Notices

so to make it even easier for all to change and test new frequencies a shell script was made!
and please if you are new at over-clocking then read this
okay so now all you got to do is:

1. install "rootsh" also can be found in the app manager
2. unzip and move the file attached to MyDocs in your N900
3. open the terminal and type in the folowing:4.you will get this:


note: -in case you dont have the power kernel installed the script will auto detect and install it
-you just need to do the 4th step from the second use onwards
-you can type in the code

Code:

help

to get the instructions


okay so lets say you want a starving configuration with max. frequency of 950
just typeand so on...
Note: after reboot your phone will go back to the default settings
so to set the frequency above as the new default just type in : its recommended to test the new frequency before making it the new default

and thats it,
few letters and you are all done

now simple enough to uninstall the power kernel you will find an icon in the main menu that will auto deinstall it
and then delete the oc-script from MyDocs

Disclaimer - You are fully responsible for any damage / problems caused by overclocking. Not anyone else.
special thanks for AlMehdi with his help about the detecting code

sounds cool, will try later!
thanks for the effort

most welcome mate
and please do tell me how things turn out

will definately give it a try!
looks too easy! haha

haha thats the point
hope it will help

i tried the script it starting to reboot and gave an error.. once i just checked the cpu frequency using the command and again reboot maybe some script issue.. has it worked for anybody??

which option did you choose?
because i have 2 n900s and they both worked fine
and i had some friends to try it, all worked perfectly
plus the script is just a few commands and has no reboot option what so ever

plus maybe the frequency you might of used does not suit your phone
so try another one

Tried it, works flawlessly. Cheers

what the best v with 900 mhz i have to do ?

well i cant seem to get script going , have done it word for word just like in first post always get the same

sh can open oc-script !!

any body have any ideas would help

many thanks