Reply
Thread Tools
Posts: 34 | Thanked: 32 times | Joined on Sep 2008
#1
Hello,

I finally got my hands on a import N9 from Austrialia. The phone is unlocked and I can use my US AT&T sim card with no problem.

However, there are Optus Apps installed and many annoying Optus logos and messages all around.

I like to flash the phone and change the phone to a generic firmware. I tried using Navifirm to download the generic firmware and then using Phoenix to flash; but have no success trying to update the firmware or refurbrish it.

I'm getting this error below half way through the flashing process:

Unable to initialize flc flashing

If anybody had successfully change the firmware on their N9, please let me know how it was done.

Thanks!

Last edited by ming387; 2011-10-29 at 15:03.
 

The Following 5 Users Say Thank You to ming387 For This Useful Post:
Posts: 31 | Thanked: 9 times | Joined on Oct 2011
#2
Were you even able to find the firmware on navifirm? I'm in the same boat and would like to do the same.
 
Posts: 34 | Thanked: 32 times | Joined on Sep 2008
#3
Yes, all the N9 firmwares are on Navifirm.

You can try downloading them and try flashing the N9 with it.

Let me know if you have any success.
 
Posts: 31 | Thanked: 9 times | Joined on Oct 2011
#4
Originally Posted by ming387 View Post
Yes, all the N9 firmwares are on Navifirm.

You can try downloading them and try flashing the N9 with it.

Let me know if you have any success.
Ming I found this discussion online. Hopefully you find it useful.

================================================== ==

Quote:
Originally Posted by gragib
I've searched the Nokia Developer website, and the only MeeGo firmware flasher I found was for the N950. Will a similar utility be produced for the N9 in case someone needs it to recover their device to a working state after a mishap?

I one already exists, I'd appreciate a link to it. I have a black 64GB N9.

Thanks.
It's possible, I successfully flashed my 16GB Black N9 from Telstra Australia yesterday, with no issues. Heres how:

Get the maemo flasher released for Harmattan at http://tablets-dev.nokia.com/maemo-d...-downloads.php

You want Flasher 3.12.1 thats the harmattan one, the other flasher-3.5 2.5.2.2 didn't detect my device.

Then you will need to get the firmware image for your device, I used NaviFirm from http://www.symbian-toys.com/navifirm.aspx to get the Telstra branded firmware for my handset.

You want to do a warm-flash ( I have not tried a cold-flash, so do that at your own risk ) of your device. There are instructions at the maemo wiki, http://wiki.maemo.org/Flasher

The command I used was:

flasher -F FIRMWAREIMAGE.bin -f

Worked fine, but still, do at your own risk.
 

The Following 3 Users Say Thank You to DarkgageHD For This Useful Post:
Posts: 34 | Thanked: 32 times | Joined on Sep 2008
#5
I think we need some senior members of this forum to give us some feedbacks before trying.

If you've tried it let me know if it works. Thanks.
 

The Following User Says Thank You to ming387 For This Useful Post:
Posts: 31 | Thanked: 9 times | Joined on Oct 2011
#6
Originally Posted by ming387 View Post
I think we need some senior members of this forum to give us some feedbacks before trying.

If you've tried it let me know if it works. Thanks.
I agree with you. I'm little gun shy at this point to try. But would like to do it, provided it works.
 

The Following 2 Users Say Thank You to DarkgageHD For This Useful Post:
Posts: 1 | Thanked: 0 times | Joined on Oct 2011
#7
hi all

i try to change firmware by HARMATTAN flasher


is begin ok and flash but when flash last one roofs go to 75% and error

now phone die when do flash again and conect cable to n9

pc detect and go and after min detect and go and

HARMATTAN flasher can not detect

some one tell me battry but im not try so is rally battry or i lose boot or what ??????????

thx
 
Posts: 31 | Thanked: 9 times | Joined on Oct 2011
#8
Well I tried to flash via phoenix but it failed. I know someone has been able to. I got it into test mode but not any further...
 
Posts: 25 | Thanked: 2 times | Joined on Dec 2011
#9
Originally Posted by DarkgageHD View Post
Ming I found this discussion online. Hopefully you find it useful.

================================================== ==

Quote:
Originally Posted by gragib
I've searched the Nokia Developer website, and the only MeeGo firmware flasher I found was for the N950. Will a similar utility be produced for the N9 in case someone needs it to recover their device to a working state after a mishap?

I one already exists, I'd appreciate a link to it. I have a black 64GB N9.

Thanks.
It's possible, I successfully flashed my 16GB Black N9 from Telstra Australia yesterday, with no issues. Heres how:

Get the maemo flasher released for Harmattan at http://tablets-dev.nokia.com/maemo-d...-downloads.php

You want Flasher 3.12.1 thats the harmattan one, the other flasher-3.5 2.5.2.2 didn't detect my device.

Then you will need to get the firmware image for your device, I used NaviFirm from http://www.symbian-toys.com/navifirm.aspx to get the Telstra branded firmware for my handset.

You want to do a warm-flash ( I have not tried a cold-flash, so do that at your own risk ) of your device. There are instructions at the maemo wiki, http://wiki.maemo.org/Flasher

The command I used was:

flasher -F FIRMWAREIMAGE.bin -f

Worked fine, but still, do at your own risk.
Hi whats the difference between a warm and a cold flash .. pls explain .. i have two large files downloaded from Navi thing .. and whats their use and which should i use .. ?

thanks
 
Posts: 29 | Thanked: 2 times | Joined on Feb 2013
#10
Has anyone a new link to winflasher as the link in this thread is no longer active. thanks in advance
 
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 10:44.