run it on a laptop.
Yup !
Please report any error either by mail directly to me (you'll find it on my website), or on pcscience.info page. You can of course post it here to get help from members, but I might not check very often...
I hope you like it, cheers !
I am done installing nmap,ettercap-ng and sslstrip...everything went fine without issues.
I am now running the script and facing the following issues:
Attack is running. You can :
1. Rescan network.
2. Add a target (useless if targeting whole network).
3. Display ASCII correspondence table.
4. Tail-grep hosts through output (make sure there is traffic).
5. Real-time parsing...
6. Quit properly.
Enter the number of the desired option.
mitm_pcsci3nce.sh: line 393: xterm: not found
When i select option 4 i get the "xterm:not found" error.
And also after i scan the network and add a target how do i get the username and passwords
Thanks for the script again
|
|
2011-06-14
, 16:33
|
|
Posts: 92 |
Thanked: 95 times |
Joined on Feb 2010
@ Smyrna, Atlanta / Bangalore, India
|
#27
|
Originally Posted by bipinbn
Comax..you are the boss..respect and thanks
I am done installing nmap,ettercap-ng and sslstrip...everything went fine without issues.
I am now running the script and facing the following issues:
Attack is running. You can :
1. Rescan network.
2. Add a target (useless if targeting whole network).
3. Display ASCII correspondence table.
4. Tail-grep hosts through output (make sure there is traffic).
5. Real-time parsing...
6. Quit properly.
Enter the number of the desired option.
mitm_pcsci3nce.sh: line 393: xterm: not found
When i select option 4 i get the "xterm:not found" error.
And also after i scan the network and add a target how do i get the username and passwords
Thanks for the script again
resolved after doing "apt-get install xterm"
thanks
Bipin
|
|
2011-06-14
, 16:41
|
|
Posts: 111 |
Thanked: 87 times |
Joined on Jan 2010
@ Plovdiv, Bulgaria
|
#28
|
Script is still beta sort of speak. Will take a look at the tail-grep option. However, the main function of the script works flawlessly.
Main post is updated. I will not answer questions as 'what does this do' and etc. .. This script isn't a joke. If you don't know what this is for, you shouldn't even download it.
Main post is updated. I will not answer questions as 'what does this do' and etc. .. This script isn't a joke. If you don't know what this is for, you shouldn't even download it.
__________________
http://pcsci3nce.info
http://pcsci3nce.info
| The Following User Says Thank You to Unhuman For This Useful Post: | ||
|
|
2011-06-14
, 22:52
|
|
Posts: 1,680 |
Thanked: 3,685 times |
Joined on Jan 2011
|
#29
|
Originally Posted by Unhuman
Script is still beta sort of speak. Will take a look at the tail-grep option. However, the main function of the script works flawlessly.
Main post is updated. I will not answer questions as 'what does this do' and etc. .. This script isn't a joke. If you don't know what this is for, you shouldn't even download it.
Point 1. This doesn't work by your instructions.
Point 2. Please explain this error here:
Code:
Enter IP adresse(s). 192.168.1.2 Targeting 192.168.1.2 on 192.168.1.1 on wlan0 with Ettercap Attack should be running smooth, enjoy. Warning: Cannot convert string "nil2" to type FontStruct Attack is running. You can : 1. Rescan network. 2. Add a target (useless if targeting whole network).
__________________
N900: One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die.
| The Following User Says Thank You to vi_ For This Useful Post: | ||
|
|
2011-06-15
, 01:37
|
|
Posts: 1,463 |
Thanked: 1,916 times |
Joined on Feb 2008
@ Edmonton, AB
|
#30
|
you guys are "evil" but also increasing the value of the n900...
I thought this was going to make a fake AP but someone mentioned arp poisoning, I guess it works on whatever network you are associated then? I wonder how it works though, if it lets you do any target website, is the n900 pretending to be the default gateway?
I thought this was going to make a fake AP but someone mentioned arp poisoning, I guess it works on whatever network you are associated then? I wonder how it works though, if it lets you do any target website, is the n900 pretending to be the default gateway?
 |
| Tags |
| pentesting, tester of pens |
«
Previous Thread
|
Next Thread
»
|
All times are GMT. The time now is 04:24.
My name was Maemo, then it became Meego and now I'm getting a third one. I am Sailfish.