Posts: 32 | Thanked: 5 times | Joined on Jan 2010
#1
Hello,

Got a big probleme with my N900, this is what happen :

- I start it
- blue led + white page with nokia (for like 6 second)
- black screen and led still blue (for like 6 second)
- white page with nokia and no more led (for like 6 second)
and shutdown.

If i let my N900 plugged to charger, i get :
- Gray screen with Nokia in black with usb icon
- White page with Nokia with usb icon on top right
- Gray screen with nokia in black

Something like that and it make a loop and stop only when i unplug it.

What i must do ?
I must add than i got lot suff like picts than i want keep on phone

Thanx for your advice.

Last edited by Garfield007; 2012-04-12 at 22:39.
 
Andre Klapper's Avatar
Posts: 1,665 | Thanked: 1,649 times | Joined on Jun 2008 @ Praha, Czech Republic
#2
Did you already let it charge for a few hours to a wall socket (instead of USB to computer)?
__________________
maemo.org Bugmaster
 
Posts: 32 | Thanked: 5 times | Joined on Jan 2010
#3
If i let it in wall charger it s make the infinite reboot loop.
 
Posts: 896 | Thanked: 978 times | Joined on Feb 2011 @ Greece, Athens
#4
Have you removed the battery for a couple of minutes?
 
Posts: 32 | Thanked: 5 times | Joined on Jan 2010
#5
Yep, last one was for like 20mn.
 
Posts: 32 | Thanked: 5 times | Joined on Jan 2010
#6
Too sleepy, i hope i gonna get some advice while i go sleep.

Only solution i found, it s to flash kernel only. I Downloaded flasher 3.5, the global image and gonna use this command "flasher-3.5.exe -F RX-51_2009SE_2.2009.51-1_PR_COMBINED_MR0_ARM.bin -f -R" tomorrow if i don t get any advice.

Ty again
 
Posts: 428 | Thanked: 226 times | Joined on Dec 2010 @ Philippines
#7
Originally Posted by Garfield007 View Post
Too sleepy, i hope i gonna get some advice while i go sleep.

Only solution i found, it s to flash kernel only. I Downloaded flasher 3.5, the global image and gonna use this command "flasher-3.5.exe -F RX-51_2009SE_2.2009.51-1_PR_COMBINED_MR0_ARM.bin -f -R" tomorrow if i don t get any advice.

Ty again
That command is not for "kernel-only" flashing. That's the last command that is used in a normal flashing procedure.

This is the command for "kernel-only" flashing:

(for Linux-based OS):

Code:
sudo ./flasher-3.5 -F <firmware-image> --flash-only=kernel -f -R
Just wanted to point out to save you a nightmare of incorrect flashing.
 
Posts: 32 | Thanked: 5 times | Joined on Jan 2010
#8
Big thanx, it s worked.

Gonna keep it until S3 come out

Last edited by Garfield007; 2012-04-13 at 06:50.
 
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 05:43.